how to troubleshoot golf cart key switch

Using a Screwdriver Method

1. Take a screwdriver and insert the point into the switch’s slot.
2. You should be able to turn the screwdriver in the same way you would turn a key by gently but firmly moving it up and...
3. This should get the cart rolling. The screwdriver method may not work if the golf cart has an anti-theft feature in...

Full Answer

How to fix a golf cart key switch that won’t start?

Replace the golf cart key switch after replacing the key switch ignition wire as a last step. This will ensure that you replace the higher-priced part last while troubleshooting your golf cart key switch. After replacing the switch, your cart will start.

How do you troubleshoot a golf cart?

A common area for golf cart owners to troubleshoot is the golf cart key switch. By troubleshooting, identifying and repairing the switch yourself. you can save money on a mechanic. Confirm that your golf cart transmission selector switch is set fully to the forward, reverse or park direction, depending on your model of golf cart.

Can you replace the ignition switch on a Club Car CART?

Although the basic working and mechanism of most of the carts are the same, there still are minor differences in the internal workings. So, if you are looking to replace the ignition switch of a Club Car golf cart, the steps that you followed for the E-Z-GO may not help.

How to start a golf cart with a bad ignition?

Find the ignition wire on your golf cart. This runs from your ignition switch to the starter solenoid. Check this over for corrosion on either end and make sure you’ve got a tight connection. If the connections use a spade lug, pull the connection loose, wipe off the terminal, and plug it back in again. Try to start the cart now.

How do you test a golf cart key switch?

Testing a Club Car Ignition SwitchFind the back and red wires on the back of your battery pack.Connect the black wire to the negative terminal and the red to the positive.Keep the cart turned off while you work on it.Check the wires with a probe meter while the cart is off – only one wire should have a charge.More items...

How do you bypass a golf cart key switch?

This process includes these steps:Turn off the ignition switch to minimize your risk of electrocution. ... Locate the wires for your cart's ignition switch. ... Use wire snips to cut these wires away from their connectors. ... Touch the engines together carefully to bypass the ignition switch and send power to your engine.More items...

How do you test an ignition switch?

2:183:51How to diagnose a No Start Condition - Ignition Switch - YouTubeYouTubeStart of suggested clipEnd of suggested clipLet's go ahead and check as simple as it may sound your problem can be just as simple as a worn outMoreLet's go ahead and check as simple as it may sound your problem can be just as simple as a worn out key or some keys actually have anti-theft. Built into them which could be bad.

How do I reset my Club Car golf cart remote?

Easily Reset the Club Car Golf Cart OBCKey switch to off.Set forward/reverse to neutral.Put tow/run switch to tow.Disconnect the negative battery terminal from the battery pack.Put the tow/run switch to run.Put forward/reverse switch to reverse.Put key switch to on.More items...

Can you bypass a micro switch on a golf cart?

You can bypass the reed switch in an EZGO golf cart by connecting the red wire of the reed switch to the white wire from the charger receptacles and to the red wire from the FRN micro switch.

How do you start a gas golf cart without a key?

Quick Screwdriver Method:Insert the tip of your screwdriver in the ignition switch's slot.Move the screwdriver up and down gently but firmly until you can turn the tool around the same way you would turn a key.This should fire up the cart. ... Another method would be hot-wiring which involves working the wires.

How do I know if my ignition switch is faulty?

Symptoms of a Bad Ignition SwitchEngine Won't Start. ... Vehicle Starts and Suddenly Stalls. ... Intermittent Loss of Lighting and Other Accessories. ... Silent Starter Motor. ... Difficulty Turning the Key. ... Lock/Off. ... Accessory. ... Run.More items...•

What are the symptoms of a faulty ignition switch?

5 Telltale Signs of Ignition Switch ProblemsYour car stalls while driving. One of the first signs is a vehicle that suddenly stalls while the engine is operating. ... Car starts and then suddenly stalls. ... The engine doesn't start. ... Issues powering on the accessories. ... Issues turning or removing the key.

When I turn the key in my ignition nothing happens?

If you turn the ignition on and no lights come on on the instrument panel, it means that there is no power coming from the battery. It could be a dead battery, loose battery terminal or something like a bad ignition switch or blown main fuse.

How do you troubleshoot a Club Car controller?

Here are a few quick troubleshooting tips.Make sure it isn't your batteries! ... If your batteries are fully charged and your vehicle won't run, when you press on the accelerator pedal, then you should hear a clicking sound which will indicate the solenoid is engaging and allowing power to flow to your controller.More items...

Where is the reset button on an electric Club Car golf cart?

Identify your main battery supply (usually the largest battery) on your motor. Check around this supply for a small red button that may or may not be labeled “Reset”. Press and hold this button for a few moments and then release it to reset the motor.

Where is the reset button on electric golf cart?

Locate the motor Remove the panel so the electric motor is visible. Electric motors usually include reset buttons that can perform similar to circuit breakers. Look in the area where several electrical wires enter the motor and locate a small red button. This is the reset button.

How do you hotwire a EZ Go golf cart?

InstructionsEnsure that power to the cart is turned on.Locate the two wires connected to the cart's ignition. ... Cut the wires and strip the ends.Touch the ends of the wires together to force the engine to turn over without turning the ignition.Secure the wires together with electrical tape.

