Finger tighten all lugs while wiggling tire so lug nuts center in holes Tighten in a criss-cross pattern (i.e.- 1 to 2; 3 to 4) 50 foot pounds of torque is ideal tightness
Full Answer
How to tighten wheel lug nuts?
Then when you are safe at home, it’s best to loosen the nuts and re-tighten them using a torque wrench. If you don’t have a reliable torque wrench, contact a professional mechanic, such as one from YourMechanic, to tighten your lug nuts for you. The most popular service booked by readers of this article is Tighten Wheel Lug Nuts.
What size are golf cart lug nuts?
The average hex size for a golf cart lug nut is 3/4 inch but again they can be bigger. The reason for this size is because of the thread of wheel studs. This size is the industry standard.
How to tighten drive belt on club car golf carts?
There is no scope for tightening or adjusting the drive belt in the Club Car golf carts. The only option you have is to replace the drive belt. You may come across suggestions like loosening the bolt and adjusting the belt and re-tightening the bolt.
How to align club car golf cart front end?
How to align Club Car golf cart front end? The best way of aligning the Club Car front end is to first adjust the placement of the camber, followed by the alignment of the wheel and tire, by toeing them in or out as per required. Position the straight and leveled edge of the camber on the ground.
What is the torque for golf cart lug nuts?
What torque should lug nuts be tightened to? The average torque for lug nuts on a golf cart is 50 Ft/Lbs. Loose lug nuts will cause the frame to bend and cause the aluminum casing to crack. Tightening should be done in a criss– cross pattern.
How do you properly tighten lug nuts?
0:141:03How to Use a Torque Wrench to Tighten Lug Nuts - YouTubeYouTubeStart of suggested clipEnd of suggested clipDon't just tighten the lug nuts in a circular pattern instead tighten in a star shaped pattern thatMoreDon't just tighten the lug nuts in a circular pattern instead tighten in a star shaped pattern that will give you even. Tightening.
How do you remove golf cart lug nuts?
0:031:44Removing Golf Cart Wheels & Tires (EZ Go, Club Car, Yamaha)YouTubeStart of suggested clipEnd of suggested clipBe sure to loosen the lug nuts slightly before lifting the cart. First you're going to take aMoreBe sure to loosen the lug nuts slightly before lifting the cart. First you're going to take a flathead screwdriver. And pry under this look to go ahead and remove the club car.
What size are the lug nuts on a Club Car golf cart?
1/2-20 Size16 Pack of Chrome Lug Nuts Standard 1/2-20 Size for Club Car & EZGO Golf Carts. Be the first to write a review.
What can I use if I don't have a torque wrench?
0:562:45How to torque without a torque wrench - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou could use a luggage scale if you wanted to but anything that's going to show you exactly howMoreYou could use a luggage scale if you wanted to but anything that's going to show you exactly how much force you're exerting.
Is it OK to hand tighten lug nuts?
Can you over-tighten your lug nuts by hand? Sure you can. If it's not just your car that's jacked up. If you have the necessary muscle, you could tighten the nuts more than the specifications call for.
How do you jack up a Club Car golf cart?
0:321:54How To Lift Your Golf Cart Onto Jack Stands | RZ Carts - YouTubeYouTubeStart of suggested clipEnd of suggested clipOnce you have the jack stand properly positioned underneath its a frame layout you're gonna go aheadMoreOnce you have the jack stand properly positioned underneath its a frame layout you're gonna go ahead and lower it slowly out of the jack stand making sure nothing shifts are at this process.
How do you change a tire on a Club Car golf cart?
0:291:53Replacing Golf Cart Tire - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd just make sure that you don't jack up your jack just yet you want the pressure on the tire soMoreAnd just make sure that you don't jack up your jack just yet you want the pressure on the tire so that you can remove the nuts without the tire moving we've removed the nuts.
Why do my tire lug nuts keep coming loose?
Over-tightening (excessive preload) can damage the bearing causing overheating, seal failure and lubricant loss. Where fasteners are to blame, several factors can cause nuts to work loose. Excess paint, rust, scale or dirt between mating areas of wheel end components will lead to low clamping force.
What size socket fits a golf cart lug nuts?
Deep Socket Lugs Standard 1/2"
What is the bolt pattern on a golf cart?
4x4The golf cart wheels sold on this site all have a bolt pattern of 4x4 (4 inches by 4 inches, or 101.6mm apart). This is standard on all golf carts (Yamaha, Club Car, EZGO, Par Car, STAR EV, Harley Davidson, etc.).
Do Yamaha golf carts use metric lug nuts?
16 Chrome Lug Nuts (Metric Threads 12mm-1.25, OD 3/4″) Fits ALL Yamaha Golf Carts ( Or any other cart with Metric Threads)
What is lug nuts?
Lug nuts, or wheel locks, hold the wheel onto the car. Missing lug nuts can cause the car to wobble so it's important to keep lug nuts tight. by John Hege on December 07, 2016. Part 1 of 1: Tightening wheel lug nuts. Next Step.
