
A wet shaft will eventually turn into a rusty heap of metal, causing your club to crack or split apart. Solution: Store your clubs indoors or outside under shelter. After playing a game of golf in the rain, use a towel to dry off your clubs.
How to fix a broken golf shaft?
Solution: Choose a high quality epoxy solution with a long dry time. (24 hours). Use a small amount of epoxy, and don’t let it run up the shaft. 4. Your Using a 3 Wood Woods, especially the 3 wood are prone to breaking sooner than other clubs in your set.
How can I avoid breaking my golf clubs?
Solution: Only the head is designed to withstand the forces of a golf swing; the shaft isn’t. To avoid breaking your club, make sure your ball is making clean contact with the head. How Long Should Golf Clubs Last Until They Break?
Why do my golf clubs fly off the shaft?
The point where the shaft and head meet is connected by special adhesive glue called epoxy. Storing clubs in hot temperature day after day causes the epoxy to break down. And without epoxy to hold your head to the shaft, the club head will just fly off. Solution: Don’t expose your clubs to hot temperatures for long periods of time.
Why does my golf ball hit the shaft instead of the head?
This occurs when the ball is making contact with the shaft instead of the club head. Solution: Only the head is designed to withstand the forces of a golf swing; the shaft isn’t.

How do I protect my golf club shafts?
For woods and putters, simply dip the club head into warm soapy water and then towel-dry immediately to avoid any rusting or damage. Keep checking the shaft for nicks, dents and cracks, and clean shafts at least every few rounds.
Do golf shafts break easily?
Given the high prices we usually pay for them, and the fact that they are made of metal, we would be right to assume that golf clubs should not break very easily. But sadly, we are sometimes proven wrong. Strong and durable as they may be, golf clubs can indeed break, and it can happen for a number of reasons.
How do I stop my golf clubs from breaking?
Beginners should always take a few lessons from a seasoned pro to get the basics of the golf swing right. This not only will improve your game at a faster rate but will also protect your clubs. Taking deep divots on every shot on hard turf courses will ultimately weaken the shaft and damage the clubhead.
How hard is it to break a golf shaft?
Golfers have been known to snap a club over their leg, or slam a club on the ground and potentially break it. Unfortunately, golf clubs are not built to hold up to this type of abuse. It is not as difficult as you may think to break a golf club and unfortunately it is quite expensive to fix one.
Why do I keep breaking my driver shaft?
Golf clubs can break due to user error. Broken golf clubs occur when golfers slam the club head into the ground out of frustration. Incorrect storage of the club and poor swing technique will also cause shafts and heads to break.
How long does a golf shaft last?
You can expect a shaft to last 20 years, with other components failing way before any shaft will. The reason for the shafts longevity is because there is little to no force imposed directly on to the shaft. However there is evidence that a shaft made from graphite will have a longer lifespan than a steel shaft.
Do graphite clubs break easily?
Graphite shafts do not break easier than steel shafts. Graphite shafts are more robust, lighter, stiffer, and easier to hit than steel shafts. Graphite is the synthetic material of choice; a lightweight material with superior performance is needed, such as spacecraft and racecars.
Does Taylormade replace broken shafts?
If you have broken your club, please take it in to your nearest retailer for evaluation. The retailer will call in the damaged club, and have it sent in to us for repair/replacement. To exercise our two year warranty on our clubs, you do not need a receipt or proof of purchase unless it is specifically requested.
Do you have to break in new golf clubs?
0:181:27Golf Equipment : How to Break in New Golf Clubs - YouTubeYouTubeStart of suggested clipEnd of suggested clipWell there's not much to do to break in golf clubs they're ready to play when you get them except.MoreWell there's not much to do to break in golf clubs they're ready to play when you get them except. For the thickness the sharpness of that groove.
Do graphite or steel shafts last longer?
The choice comes down to what feels best for you and the skill level you have in your game. It is no longer true that steel shafts are more durable than graphite shafts. Either set will last a lifetime if your equipment is treated properly.
Do golf clubs go dead?
Golf irons will go dead and wear out over time as their grooves and clubface deteriorate from repeated use. Golf technology is always rapidly changing, meaning irons that are older than five years of age are likely outdated and won't perform as well as the latest models.
Are graphite shafts durable?
Graphite Durability. Steel shafts were once considered much more durable than graphite shafts. That's not so much the case anymore. Quality graphite shafts will last as long as you do so long as they are not chipped, cracked, or the laminate-seal is not peeling.
Why is my driver head creaking?
A golf driver head can make creaking or cracking noises because the epoxy has weakened inside and caused the head to come loose from its connection point.
Why is my driver shaft making a cracking noise?
The most common reasons for cracking noises coming from a golf driver shaft are loose bits of epoxy or graphite breaking on the inside.
Why is my driver shaft making a creaking noise?
The leading cause of creaking noises coming from a golf driver shaft is loose bits of epoxy inside the shaft. This seems to occur after a golfer has applied a new coat of epoxy to the head and shaft without allowing enough time for the epoxy to dry.
How to Fix Cracking noise in Driver Head
The first thing you can do when a golf driver shaft starts to make any creaking noises is yanking on the head and grip, twisting them back and forth. If it makes the same sound, you may need to reapply the epoxy on the head or shaft.
Tools Required
A driver shaft adapter screwdriver, which will tighten up that Allen wrench so there are no loose screws inside the grip area (which I suspected). If not available, then use adjustable crescent wrenches instead; however, they take longer because these tools aren’t specifically designed like adapters typically are but work just fine.
