Golf-FAQ.com

how to take body off melex golf cart

by Miss Bridget Stehr I Published 2 years ago Updated 1 year ago
image

Use a 1000-grit sandpaper and do the same scrubbing action that you would do for a golf cart with a plastic body. Wash off the sanding dust using cold water from a garden hose when the sanding is completed. Wipe the cart dry thoroughly using a soft microfiber cloth so that no lint is left behind.

Full Answer

Where can I get a Melex golf cart repair manual?

Get melex golf cart repair manual PDF file for free from our online library The main topic of the following eBook is focused on MELEX GOLF CART REPAIR MANUAL, however it did not enclosed the possibility of other extra info as well as details concerning the topic.

How do you seal a fiberglass golf cart body?

Spray the acrylic base coat on the fiberglass body. Apply three to four coats taking care to allow each coat to dry for about 20 minutes. Apply a couple of coats of a sealant or clear topcoat sealer with half an hour drying time between each coat. Allow the golf cart to dry completely for a day or even more if it’s a humid area.

Is it easy to remove the body from an EZGO golf cart?

It is very simple to remove the body off of your EZGO golf cart if you know what to look for. This how to video will… | Golf cart bodies, Ezgo golf cart, Golf carts It is very simple to remove the body off of your EZGO golf cart if you know what to look for.

How do you remove a Yamaha G16 golf cart body?

You can follow the steps below to remove a Yamaha G16 golf cart body. Remove the seat by lifting it upwards. Remove the screws above the shift and under the seat. Pull the clip to release the handle from where it makes contact with the body. Loosen the knurl nut and remove the knob to take out the choke cable from the engine compartment.

image

How do you take a golf cart body off?

1:4913:38How to Remove & Install Club Car Precedent Golf Cart Body - YouTubeYouTubeStart of suggested clipEnd of suggested clipThis body push it up before we can pull the body. Off. Once you have the body unclip you can nowMoreThis body push it up before we can pull the body. Off. Once you have the body unclip you can now bring it. Forward. So in order to remove this cowl there's going to be five bolts.

How do you change the body on a EZ Go golf cart?

7:289:35EZGO TXT Body Removal | How to Remove Golf Cart Body | Episode 1YouTubeStart of suggested clipEnd of suggested clipWe've got all the rivets. Taken out of the rear body. So now we'll do is remove this rear bodyMoreWe've got all the rivets. Taken out of the rear body. So now we'll do is remove this rear body before we remove it let's go up front make sure this the front part of the rear body is up.

How do I remove a body from my Club Car DS?

2:537:18VLOG #10 Club Car DS body removal - YouTubeYouTubeStart of suggested clipEnd of suggested clipBody is to use a number three phillips on the forward reverse handle remove those bolts and pull theMoreBody is to use a number three phillips on the forward reverse handle remove those bolts and pull the handle. Out. Then the charger receptacle use the number two phillips.

How do you take the body off a Yamaha g29 golf cart?

0:538:59Yamaha Drive G29 Golf Cart - Body Removal - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo just remove those eight bolts. And then if you have two people you can just grab onto each sideMoreSo just remove those eight bolts. And then if you have two people you can just grab onto each side on the top supports pick the top up set it off to the side.

How do I remove the front of my EZ Go golf cart?

1:442:57EZGO RXV Front Cowl Removal How-To - YouTubeYouTubeStart of suggested clipEnd of suggested clipOkay now that we got the two bolts on the side before out across the top we just grabbed home toMoreOkay now that we got the two bolts on the side before out across the top we just grabbed home to this front Cal it pull it on out keep in mind here. And on the other side is a little clip.

How do you remove the rear bumper on a EZ GO TXT?

0:101:08Jake's E-Z-GO Medalist TXT Rear Bumper Installation - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd then you want to remove the bumper bolts to remove the stock bumper once you have the stockMoreAnd then you want to remove the bumper bolts to remove the stock bumper once you have the stock bolts out of the rear bumper remove the rear bumper.

What are golf cart bodies made out of?

The frames of golf carts are usually made out of steel plates, rods, and tubing. The bodies may be made of sheet aluminum, fiber glass, or sheet steel. Other components, usually plastic or metal, are generally purchased from outside suppliers and assembled to the vehicle.

Can you paint a golf cart body?

If you want to spruce up your golf cart, you can give it a new paint job. You can even make your golf cart stand out by painting the body any color that you want. Painting a golf cart body is not too difficult and can be completed in an afternoon.

What is a cowl on a golf cart?

Cowls are the forward portion of any golf cart where your instruments are mounted and if it were an automobile where the hood might be located. Golf Car Catalog offers a full line of front cowls for EZGO, Club Car, Yamaha and some other golf cart brands.

How can I make my Yamaha G29 golf cart go faster?

6 Ways You Can Make a Golf Cart FasterAdd More Torque to Your Golf Cart.Upgrade Your Golf Cart's Motor.Improve the High-Speed Controller of the Cart.Add Better Golf Cart Tires.Use a Higher Powered Golf Cart Battery.Watch the Weight in Your Golf Cart.

What year is a G29 Yamaha Golf Cart?

2007Yamaha DRIVE / G29 Yamaha began production of the Drive (G29) model in 2007 and continues to make the “Yamaha Drive” today.

How can I make my Yamaha Golf Cart faster?

0:005:15Yamaha G29 Drive Golf Cart Governor Adjustment - MORE SPEED!!YouTubeStart of suggested clipEnd of suggested clipItself by tightening this nut down you're putting more pressure on the spring. So that the governorMoreItself by tightening this nut down you're putting more pressure on the spring. So that the governor has to work harder to pull back on the throttle.

How to restore a golf cart?

Steps. Apply some dish soap all over the golf cart and wash it using a hose fitted with a fine spray nozzle. Use a microfiber cloth to spread the dish-wash soap uniformly, both inside and outside the cart. Take some water in a bottle with a spraying mechanism and spray on the surface that has to be restored.

How to repair a crack in a golf cart?

You can try the following options to repair cracks on a plastic golf cart body. Drill through the crack in a V shape and put a plastic weld on the rear. Fix some plastic tape on the front side so that the weld doesn’t push through. Drill the crack at the end so that it doesn’t become bigger.

How long to wait to remove masking tape after spraying?

Remove the masking tape about 10 minutes after spraying the last coat. Ensure that you don’t touch the paint to avoid smudges. Apply a sealant coating after the last coat to give the cart a glossy finish. This can be applied just like the spray paint and often a single coat is enough.

How to paint a dark cart?

Apply a thin coat of plastic primer spray paint on the surface to be painted. You might need an extra coat if you’re planning to give your dark colored cart a light color. In this case, give a drying time of about half an hour before you apply the second coat. Paint the cart using acrylic or plastic-fusion paint.

How to clean a golf cart with soap?

Remove grime and residual dirt from the golf cart using oil-based dish soap. Wash the soap off using cold water from a hose. Wipe the cart using a towel and let it dry completely.

What is a golf cart made of?

The body of a golf cart is primarily made of sheet steel, fiberglass or sheet aluminum. The frame is generally made of steel while tires, foam seat cushions and steering mechanisms are made of rubber, vinyl and metal. Parts like suspensions, drive trains, motors and brakes use metal. The 1993 model Club Car used an indestructible thermoplastic ...

Is the Taylormade M4 driver adjustable?

Is the TaylorMade M4 driver adjustable? Yes, the TaylorMade M4 driver is adjustable. It’s possible to have twelve different options for the loft, lie angle and face angle, including the standard...

image
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9