Do all golf carts use the same key?

A key will not work on all golf carts. Instead, they are limited to the vehicles manufactured by that company. For example, if you lost the keys to your E-Z-Go TXT Elite, you would not be able to use a Clubcar cart key. Therefore, in most cases, golf cart keys are universal relative to the manufacturer.

Can you make a copy of a golf cart key?

Can You Get a Copy of a Golf Cart Key Made? Yes, you can easily get a copy of a golf cart key made by a golf cart manufacturer, retailer, or locksmith. But these have some challenges. Duplication of the key will become an effortless process if you have an original key, as it helps in copying.

Is it easy to steal a golf cart?

If a person with poor intentions gets ahold of an E-Z-GO master key, there will be lots of golf carts they can steal with very little effort. If you don't have a GPS installed on your cart, then you will potentially never see it again. The good news is that you can change your key on your golf cart to a unique key.

How to check if key switch is working?

If you wish to check if the key switch is functioning properly, follow these steps. There are two probe wires present in the battery pack – a black and a red. Connect the black probe wire to the 36v negative terminal of the battery pack. The red probe wire should be connected to the back of the battery pack.

What to do if you can't wire a key switch?

If you are unable to wire it correctly, it may be a good idea to consult a key smith to get the key switch changed.

How to make a shopping cart start when the key is in ON position?

One of the solutions to this issue would be to use a toggle switch. Try wiring it in such a way that the cart would start only if the key is in ON position while the switch is in the OFF position. And by default, keep the switch in ON position. This way the cart will not work unless a person knows this particular arrangement.

What wires are used for toggle switch?

This is the connection from the battery. Usually, it is a red/ white wire which will be used for this purpose. This will need to be connected to the solenoid, V/R field, ignitor amidst others.

How to remove ignition switch?

Remove the face nuts with a pair of pliers. Now, the ignition switch can be removed easily.

Can you replace the ignition switch on a club car golf cart?

So, if you are looking to replace the ignition switch of a Club Car golf cart, the steps that you followed for the E-Z-GO may not help. A few minor modifications may have to be made.

Do all golf cart keys have the same key?

Yes, all club car golf cart keys are the same. The downside of owning a golf cart is that the key switch can be easily accessed using any key from the same manufacturer. If you have a single key from a particular manufacturer, you can easily use it to open all the carts made by them.

What is a direction switch on a golf cart?

The direction switch or forward/reverse switch controls whether the golf cart moves forward or backward. This switch is one of the most used parts in a golf cart, which means it will be subject to wear and tear. You'll find what the issue is if the switch is acting up. There is a big chance that it will need to be replaced. Again, it's best to choose a mechanic for repair.

Why won't my golf cart start?

Like any other electric vehicle, the batteries are mainly at the root of why your cart won't start. After all, they are the primary source of power for your electric golf cart. If your cart is not working, this is the first place to check. Generally, lead acid-based batteries are used for electric golf carts, and you must recharge them regularly so that they function correctly.

What to do if your solenoid is bad?

Make sure to inspect it properly. If you find a damaged solenoid, the best thing is to take your cart to a garage. A mechanic can solve the issue and replace the solenoid if required.

Why are my ignition switches loose?

There might be issues with the wiring of the ignition switch. Due to wear and tear, wires may become loose and require replacement.

Can you fix a golf cart speed controller?

If you face issues with the speed controller, do not try to fix it yourself unless you can easily find and tighten the connection. It's best to take it to a specialist to diagnose the problem correctly.

Is an electric golf cart invincible?

Electric golf carts are convenient, durable, and efficient, but that doesn't make them invincible. Therefore, it is essential to understand that issues can arise in an electric golf cart. Do not panic if your golf cart doesn't start— chances are, it's going to be one of the following five most common reasons.

How to inspect a golf cart motor?

Located under a panel at the back of your golf cart will be the electric motor. The panel will be held in place by four or six screws. Use your screwdriver to remove these, turning them counterclockwise.

What are the problems with electric golf carts?

Electric golf carts have two areas where problems usually occur, the batteries and the motor. Before you spend a lot of time and money waiting on a repairman or taking your electric golf cart to the shop, take a few seconds to troubleshoot the cart on your own.

How to charge a golf cart?

Step 1. Test the wall socket where you charge your cart. Every golf cart has a built-in charger that connects to a wall socket. Take your wall socket 120-volt tester and check the actual socket that you use to charge the cart itself. Plug in your 120-volt tester and make sure the actual wall socket is good. If there is no voltage reading, your ...

What to do if your socket is not reading voltage?

If there is no voltage reading, your socket is bad and either needs to be replaced or the circuit breaker needs to be reset. You can reset the circuit breaker by flipping all the switches in your breaker box. An electrician should replace the socket.

Where is the electric motor on a golf cart?

Located under a panel at the back of your golf cart will be the electric motor. The panel will be held in place by four or six screws. Use your screwdriver to remove these, turning them counterclockwise.

Where are the batteries in a car charger?

If you are getting power to the charger, it's time to check the batteries. Most batteries are located under the seat, which flips up for access. Grab a hold of the back of your seat and flip it up to expose the batteries. There will be a row of batteries. Each one of these need to be checked.