Moving all the way to the right (clockwise) will make the shock stiff. On some single-adjustable shocks, the adjustment sequence goes like this: Begin the shock adjustment process by turning the adjustment knob fully counter clockwise until it reaches the 1/9 setting on the indicator.
Full Answer
Should you remove the rear shocks from a golf cart?
If the cart has three or more heavy-duty rear springs, you can opt to remove the rear shocks as they don’t have any use if you don’t have much weight at the back of the cart. Check the pressure on all tires and release some pressure if you find that it’s too high as this can cause bumpy rides.
What kind of springs are in a golf cart suspension?
Suspension springs can come in a couple of different forms. The two most common golf cart springs are the coil springs and leaf springs. Golf car coil springs (Figure 1) are not generally found by themselves but are often combined with a shock absorber. It is possible that the springs found over the shocks can break or even wear out.
How do I know if my golf car shocks are bad?
If the golf car feels like the front end is “nose diving”, it is likely that your shocks are bad. The same can be tested for the rear shocks by putting the golf car in reverse and stopping abruptly.
How do I adjust my front shocks?
This is done using the threaded collar or snail cam on your shocks. First, if your shocks have a threaded collar, check your owner’s manual for the typical that you want to stay within when adjusting. Unless you want your front to be lower than your rear for some reason, you should try to keep the adjustments the same in all four corners.
How do you put rear shocks on a golf cart?
0:091:20How to Install E-Z-GO Rear Shock Absorbers - YouTubeYouTubeStart of suggested clipEnd of suggested clipPull the top nut with a wrench inside of the frame. While twisting the bottom of the strut. And theMorePull the top nut with a wrench inside of the frame. While twisting the bottom of the strut. And the counterclockwise mission to install new bushings and washers to the strut. And reinstall.
Why does my golf cart ride so rough?
Your golf cart ride can be rough because of tire problems, suspension problems or issues with the transmission. Tire Problem: Incorrect air pressure and wrongly aligned tires are two key tire-related problems that can trigger rough golf cart rides.
Why is my golf cart jumpy?
Jerking Electric Golf Cart When Starting That's because most “jerking” concerns are caused by battery issues or a poor flow of electricity from the battery to the cart. Typically, you'll start to notice this problem when your cart needs to charge up.
Why will my golf cart go backwards but not forward?
Check the Forward/Reverse switch of your golf cart for loose connections. If the connections are intact, interchange the top and bottom wires at the rear. If the cart now goes in reverse but not forward, the problem is with the switch. You have to just change the switch in this case.
How can I make my golf cart more stable?
Drop Spindle kits are used to replace and increase the golf cart spindle size and length. This can give your golf cart a wider stance, and increase the stability. The wider stance is perfect for those looking to fit those big off-set wheels on your cart, which in turn, can allow you to add wider and taller tires.
How can I make my golf cart ride smoother?
How to Make a Golf Cart Ride SmootherCorrect Tire Pressure. ... Replace Worn Out Shocks and Struts. ... Check the Fluid and Filter. ... Replace the Clutch. ... Flat Spot in Tire. ... Tire Damaged or Out of Line. ... Worn Out Suspension Bushings. ... Check Your Lift/Tire Combo.More items...
How do you stop a golf cart from bouncing?
You can easily take care of this problem by deflating your front tires until the sidewalls of your cart are about 1/2 the front walls. This should help get the beads seated. Now, you can inflate your tires back. The bounce should have disappeared.
Why does my golf cart surge?
A golf cart can be surging due to insufficient fuel levels, damaged motor brushes or a vacuum leak. The brushes in the motor are damaged or worn out. The MCOR is malfunctioning or a mismatch between the motor and controller results in torque bumps.
What makes a golf cart shake?
The golf cart shake issues arise due to damages in steering, damaged rotor, vibration and pedal pulsation or incorrect tire balance. To fix this issue, you have to locate the yellow wire attached to the golf cart's solenoid.
How do you make a golf cart go forward?
0:5911:38Golf Cart Forward Reverse Switch - YouTubeYouTubeStart of suggested clipEnd of suggested clipMost likely that your forward reverse switch. Which is located right there. This is what makes yourMoreMost likely that your forward reverse switch. Which is located right there. This is what makes your golf cart go forward or reverse.
Why won't my ezgo golf cart go forward or reverse?
Electrical Issues For example, if your run/tow switch has malfunctioned, your cart won't go forward or backward. This switch is designed to change your cart's operating mode from normal operation to increased power for towing. Check the switch to make sure that it isn't “stuck” between the two modes.
