- Loosen the nut attached to the governor arm with a 7/16” wrench to turn the shaft.
- Push the governor arm to the back of the cart and grasp it with your hand.
- Turn the governor shaft in the counter-clockwise direction until it cannot be turned further.
- Retighten the nut and let go off your hold on the governor arm.
- This method also helps to slow down the cart.
How do you remove the governor on a golf cart?
1 Loosen the nut attached to the governor arm with a 7/16” wrench to turn the shaft. 2 Push the governor arm to the back of the cart and grasp it with your hand. 3 Turn the governor shaft in the counter-clockwise direction until it cannot be turned further. 4 Retighten the nut and let go off your hold on the governor arm. More items...
How do you bypass the governor on an EZGO golf cart?
You can bypass the governor connection in an EZGO or Yamaha G1 golf cart as given below. Remove the cable connecting the carburetor and the governor. Disconnect the connection between the gas pedal and the governor. Connect the gas pedal directly to the carburetor opening.
How do I disable the governor on my club car?
Place a small rubber band on top of the T at the thickest part where the governor moves. Look behind the governor to find a small metal rod that’s permanently attached to the club car and stretch your rubber band enough to connect it to that metal rod. Screw the plastic plate back in place. Once the plate is back in place, the governor is disabled.
Where is the governor spring on a golf cart?
Locate the governor arm of the golf cart. This is mounted above the rear axle housing and under the cart. Depending on the cart model, there may be a protection plate above the governor. Locate the governor spring in the engine of the cart next to the governor arm.
Can I remove the governor from my golf cart?
The governor generally sits on top of the engine. This is the easiest way to find the carburetor. Once you've followed the cable up to the governor spring, disconnect it there as well. You can save this cable for later use or throw it away.
How do you turn off the governor on a electric golf cart?
Basically, an electric speed governor can be controlled by a tiny metal rod that's located by the clutch of your golf cart. First things first: The electric speed governor is connected to a cable. You can adjust your speed by rotating the nut in a counterclockwise rotation.
How can I make my golf cart governor faster?
3:415:06How to Adjust an E Z Go Golf Cart Governor - WikiVideo - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou can adjust the clutch to send more gas to your engine moving you faster. Find the small metalMoreYou can adjust the clutch to send more gas to your engine moving you faster. Find the small metal rod right next the clutch in the attached cable.
How fast can a golf cart go without a governor?
A typical electric cart without an upgraded speed control tops out around 12 mph.
How do I turn off speed governor?
1:072:00How to remove your car's speed limiter como sacar limitacion de ...YouTubeStart of suggested clipEnd of suggested clipSelect on that and then. When you press cancel it means you're done and the tune will start toMoreSelect on that and then. When you press cancel it means you're done and the tune will start to upload you'll hear the fan kick on and then when you're all done it'll say the press select to enter.
How can I make my electric golf cart go faster without upgrading?
How to Make an Electric Golf Cart Faster Without UpgradesWash Your Cart Properly. ... Inspect the Batteries. ... Refill the Battery Water. ... Check the Gas Pedal and Linkage. ... Measure the Tire Pressure. ... Charge Up Your Battery Unit. ... Lighten Up Your Cart's Weight.
What does removing the governor do?
Removing the governor will increase the maximum rpm of the engine, but the internal parts of the Predator 212 are designed for 3600 rpm. Generally, this isn't an issue with just the governor removal, the internal parts can usually withstand 5000 rpm without breaking apart (unless you go full throttle for too long).
How do you bypass the governor on a small engine?
1:299:11how to bypass the governor on a predator 212 engine - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd then run the cable through there. And then that will allow you to throttle. Up the engine. UsingMoreAnd then run the cable through there. And then that will allow you to throttle. Up the engine. Using the governor now to bypass the governor all you have to do is.
How do you adjust the governor on a gas club golf cart?
This governor can be adjusted by adjusting the cable nut which holds the cable to the throttle lever. By making the cable longer, you effectively prevent it from pulling back the throttle lever, producing a higher top speed for your golf cart.
How do you make a golf cart go 35 mph?
15:0521:34How To Make Golf Cart Run 35 MPH | Navitas 5kw AC ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipOnce you reboot the application the motor map settings is installed. Next thing we're gonna go toMoreOnce you reboot the application the motor map settings is installed. Next thing we're gonna go to settings to the tire diameter we're gonna put in the overall height for our tire diameter - 23.
How do you bypass a speed sensor on a golf cart?
The speed sensor on the EZGO golf cart can be bypassed by unplugging it from the speed controller. By disconnecting the J5 pin on the speed controller, this will cause the golf cart to creep along as the controller will go into limp mode.
Can a golf cart go 25 mph?
A golf cart usually has a maximum speed of about 25 miles per hour. However, many golf carts have maximum speeds that are lower than this. Most manufacturers produce golf carts ranging in speed from 10–25 miles per hour.
What is a golf cart governor?
