How to Throw a Roller – A Disc Golf Guide
- Step 1: Disc Selection. If you’re looking for the ultimate beginner’s roller, choose the Roc2. Its large grip and stable...
- Step 2: Aim. Roller throwing is one of the trickiest aspects to doing a roller. It can be difficult to maintain...
- Step 3: Footwork. If you’re a roller shot pitcher, the footwork when throwing the ball...
What is a roller in disc golf?
A roller is a shot thrown on an aggressive anhyzer release angle, which allows the disc to turn over and hit the ground while spinning at a high rate of speed. The spin carries the disc into a roll which takes the disc further down the course.
What is a max distance roller in disc golf?
A max distance roller in disc golf is a type of roller that flies out of the hand on a heavy anhyzer release angle with moderate altitude. Slightly higher altitude on the max distance roller means that this shot travels a fair distance in the air before it hits the ground.
How do disc golf discs work?
The spin carries the disc into a roll which takes the disc further down the course. A roller performed correctly and in the right conditions can drive for 10% – 15% more distance than the disc would have flown if it had been thrown in the air.
How do disc rollers affect disc stability?
Disc stability with rollers tends to be the same as the stability when the disc is flying through the air. Overstable discs want to go left, stable discs want to stay straight, and understable discs want to go right (when throwing RHBH).
What disc to use for distance rollers?
What is cut roller disc golf?
How to learn max distance roller shot?
How much does a roller shot increase the distance thrown?
Why do discs fly in the air?
Which side should a forehand roller be on?
What is the best thing about disc golf?
See more
How do you throw a roller on a disc golf Valley?
To throw a roller, aim low towards the ground, then pull the disc back to a sharp angle. For right-handed players, a backhand roller is pulled down and left, and a forehand roller is pulled down and right.
When should a roller throw be used in disc golf?
Tip #5 Ground Conditions Players sometimes don't consider how the ground is going to impact how their disc will roll. Ideally, you'll want to use a roller when you have very low or no grass at all. Taller grass is obviously going to slow down the ground action when your disc starts to roll.
How do you throw a forehand roller?
1:022:16Disc Golf Tips With Eric Oakley | Field Work | Forehand Rollers - YouTubeYouTubeStart of suggested clipEnd of suggested clipBut making use of your discs is also important we can still use those understable discs and lay themMoreBut making use of your discs is also important we can still use those understable discs and lay them down on that cut angle. And allow them to stand up and then flip late just like a normal roller.
What is the best disc to throw a roller?
Best Disc Golf Roller Disc–WinnerProdigy F7.Discmania FD.Latitude 64 Fury.Westside Hatchet.Innova Leopard.MVP Orbital.Westside Queen.Innova Sidewinder.
How do you throw a distance roller?
2:217:40How to throw rollers! | Disc Golf Beginner's Guide - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe longer that a disc spends rolling on the ground the more resistance it has from the grass or theMoreThe longer that a disc spends rolling on the ground the more resistance it has from the grass or the bumps or different things that it runs into as its rolling.
How do you throw a flick roller?
6:5812:39Forehand (Flick) Rollers - YouTubeYouTubeStart of suggested clipEnd of suggested clipBut it's turning turning turning turning turning. And then landing on its edge. There. It's gonnaMoreBut it's turning turning turning turning turning. And then landing on its edge. There. It's gonna roll to the right a little bit until it slowly starts to stand up and eventually.
What is a cut roller in disc golf?
A cut roller is a roller that works in the opposite direction of the natural turning tendency of the disc. Rollers tend to want to turn in the direction of the flight plate (i.e. RHBH rollers tend to turn right).
What is turnover in disc golf?
A turnover shot is thrown with something more understable so that the disc will carry the turn all the way to the ground. This gives you a big, sweeping left-to-right turn to get around doglegs. They're usually thrown with a lot of air under the disc, so you throw them high and wide.
Can you roll a disc in Frisbee golf?