How do I fix the reverse on my EZ Go golf cart?
Steps to Fix Reverse Not Working on EzyGo Golf Cart: Use an ohmmeter to check the micro switches as you move them in forward and reverse position. If the switches are working perfectly, put them in back in place. Otherwise, get the defective ones replaced. Now, try interchanging the black and white wires.
Why do golf carts shake?
The common cause of golf cart vibrates when accelerating due to damaged inner CV joints, broken motor mounts, unbalanced tires or a bent driveshaft. To fix this issue, you should check the CV joints of your golf cart. Check the driveshaft, whether this is in good condition or not. The CV joints should be well greased.
When should I replace my golf cart shocks?
If you're noticing that your ride is more bumpy than usual or your golf cart just doesn't handle the way it used to, it may be time to replace your shock absorbers.
What is the correct tire pressure for a golf cart?
15 to 25 pounds per square inchThese tires typically use anywhere from 15 to 25 pounds per square inch (PSI), with the average being 20 to 22 PSI. For golf carts driven off-road or on rougher terrain, it's not uncommon to under-inflate tires to gain additional traction. However, under-inflated tires wear down prematurely.
Do golf carts have shock absorbers?
Golf Carts utilize shock absorbers and/or leaf springs to soften ride quality over the bumps of rough terrain. Heavy duty golf cart shocks (or leaf springs) are recommended if you experience suspension sagging that is causing your wheels and tires to rub in your wheel wells.
Strut is leaking oil or shows physical damage
Most of the time if a strut is going bad it is because a seal holding the fluid (usually oil) in the shock starts to get old and starts to let the oil escape. This can often be discovered by a simple inspection of the shock. If it appears to be oily, wet or caked with dust and dirt, it is likely that the shock is leaking and needs to be replaced.
Golf cart is experiencing excessive body roll
Excessive body rolling is another indication of a strut going bad. This test can be performed by driving the golf car then turning the steering wheel so that the golf cart is tracing out an “S” pattern.
Bonus tip
If none of these tests or inspections reveal that your shock is bad, you may want to inspect the shock bushings. These are the rubber or plastic bushings at the ends of the shocks and also found where the leaf springs are bolted to the spring plates or brackets.
Why do golf cart wheels wear out?
The golf cart’s wheels get wearied away over time due to regular rides over rough terrain, potholes and other uneven ground, to fix which , camber needs to be adjusted.
What size arm lift kit for Yamaha golf cart?
One can opt for a 6’ double A arm to avoid such a problem. A rollover or crashing golf cart: A six inch A arm lift kit that suits the Yamaha Drive model can cause reduced control over your golf cart if you don’t adjust the camber of its front wheels properly.
What does a Camber do on a golf cart?
The camber is the angle of the wheels of a golf cart The camber is extremely important for maintaining the balance of the tyres on a golf cart . Golf cart owners need a good camber adjustment to ensure a smooth jerk-free ride.
Why is my Yamaha G-16 camber displaced?
Highly displaced camber: This normally happens if your cart is too old and the control arm bushings of your spindle lift kit are heavily worn out. The best bet is to replace the bushings with new ones or simply switch to 6” double A arm lift kit. You can also adjust the toe to fix camber problems that might arise. This happens with the Yamaha G-16.
Why is my Yamaha G9 camber bad?
Worn out or incorrect struts are a key cause of camber problems in a Yamaha G9 golf cart. Often, this, combined with excessive positive camber can wear away your tires very easily. The positive camber can be a result of worn out shocks.
How to adjust toe in and out?
Don’t forget to adjust the toe in or toe out. You can do that by loosening the tie rod and twisting it left or right depending on whether you want to toe the car in or out.
How to jack up a car with a heim joint?
Use the parking brakes to jack up your car. Then loosen the lower heim joint by loosening the nut of the lower control arm. You must adjust the nuts to bring them closer to or farther from the frame of the car if the camber is out or in respectively. Lower the car and check the camber. Repeat the steps if needed.
What Do Clickers Do?
When it comes to actually adjusting your ATV shocks, there are a few tools at your disposal that are built into many shocks. The most prominent one is the clicker. This is the little knob, nut, or set screw that’s built into the top of the shock.
How does a clicker affect oil?
Clickers affect the flow rate of the oil through the valve inside the shock. When you adjust the clicker, you’re adjusting your shock’s compression (more on that in a bit). They adjust in small increments and make an audible click when you turn them, hence “clicker.”.
How to tell if your clicker is too soft?