A golf cart governor is a mechanical device that helps in controlling the maximum speed of the cart when it moves on flat ground. This device prevents the engine RPMs from increasing beyond the recommended specifications.
Where is the governor arm on a golf cart?
Locate the governor arm of the golf cart. This is mounted above the rear axle housing and under the cart. Depending on the cart model, there may be a protection plate above the governor.
How to start a golf cart with a gas pedal?
Locate the gas pedal that is fitted to the governor and remove the connection. Re-route the gas pedal to the carburetor. Remove the bolt present on the shaft of the gas pedal. Slide the shaft upwards so that the gas pedal has more play. Tighten the bolt and start the golf cart.
How fast is an EZGO golf cart?
The top speed of an EZGO golf cart is usually 19.9mph and the average speed is 14mph to 15mph. With governor adjustment, the EZGO cart can go faster by 5 to 10mph.
How to change the speed of a golf cart?
Locate the spring on the differential or carburetor that helps in changing the cart speed by adjusting its tension. Increase the length of the cable that is fitted on to the body of the throttle and clutch of the two-stroke engine.
How to ride a golf cart at full speed?
Ride the cart at full speed over a course of known length. This will ensure that the governor controls the speed of the cart within factory specifications. Fasten the black plastic cover and put the seat back in place. Take care when tightening the nut. The more you tighten, the faster your cart will go.
Can you remove a golf cart governor?
It doesn’t take much time or skill to remove a golf cart governor. With some basic mechanical expertise and general-purpose tools, you can do this yourself. The process is more or less the same in all golf carts.
How to remove governor from golf cart?
How to Remove the Governor From a Golf Cart. You hit the links. The course is open in front of you as far as the eye can see. The only thing holding you back is the put-put-puttering of your golf cart. Golf carts are governed to go anywhere from 12 to 14 miles per hour. But if you've got a few minutes, some simple mechanical know-how and a wrench, ...
Where is the governor on a car?
The governor generally sits on top of the engine . This is the easiest way to find the carburetor. Once you've followed the cable up to the governor, disconnect it there as well. You can save this cable for later use or throw it away.
How fast can a golf cart go?
Golf carts are governed to go anywhere from 12 to 14 miles per hour. But if you've got a few minutes, some simple mechanical know-how and a wrench, you can double the speed of your cart and zip through your round.
How to adjust a gas pedal on a cart?
Using your wrench, remove the bolt on the gas pedal shaft. Slide the shaft up so there is more play in the gas pedal. Tighten the bolt and then start the cart. You may need to adjust the gas pedal shaft a couple of times before you have it to your liking.
What is a governor and how does it work ?
A governor is a device that automatically restricts the flow or speed of a machine. In case you consider applying this modification to your golf cart, note that it will make the engine run faster and with greater thrust which, in turn, will result in higher speeds.
How to remove the governor from a golf cart
The first step is to remove all air from the tires of your golf cart. This is done so that you can place it on a jack without the possibility for it tipping over and falling off. Refer to your owner’s manual if you’re not sure how to do this since each model uses different methods.
Why would you want to do this ?
There are two reasons why some golf cart owners decide to remove the governor from their vehicles.
Safety tips when removing the governor from your golf cart
Removing the governor from your golf cart is a job which requires that you respect certain safety precautions.
Final Thought
Now that you know more about how to remove your governor from a golf cart, go out and do it. However keep in mind that doing so will permanently disable the governor on your golf cart . This means you will lose control over the speed of your engine no matter what you do .
What happens if you have problems with your club car?
If you have problems with your club car due to overheating or other engine troubles, the company often won’t pay to fix it. Writer Bio. Jennifer Eblin has been a full-time freelance writer since 2006. Her work has appeared on several websites, including Tool Box Tales and Zonder.
Can you go to a maximum speed on a golf cart?
If you have a golf cart, in particular a club car, you know that you can only reach a maximum speed before the car levels off. You may have seen others racing around in their club cars and wondered how they got up to such high speed. They did it by disabling their's cars' governor, a little device makes the cart stay below a specific speed.
Does a governor void a club car warranty?
If you have posted speed limits in your area, you will still have to adhere to those. The governor helps keep your club car from overheating when the engine gets too hot. If you adjust the governor you’ll need to check the engine temperature yourself. This automatically voids your warranty.
How to make a cart faster?
Step 1. The first option to making your cart faster is to replace the electronic speed control. This will enable more voltage to pass to the motor, producing the desired result. Unfortunately, this upgrade is not inexpensive as the unit can run anywhere from $100 to $1,000. Step 2.
How fast can a factory cart go?
The factory gear most likely has a 12.5:1 ratio, which allows the cart to achieve somewhere around 14 mph. If you swap out the factory gear for one with an 8:1 gear ratio, you'll up your top end to about 20 mph.
Can you drive a golf cart faster?
It should be noted that the golf cart you are trying to make faster may not be designed to do so. Weigh the options carefully and exercise caution whenever driving a golf cart at any speed. Remember that golf carts are not equipped with seat belts, air bags and other safety equipment that you find in automobiles.
