Golf Club Length 101: Chart to Determine Your Ideal Length
| Club Type | Avg. Length | Club Type | Avg. Length |
| Driver | 45” | Sand Wedge | 46” |
| Putter | 44” | Gap Wedge | 45.5” |
| 1 Iron | 39.5” | 3 Wood | 43” |
| 2 Iron | 39” | 4 Wood | 42.5” |
Should all my golf clubs be the same length?
Some sets are made with all clubs the same length as the eight or six iron, but the seven iron is the most popular. You will still need to make sure you get your clubs fitted adequately for you; in fact, it is more important with the one length than with variable length. There are lots of reasons to switch to a one-length iron.
What is the standard length of a golf club?
What Is the Standard Length of a Golf Club?
- Rules of Golf. The rules regarding golf club construction are found in Appendix II of the Rules of Golf, published by the United States Golf Association.
- Graphite Vs. Steel. ...
- Drivers. In a 2010 “Golf Digest” article, PGA Tour player Bubba Watson said the typical off-the-rack driver is 45.5 inches long.
- Irons and Hybrids. ...
What length golf clubs do you need?
- 3-wood
- 4- and 5-hybrids
- 6- to 9-irons
- Pitching wedge
- Sand wedge
- Driver
- Putter
How to measure the length of a golf club?
- Use a ruler-Some people use tape measures to measure the length, but the best item to use is an aluminum ruler. ...
- Stand the golf club at the address-The best way to measure your golf club is by standing it at address. ...
- Place the straight edge of the shaft enabling the corer to touch the ground. ...
How do you measure club length at home?
0:582:42Measuring Golf Club Length Video Blog From Hireko Golf Part 1YouTubeStart of suggested clipEnd of suggested clipThe club needs be positioned. With the center of the sole touching the ground in your ruler. Back byMoreThe club needs be positioned. With the center of the sole touching the ground in your ruler. Back by the heel touching the ground. This is the correct way to measure. If the club is too upright.
Does golf club length include the head?
Measuring different types of golf clubs requires an understanding of what we are actually measuring. In today's terminology, the “length” of a golf club is not the length of the shaft, but the length of the shaft and the club-head combined.
How long should my golf clubs be?
For example, for a golfer that stands 6'2” and has a wrist-to-floor of 39”, the recommendation for proper club length would be 1/2” longer than standard length.
What is the standard length of a 7 iron?
What is the Standard Length of a 7 Iron? The standard length of a 7 iron is 37 inches on steel and 37.5 inches with the structure made of graphite. For women, the standard length of a graphite golf club is 36.5 inches, and for steel, it is 36 inches. The standard lengths are set from the shaft weights of the golf club.
How do you know if your golf clubs are too short?
6 Signs Your Golf Clubs are Too ShortYou need to bend too much at the waist before swinging.You also have to bend your knees pre-swing.You keep hitting the ball with the golf club's heel.The swing path is in to out.The tempo is too quick.The ball tends to veer off to the right.
How do I know if my golf clubs are too long?
Here's how to tell if your golf clubs are too long:Completely upright posture.Improper golf swing.Odd ball flight.Feels cumbersome and unmanageable.Shaft feels weak.Consistency hitting with the toe.The measurements are wrong.
What is standard length for golf irons?
The standard length of a steel 9 iron is 35.5 inches. For female golfers, the average length is 34.5 inches. With graphite shaft, the standard length for men is 34.35 inches and for women, it is 33.75 inches. A 9 iron club is categorized as a short iron golf club.
What is the standard length of an 8 iron?
What is the standard length of an 8 iron? The standard club length of an 8- iron is between 35.5” to 37”.
How to measure golf club length?