What to do if your wheel studs are damaged?
Check the studs, nuts, or the bolts for damage being sure that the threads are clean. If any of the threads are damaged you may need to get a wheel stud replaced or new bolts if that is what you have. Check also that the wheels are in good condition and that the surface where they bolt up to the hub is clean and flat.
How to take off wheels on a car?
Step 2: Jack up the car. If you are going to take the wheels off, put the car in Park and set the brake. Jack the car up and put it on jack stands. If you simply want to re-tighten the fasteners, that can be done one at a time on the ground. Step 3: Install the nuts by hand. Install the wheel lugs by hand.
Do you tighten lug nuts?
Tightening wheel locks or lug nuts seems like one of the simplest things you will ever do to your car. But as with most car components, there are subtleties involved and things you need to know to keep from doing damage to your car. Whether your car has wheel lug nuts or bolts, the fasteners must be properly cared for to prevent failure.
Can a tire store damage wheel fasteners?
Damage to wheel fasteners often occurs in tire stores, where inexperienced technicians are paid to move as many cars through in as little time as possible. In their haste, they might often damage the threads or over-tighten the lugs using powerful impact wrenches.
Can you use anti seize compound on lugs?
Most manufacturers do not recommend using any lubricant or anti seize compound on the lugs. Push the wheel home on the hub and using your socket wrench, tighten the wheel nuts just enough to hold the wheel snugly.
Can you tighten lugs with a short wrench?
A short wrench won’t give you enough mechanical advantage to over-tighten the lugs, so if you're away from your tools, tighten those nuts using the factory wrench with everything you've got. Then when you are safe at home, it’s best to loosen the nuts and re-tighten them using a torque wrench.
Why Is The Steering Loose On My Club Car Golf Cart?
The cause of loose steering on a Club Car golf cart is worn out tie rods, worn out bushes or loose kingpins.
How to adjust the steering on a Club Car Golf Cart?
Steering of the Club Car Golf cart needs adjustments like any other four-wheeler at some intervals. Sometimes the steering becomes tight and sometimes too loose to control the cart.
How to fix loose steering on a Club Car golf cart
The Club cart Golf cart’s steering gets loose at times and needs to be tightened and fixed. It happened to me many times, and I followed the systematic procedures to fix it.
How to tighten the steering on a Club Car Golf Cart?
One day I noticed that the Club Car Golf cart that I was driving needed the steering wheel to turn more clockwise than anticlockwise to keep it aligned with my driving directions. The reason was that my steering wheel had turned loose and needed tightening. I followed the simple process and solved the issue.
1988 Club Car DS loose steering
It is a common problem in old model carts. It is a 22 years model and owned by my friend. He brought the cart to me to fix the problem. I saw that the steering wheel was playing too much.
1992 Club Car DS loose steering
My 1992 Club Car DS steering loosened quite often. I used all tips and tricks like tightening the adjustment and locking nuts.
1994 Club Car DS loose steering
Fixing the 1994 Club Car DS loose steering wheel needs some mastery on the subject. My cart was having loose steering and searching the internet; I found that the problems can be overcome by regularly maintaining them.
How to loosen lug nuts on club car?
You must do this on all of the bushings to make the process easier later on. Jack up the Club Car from the back. Use a ¾-inch socket to loosen the lug nuts on the back tire.
How to align club car front end?
The best way of aligning the Club Car front end is to first adjust the placement of the camber, followed by the alignment of the wheel and tire, by toeing them in or out as per required .
What to do if camber does not budge?
If the camber still does not budge, redo the procedure on both joints and keep adjusting the position as required. After the front end of the driver’s side is completed, redo the whole procedure for the front tire on the passenger side of the Club Car.
Why does my golf cart wobble?
If the front-end of your golf cart wobbles while driving, it could be due to faulty and/or non-branded tires, incorrect tire alignment or a faulty engine. Faulty and/or non-branded tires. Incorrect alignment of the tires. Faulty engine.
How to use a 12mm wrench on a ball joint?
Unfasten the jam nuts on the ball joints using a 19 mm wrench. Use the 12mm wrench on each side of the tie rod and turn it outward to toe-out or inward to toe-in. Both sides must be turned the same number of times. Once done, retighten the jam nuts.
What causes a club car to crash?
Front Leaf Spring Bushings: Worn-out bushings in the front leaf spring can cause the Club Car to crash while in motion and could also cause camber and tire issues. Replacing all the above parts will fix the front end problems and also improve overall control, camber and tire of your Club Car.
How to fix a club car that is wobbling?
Steps to fix the wobble: Align the tires properly. Examine the height of the tires and ensure that the placement of both tires is even. Pull out the tires and clean them if there is any dirt jabbed in them. You must also consider inspecting the engine of your Club Car , along with the steering wheel.
How to reduce noise in golf cart?
You can reduce the noise in a Club Car considerably by opting for an engine with lower HP, insulating or lining the engine compartment, opting for mufflers or addressing mechanical problems like loose screws.