1:222:20Eric Oakley Disc Golf Roller Shots - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe disc and allowing you to put the disc. Down on the angle that you want it that is you can watchMoreThe disc and allowing you to put the disc. Down on the angle that you want it that is you can watch a lot of top players. They do that there's another style of roller that.
Is the Roadrunner a good roller disc?
Roadrunners are great rollers. They really teach you how to control your roller. If you start out with something that is more stable then you won't get the control part of a roller. I use a champion roadrunner and star stingray for turnover rollers.
Is the Mamba a good roller disc?
Disc Information The Innova Mamba is the most understable high speed distance driver in the Innova line. This disc will help intermediate players get more distance, and will provide the ultimate turn for powerful throwers. This driver is good for tailwind throws, turnover shots, and makes a good roller.
What does Overstable and Understable mean in disc golf?
Brief Description of Terms Stability is a description of the disc's flight path. Understable means a flight that turns right ( RHBH throw). Stable is a flight that doesn't turn. Overstable refers to a flight that turns left ( RHBH throw). Spike/Spike Hyzer is a shot that lands almost vertically and doesn't skip.
Disc golf roller shot | All you need to know - Best Disc Golfers
You are in the right place to explore all about the disc golf roller shot. Keep reading and be the master in disc golf roller shots.
How to master tomahawk disc golf throw? - Best Disc Golfers
Tomahawk disc golf throws are a great way to practice the technique of throwing discs with the right amount of force. This article will explore how to master the tomahawk disc golf throw, including what it is and how to do it, who should do it, why to do it, and precautions one should take when doing it.
What is the trickiest part of throwing a roller shot?
One of the trickiest aspects to throwing a roller is the inconsistency in the rolling portion of the shot. Many things, including sticks, rocks, foliage and the old lady walking her dog can all get in the way of your disc as it’s trying to roll.
How to release discs in golf?
For the flat release roller, you’ll want to reach back and release flat, or level to the ground at about chest height. Keep the nose down and remember to follow through level when you finish your shot. This will keep the disc from rising too high in the air.
What disc to use for cut roller?
The best discs to use for a cut roller is an overstable disc . The overstability of the disc makes it roll hard in the direction of the bottom of the disc when thrown correctly. You can find my list of the best overstable distance drivers right here.
What discs are best for max distance rollers?
The best discs to use for a max distance roller would be a neutral or stable disc . Stable discs tend to also be stable on the ground as they roll, which allows this disc to stay on edge longer than either an overstable or understable disc would. This results in more distance.
What is roller disc?
A roller is a shot thrown on an aggressive anhyzer release angle, which allows the disc to turn over and hit the ground while spinning at a high rate of speed. The spin carries the disc into a roll which takes the disc further down the course. A roller performed correctly and in the right conditions can drive for 10% – 15% more distance than ...
What is a cut roller?
Cut Roller. The cut roller is very similar to the max distance roller, you just need to adjust your anhyzer angle of release. You want a little bit less anhyzer than the max distance roller. This will put the disc on an angle to cut left rather than stand up and roll to finish right (when throwing RHBH).
What is cut roller disc golf?
A cut roller in disc golf is one of the more tricky types of rollers. This shot is thrown on a moderately heavy anhyzer angle of release with max power which allows the disc to fight the flex and turn over on it’s side.
When to use a roller in a disc game?
Ideally, you’ll want to use a roller when you have very low or no grass at all. Taller grass is obviously going to slow down the ground action when your disc starts to roll.
What to do before throwing a roller?
The first thing you want to do before throwing a roller is to get the right disc in your hand. Disc selection is key here. If you start with the wrong disc, you’ll likely end up frustrated with the results.
What happens when you put an understable disc on a golf ball?
When an understable golf disc is paired with an anhyzer release angle, the disc will really want to pull to the right. And hopefully pull enough to drop to the ground quickly. This is the typical way people throw rollers.
What is roller golf?
