Golf-FAQ.com

how to use the golf smith loft and lie machine

by Mr. Kade Walker Published 3 years ago Updated 2 years ago
image

Part of a video titled The Golfsmith Professional Loft/Lie Bending Machine - YouTube
0:01
1:17
The widest range of adjustment. Possible the clear easy-to-read. Side by side loft and lieMoreThe widest range of adjustment. Possible the clear easy-to-read. Side by side loft and lie indicators. Give accurate readings every time.

What makes a good loft/lie machine?

The most important aspect of any loft/lie machine is its ability to lock every club into the same, uniform position. Consistency provides clubfitters with accurate readings and maintains the integrity of the club as it’s being bent.

What tools are used to adjust the loft of a club?

Bending Bars The fitter uses this pulley to adjust the loft of the club. 1. T-Handle 2. Toe Stop 3. Sole Rest 4. Lie Angle Gauge 5. Loft Angle Scale 6. Bending Bars James Colgan is an assistant editor at GOLF, contributing stories for the website and magazine on a broad range of topics.

How does a golf club fitter work?

Once a club has been affixed to the machine, the shaft rests against the vertical plate, which provides the fitter with a measurement of the club’s lie angle. From here, the fitter can adjust the club in either direction until the desired angle is reached.

How do you measure lie angle on a fitter?

Lie Angle Gauge Once a club has been affixed to the machine, the shaft rests against the vertical plate, which provides the fitter with a measurement of the club’s lie angle. From here, the fitter can adjust the club in either direction until the desired angle is reached.

image

How do you use a loft and lie machine?

0:483:43How to Use a Loft and Lie Machine Part 2 - YouTubeYouTubeStart of suggested clipEnd of suggested clipI want to line my bar up perfectly parallel with the shaft or in line with the shaft. And i usuallyMoreI want to line my bar up perfectly parallel with the shaft or in line with the shaft. And i usually use a reference point to the front of the machine. So i'm parallel to that.

How do you read a loft lie machine?

0:331:41SIGNATURE ANGLE MACHINE | Finding loft and lie - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd pivoting is the hosel is always going to be in a vertical position regardless of the loft of theMoreAnd pivoting is the hosel is always going to be in a vertical position regardless of the loft of the iron sixty degree wedge will be in this same bending position as a three iron.

How do you adjust the lie angle on a loft?

2:275:34How To Adjust Loft & Lie - Golf Club Making Tips - YouTubeYouTubeStart of suggested clipEnd of suggested clipTo increase the loft. Apply pressure downward. By applying pressure towards the back of the iron orMoreTo increase the loft. Apply pressure downward. By applying pressure towards the back of the iron or upward the loft will be decreased.

How do you bend a loft and lie?

0:563:18How to bend your clubs | Mitchell Golf - YouTubeYouTubeStart of suggested clipEnd of suggested clipStraight with the shaft. And and Bend. And align with the front of the machine either up to go moreMoreStraight with the shaft. And and Bend. And align with the front of the machine either up to go more upright or pull down to go more flat every wanted to add loft.

How do you find the lie angle?

4:3911:13HOW TO CHECK LIE ANGLES ANYWHERE - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd see where that line is pointing if it starts to lean a little bit like this what that basicallyMoreAnd see where that line is pointing if it starts to lean a little bit like this what that basically means is the club came into the ball to upright and we need to flatten it.

How do you adjust a lie putter?

0:3910:56How to Bend loft and Lie on a Putter 2019 - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou know typically want the sole flatten down on the ground. You don't want it too much in the areaMoreYou know typically want the sole flatten down on the ground. You don't want it too much in the area to want to too much toe down you want the right amount of loft based on how you putt.

Does 1 degree lie angle make difference?

Yes it will make a difference, I play 2 degree upright and +1/2. If your hitting the ball left all the while (I am guessing your right handed) won't be to do with having the lye angle to flat.

Does adjusting loft affect lie angle?

As you change the loft and the face angle, you will also change the lie unless there is a separate setting to alter the lie independently of loft. Loft changes the ball flight vertically and lie changes the ball flight horizontally.

What does increasing lie angle do?

If your lie angle is too flat, you will tend to slice the ball. If your lie angle is too upright, then you will tend to hook the ball. It can even cause you to develop swing compensations to correct for it, preventing you from ever developing a consistent, repeatable, and powerful swing.

What is the T handle on a golf club?

1. T-Handle. The T-handle is a rotating crank that works in conjunction with the toe stop (2) and sole rest (3) to lock the club into the proper position.

Where is the toe stop on a golf club?

The toe stop screws in on the toe side of the club and locks it into the proper position. The toe stop can be positioned on either side of the machine in accordance with a left- or right-handed club.

blazman11

I’ve recently acquired a Golfsmith Professional Loft/Lie machine. Problem is I have no idea how to use it.

Clafoone

The large brass "nut" is a toe stop, you should be able to unbolt it and secure it to the other side of the machine. this will enable you to adjust left hand irons.

Socrates

You really should learn how to use Google before you learn to use the lie loft machine.

Nessism

Your unit is an older version but it functions same as the type in the video.

blazman11

I’ll try again when I get home tonight with just moving the toe stop to the other side. When I tried before I couldn’t get a LH club to sit properly as the dual horizontal bars were interfering with the placement. But I didn’t try too long and instead began investigating a potential move of the base.

Nessism

You may have to move the measuring attachment as well as the toe stop. Sounds like you are close to figuring it out.

jvincent

I'll try again when I get home tonight with just moving the toe stop to the other side. When I tried before I couldn't get a LH club to sit properly as the dual horizontal bars were interfering with the placement. But I didn't try too long and instead began investigating a potential move of the base.

image
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9