Why does my club car DS make a clunk?
The front-end clunking noise in a Club Car DS is due to worn out bushings under the spring and spindle, loose nuts on the spindle, a damaged rubber bumper or a cracked front leaf spring plate.
Why does my 2001 Club Car DS make a grinding noise?
The grinding noise in a 2001 Club Car DS is because of worn out brakes, a bad wheel bearing, low transaxle oil level in the rear end or a worn out input shaft bearing.
Why does my Club Car DS make a popping noise when turning the steering wheel?
The Club Car DS makes a popping noise when turning the steering wheel due to loose components in the front suspension, a cracked upper clevis, a worn out steering, missing bushings or lack of grease.
Why does my gas golf cart make a squealing noise?
The gas golf cart tends to make a squealing noise due to a loose or worn out starter/generator belt, a loose drive and/or alternator belt or a dusty clutch. Loose or worn out starter/generator belt. Loose drive and/or alternator belt. Dusty clutch.
Why does my club car make a rattling noise?
The rattling noise in a Club Car DS is often because of a worn out clutch, loose bolts, a rod knock, a loose top light, a dirty guide ring or a windshield problem.
Why does my clutch make a noise?
Clutch making noise (Club Car DS) The clutch in the Club Car DS makes a noise because of a worn out clutch, damaged clutch belt, shaft or buttons or low oil level in the rear end. Worn out clutch. Damaged clutch belt, shaft or buttons. Low oil level in the rear end.
How to remove golf cart clutch?
For removing the old one, follow these steps: Switch OFF the golf cart’s engine. Take a screwdriver and gently insert it between the belt’s bottom and the clutch’s groove. Slowly rotate the clutch and the belt will come off easily. If the belt is already loose, taking it out is very easy.
How to check if golf cart drive belt is too tight?
To check if the drive belt is too tight, follow these steps: Switch OFF the golf cart ’s engine. Reach to where the drive belt is located and use your fingers to press the drive belt between the two clutches. The belt must deflect at least one and a half inches under the pressure of your fingers.
How to tell if a 1997 club car has a slipping drive belt?
When a 1997 Club Car drive belt is slipping, first make sure that it is the drive belt that is at fault. You may have to remove the cover and watch the clutches in action while the cart is in motion to make sure that it is indeed the drive belt that is slipping.
How to remove drive belt?
Removing the drive belt involves holding the belt with both hands in the center between the driven and drive clutches and lifting the belt. You must now rotate the driven clutch counter-clockwise and slip the belt off the sheave. You can then slide the drive belt off the drive clutch.
Why is my club car drive belt so tight?
The reason for a Club Car drive belt being too tight can be because the drive belt is too small for the golf cart. The way to check if the belt is fitted correctly is to push the belt down with one finger at the center between the clutches. It should not deflect more than 1.5inches. It should not be less as well.
What is the primary function of a golf cart drive belt?
To primary function of a golf cart drive belt is to connect the primary clutch and the secondary clutch. The primary clutch drives the cart and the belt helps it to rotate the secondary clutch (they are referred to as the drive clutch and the driven clutch respectively). The drive belt, unlike some of the other automotive belts, are very thick.
Why does my golf cart drive belt slip?
The reason for the drive belt slipping could be that it is of a larger/longer size and therefore loose. You may start feeling the slippage after driving for a while. This is because the belt gets heated up after the golf cart runs for some time and loosens further .
What parts do you need for a golf cart?
Some of the crucial parts you are going to need to include longer shocks, springs, axles, and A-arms. A support plate may also be necessary, at least for most golf carts. The support plate goes directly to the golf cart and attaches your custom lift kit to the wheels.
What is a block lift kit?
Block Lift Kits enhance the appearance and height of your golf cart. The system is usually a spacer between the frame and suspension, with the flexibility and functionality to boot.
What do you need to lift a Yamaha golf cart?
Some of the tools and equipment that you require include a floor jack, wheel chocks, jack stands, small pry tool, and needle-nose pliers.
What to do if you have trouble with your cart axles?
If you’re having trouble with the axles, let a professional do it for you. There is no harm in asking for help, and it goes a long way into ensuring your safety and durability of your cart. You can move on to the A-arms if you’re comfortable with this step.
What was the golf cart meant for?
In the not so far away past, golf carts were meant for the greens. You get the idea; flat surfaces with extremely short grass. However, the golf carts have moved past the golf courses into residential communities, beaches, backcountry areas, retirement communities, educational institutions, and hospitals, among others.
Can you lift a golf cart without a kit?
Lifting a golf cart keeps you ahead of the game in terms of versatility. Typically, it is possible to raise your golf cart without a kit. The advantage is that it saves you money spent on kit purchases and professional installation.
Can you buy a lift kit for a golf cart?
A simple mistake will take you back several hundred or even thousand dollars. If that happens , well, then it would have been better to purchase a lift kit for your golf cart. But on the bright side, a homemade lift kit for a golf cart is the most rewarding.