A roller is when an understable golf disc is thrown on an anhyzer release angle. The disc will turnover so much that it will make contact with the ground on its outer edge and continue to travel while rolling for the majority of its distance.
What is an understable disc?
An understable golf disc is one that will want to pull to the right, or turn over. Naturally, when a disc is thrown it will fight to move toward the direction it is spinning. A disc that flies counter to the direction it is spinning is known as understable.
How to get more distance in disc golf?
There is a little known secret for getting more distance in disc golf. The roller shot. Throwing a roller is highly technical compared to other disc golf throws, but there are a few tips and tricks I’ve learned to make this much easier and more effective. If you play disc golf often, this is a must know shot you need to learn.
What angle should a disc lands on the ground?
I’ve found the optimal landing angle for my rollers to be between 45 to 70 degrees.
Why is the disc released out of the hand at the same angle at which it will roll?
Moreover, because the disc is released out of the hand at the same angle at which it will roll, the whole shot can be made in an entirely straight line, which greatly improves precision and control. Lastly, the forehand roller requires much less of a run-up than a backhand shot.
Why use a forehand roller?
And because your release point is higher than it would be with a traditional drive, the forehand roller is an effective way to clear a hill directly in front of the tee pad. The wind is also an important factor to consider, although it is no more problematic for a roller than it would be for any other shot.
Which type of wind is the worst for rollers?
Crosswinds, and especially a right-to-left crosswind, present the worst conditions for a roller, because the flight plate is entirely exposed to the direction of the wind and it is likely to get pushed way off-course.
What grip do I use for a hyzer angle?
The V or split grip you use here is an excellent touch grip, because it allows fine sense of, and control of hyzer angle, but it has low power. All the top forehanding pros I am aware of use a two-finger grip, where the index is stacked on top of, or placed behind the forefinger, on the inside of the rim. see more. −.
What disc to use for distance rollers?
For distance rollers, you want a disc without a ton of glide and understable. In general, an understable disc is perfect for a distance roller shot because it has the highest turn rating compared to the others. You also need a disc that has a wide rim to ensure that the disc has a greater chance of rolling when hitting the ground.
What is cut roller disc golf?
For me, cut roller disc golf is one of the most challenging roller shots to execute where the player uses a heavy analyzer angle release and combined it with maximum power . The disc should be at a 20 to 30-degree angle when hitting the ground and will cut into the curved as it rolls while acquiring more speed. When done correctly, a cut roller will converge into a max distance roller which in turn increases the distance covered by the disc.
How to learn max distance roller shot?
Once you are familiarized with the easiest roller shot, it’s time to learn the max distance roller where the shot is much faster but with moderate altitude. In this shot, the player will throw the disc using a heavier analyzer release and a slightly higher altitude. The purpose is to have the disc fly in the air for a longer period to achieve lesser resistance. The longer that the discs spend rolling on the ground, the more resistance it has from obstacles such as grass, debris, and bumps to achieve a longer distance. With this roller shot, you need to aim for a more vertical landing to give the disc more time rolling at a quicker speed.
How much does a roller shot increase the distance thrown?
Based on my experience, if the roller shot is performed correctly and in the right conditions, the roller shot can increase up to 15% of the distance thrown.
Why do discs fly in the air?
The purpose is to have the disc fly in the air for a longer period to achieve lesser resistance. The longer that the discs spend rolling on the ground, the more resistance it has from obstacles such as grass, debris, and bumps to achieve a longer distance. With this roller shot, you need to aim for a more vertical landing to give ...
Which side should a forehand roller be on?
When throwing forehand, the best forehand roller disc should be on the overstable side because these discs will normally hold the flipping angle before going to the right. Midrange discs are also good for roller shots if you need a more controllable shot.
What is the best thing about disc golf?
The good thing about playing disc golf is you will be presented with situations that need to use your creative thinking and shot-making skills. In fact, in my experience playing the game, it’s not all about throwing the disc up in the air to get the farthest distance. There are game situations that a player needs to learn how to throw ...