You need to pay close attention to how it feels. If you feel like you’re rolling forward and backward or left and right while you ride, that indicates that your low speed clicker is set too soft. If every single bump and rock makes your teeth chatter, then the clicker is set too stiff.
What are shocks made of?
Shocks are made up of two key parts: 1 Springs 2 Shock absorbers or dampeners
What is compression shock?
Compression, as the name suggests , has to do with how your shock compresses when you hit a bump or land a jump. This is different than rebound, which refers to the way your shocks act after they’re compressed.
How do shock absorbers work?
That’s where shock absorbers come in. They’re the center part of your shock and consist of an oil-filled tube with a piston inside. There are valves in the tube that control how fast or slow the oil can move through the piston. The result is that it stops your spring and ATV from wobbling all over the place like a bobble head every time you hit a bump. Instead, it causes your springs to compress and decompress in a controlled way.
What is the perfect position on a shock?
The perfect position lets your shock rebound quickly without overshooting the equilibrium so that your suspension doesn’t bounce up and down before it settles .
How to adjust brakes on a golf cart?
Here are the steps in adjusting the brakes: Turn off the power of the golf cart. Don’t set its parking brake. Put the brick or blocks in front and behind each of the front wheel of the golf cart to prevent it from rolling. Get the floor jack into position at the rear of the golf cart.
How to remove bricks from golf cart wheels?
Release the floor jack so that the golf cart wheels will again touch the floor. And then remove the bricks of blocks from the wheels in front.
What is optimal tire pressure for my golf cart?
Optimal tire pressure for your golf cart will vary by make and model. You can find the recommended tire pressure (known as PSI ) by looking on the tire’s sidewall.
Can you fix a flat on a golf cart?
Yes, absolutely ! It is a good idea to keep a can of tire repair sealant in your cart so that you’re prepared in case of emergency. The best thing to do once you get a flat is to use something like “Fix-a-flat” and then take the tire in to a local tire store or autobody to see if it can be repaired.
What kind of tire is best for my cart?
There are many, many golf cart tire brands but some of the most reputable brands include Kenda, Deestone, Nanco Tires, Carlisle Tires and Greenball Tires . That being said, when it comes to golf cart tires, it is less about brand and more about the tread! There are three main kinds of treads: all-terrain, off road/knobby, and turf/street. Let’s break down the treads:
When my cart needs a replacement, should I buy new or used?
While you likely can get some very gently used golf cart tires, its always best to buy new. Many people think that because you put less miles on a golf cart, that used are a better option. However, many new tires come with a warranty, and for the best performance and longevity of your tires, buying new is going to be your best bet.
Why is it important to adjust the distance of travel on a golf cart?
It is important to adjust this distance of travel to make sure that the brakes are working properly. If there is too much travel distance, the braking capacity or power of the golf cart will be reduced. But if the distance is too short, the brakes may not release fully. So adjustments are necessary in both cases.
Why does my EZGO RXV ride rough?
Why an EZGO RXV rides rough. Your EZGO RXV often tends to ride rough because of the following reasons. Too much air in the tires. If the golf cart tires have too much air and uneven pressure, the rides may be rough. You can consider checking this out and releasing the excess air or pressure.
How to make a golf cart ride smooth?
You can make your golf cart ride smooth by checking for the above-mentioned problems in the cart and attending to them. Correct tire pressure. Check if the front and back tires have the correct and even pressure according to specifications. They may need different pressures based on the conditions and seasons.
Why is my golf cart so rough?
Your golf cart ride can be rough because of tire problems, suspension problems or issues with the transmission. Tire Problem. Suspension Problem. Transmission Problem. Tire Problem: Incorrect air pressure and wrongly aligned tires are two key tire-related problems that can trigger rough golf cart rides.
How much pressure should I put on my golf cart tires?
Check the pressure of all the tires in the cart. If it’s above 30 PSI, you might want to release some pressure so that it’s in the range of 20 to 22 PSI per tire. On a golf course, 8 to 10 PSI is more than enough. You can also check out with a tire shop to get the tires balanced.
How to get smoother ride on Yamaha G16?
You can get a smooth ride from your Yamaha G16 golf cart by ensuring the following. Ensure that there is no air leak in the gaskets between the intake and the carburetor as well as the spacer. You can pull out the airbox and check for a damaged gasket or spacer.
What causes a golf cart to bounce?
Check if your golf cart is fitted with heavy-duty leaves. These are often known to cause bounce. Replacing them with stock leaves or removing a couple of them should solve the problem.
Why is my car bumpy?
Check the pressure on all tires and release some pressure if you find that it’s too high as this can cause bumpy rides.