Conclusion
A creaking golf driver doesn’t need to cause any concern. It’s usually just a broken parts of epoxy glue, or a loose driver head that causes the problem. Both of these issues can be fixed quickly and at a low price.
How to make a golf club with masking tape?
Step 1. Completely cover the head of the club with masking tape to prevent the head from being scratched during the process. Now, place the club in the vise, so that the middle of the shaft is the part being held in the vise. Make sure the club is held securely.
Can you replace a golf club shaft instead of replacing the entire club?
By Tami Fisher. Replacing a golf shaft instead of replacing the entire club can save money. Once in a while, something happens to cause a golf club shaft to splinter or even break. When this happens, the old shaft must be removed and a new one installed in its place.
How fast can you break a stiff shaft?
After my first post I re-read that you were breaking regular flex and stiff flex shafts. You can break a regular flex shaft across your back by swinging 90 mph or even less. Some stiff shafts only take a little over 100.
Can glue break down if it breaks?
The first one the head came off wasn't the glue breaking down unless it slid off the shaft. If it broke at the hosel, the glue was fine. As far as breaking shafts across your back, yea, take some lessons. Sounds like you're not turning through your finish right or something.
Can SMRT shafts break?
SMRT might not be previously damaged shafts breaking at the hosel. The hosel cone is sharp and if you don't use a debuting tool and clean it up before installing the shaft, there's a good chance it'll shear off right there. I've seen it happen to a bunch of people, looked inside the head and you can see it was an improper install.
How to protect your clubs from damage?
To protect your clubs and prevent them from being damaged, you can use bags to cover the club heads. You can purchase headcovers for all your irons, woods, and clubs. Place your covers over your clubs before your next round of golf. This can significantly improve the life of your golf equipment.
What are the problems with golf clubs?
One of the common problems associated with a golf club is hearing the sound of something rattling inside the clubs.
How to stop a rattling sound in a golf club shaft?
The simplest solution to fix a rattling sound in your shaft would be to remove the grip from the golf club. After removing the grip, you should be able to remove the particles, therefore stopping the rattling noise.
Why does my golf club rattling?
If you continue to hear the rattling it can be because the glue inside the driver’s head may have come off partially. Every club driver’s head is filled with glue to catch such particles. You could try filling it up with rat glue to see if it solves the issues. It’s important to take good care of your golf clubs.
Why does my golf shaft rattle?
Sometimes, even small pieces of rock or stones could have gotten inside the shaft during a game. These could also rattle around the shaft causing too much noise. By removing the grip, you can take out whatever particles are causing the noise.
What is it called when you hit your golf clubs?
Chatter is one of the common ways in which rattle occurs in golf clubs kept inside the golf bag. When you place some clubs together while taking them to the clubhouse, they often hit against each other. (this is called chatter ). Golf club chatter can easily damage your clubs in the long run.
Where is the rattling sound in a golf club?
The rattling sound is usually heard in the driver’s head or inside the shaft . Some people prefer using some DIY repairs to solve this issue, while others prefer replacing the club or the driver. Golf club manufacturers usually use rat glue to ensure that the particles that cause the rattling sound get stuck to it.
How to hold a golf club correctly?
If you have a good grip, you can move and twist the club easily and you have a higher chance of making a good swing. Hold the shaft with your right hand.
Why is my golf club not going down the swing plane?
If the ball starts from the left then goes farther left, then it is more likely that your club is moving from outside to inside the target line.
What does it mean to hit a hook shot in golf?
What is a Hook in Golf. One of the goals of a golfer is to hit straight shots consistently. However, this does not always happen. For a right-handed golfer, a hook shot means when a golf ball goes to the right then curves way to the left. And vice versa, for a left-handed golfer, a hook shot means when a golf ball goes to ...
How to use a thumb jigsaw puzzle?
While it is in an open palm position, move your right thumb so that the side of your thumb touches the forefinger. Place your right hand’s groove on the handle and slide it over your left hand. Your left thumb should fit right into middle of the groove of your right hand just like a jigsaw puzzle.
How to hit straight shots?
In order to hit straight shots, you need full body coordination so that the club hits the ball with a square club face. It is not enough to just know how to stop hooking the ball, you need to put everything that you learned into action. So hurry and head to a driving range and practice hitting straighter shots.
Why do my shots go to the left?
One possible reason why your shots are going to the left is because of your club. You should know which golf club to use for your skill level. Actually changing or adjusting your club is one of the easiest ways on how to stop hooking the ball.
Why is my golf ball going left?
Here are 2 reasons why your golf shots are going to the left. 1. Your club face is closed at impact. No matter how good your grip, stance, or swing is, the position of the club face at impact is the most important factor that will determine the direction that your ball will take.
How to clean rust off golf clubs?
Fill the sink or tub with 2 gallons of warm water and add the 2-liter bottle of cola to the water. Use your scrub brush to vigorously clean all of the rusty areas with the cola-water. Pay special attention to the club's sweet spot and to any grooves where rust might hide. Leave the clubs in the cola-water overnight. Soak towels with the cola-water and wrap them around any exposed parts of the clubs, and soak overnight.
What are golf clubs made of?
Some club materials are prone to rusting. Most golf clubs are made from a combination of steel and titanium. This makes for a great club, but these materials are prone to rusting. Naturally, you want your clubs to look as good as they possibly can, and that means removing any rust.