Important Information before we know “How to Measure the Golf Club Length.” 1 The standard irons designed for women are usually an inch shorter than the standard irons designed for men. 2 The United States Golf Agency (USGA) limits the maximum length of golf clubs. 3 The minimum length for all the golf clubs, including putters, is 18 inches. 4 The maximum length for all golf clubs except the putters is 48 inches. 5 The putters do not have the maximum length limit. 6 The shaft length has everything to do with the length of the golf clubs. The longer shaft does mean longer golf club length. 7 A golfer uses woods, hybrids, and irons for different types of shots. It is the reason why their golf club is mostly empowered with a mix of these three.
What is the minimum length of a golf club?
The minimum length for all the golf clubs, including putters, is 18 inches. The maximum length for all golf clubs except the putters is 48 inches. The putters do not have the maximum length limit. The shaft length has everything to do with the length of the golf clubs. The longer shaft does mean longer golf club length.
How long should a golf shaft be?
The chart recommends + 0.25 inches. It means that your golf shaft has to be made 0.25 inches longer than the standard length. Similarly, if your height is 66“ and the wrist to floor distance is 31.5 inches, the chart recommends – 0.75 inches.
What does a longer shaft mean?
The longer shaft does mean longer golf club length. A golfer uses woods, hybrids, and irons for different types of shots. It is the reason why their golf club is mostly empowered with a mix of these three. Therefore we must know about the standard length of the woods, and irons. Let’s first discuss the standard lengths of woods.
How to measure club size with LDA?
The following are steps of measuring the club size using the LDA method. Step 1. First, put the shaft against the wall so that the toe of the driver is placed on the ground. Step 2.
Where is the shaft of a putter located?
It is because the shaft of the putter is mostly installed in the heel. The shaft placement is either near the heel or in the center of the club head. Therefore, it is essential to measure the putter differently. The method of measuring the length of a putter is described in the following steps. Step 1.
Where to place ruler on golf club?
Place the club in the playing position so that the sole of the club / driver is touching the ground. A golf ruler is then placed at the backside of the club so that the top of the ruler is touching the ground by the club’s heel. Now, by using the reading on the measuring rod from the end of the grip cap.
How to measure golf club?
To measure a golf club, start by laying it on a flat, horizontal surface, like a table or countertop . Then, turn the bottom of the club head so it's at a 60-degree angle to the surface you're measuring the club on. Finally, use a tape measure to measure from the end of the grip to the point where the bottom of the club head meets the flat surface. ...
How to measure club length?
Calibrate the club length measuring apparatus. Turn on the machine and move the grip support assembly to the left until it reaches the end of the apparatus. Put the calibration rod into the machine, resting the right end of the rod against the 60-degree sole plate of the clubhead support.
How to rock a golf club back and forth?
Ensure the clubhead rests against the clubhead support, with the sole touching the 60-degree sole plate. The grip should rest in the grip support. Gently rock the club back and forth to be sure it’s not being constrained and can move naturally.
Where is the sole on a golf club?
The sole is the bottom of the club head. You may need to rest the sole against a plate to ensure it sits at the proper angle. Measure from the end of the grip to the end of the sole. Use a tape measure to find the length in inches between the end of the grip and the farthest point that the sole contacts the horizontal surface.
Which plane should golf clubs be measured on?
Clubs should be measured on a horizontal, rather than vertical, plane to get the most accurate results. ...
How to read scale on a scuba diver?
Slide the grip support until it touches the grip, then read the scale. Move the grip support to the right until the butt plate is gently touching the end of the grip. Step back from the scale and read the digital value. ...
How long should a golf club be?
According to USGA the length of a golf club should not exceed 48 inches. So, the length can be either 48 inches or lower. Within this limitation, you can get club sizes of any length depending on your height or style of play.
What size ruler do you need for golf club reading?
For this, you need a ruler of 48 inches or greater. You can use a measuring tape. However, the flexibility of the tape can hamper the entire procedure. For best readings use a golf club measuring ruler. Now, if you got the ruler in your hands, we can proceed. Follow these steps one after another: Step 1.
What is the best length for putters?
For putters. Analyzing the posture and wrist-to-floor measurement, 32-35” can be a good length for putters that most golfers will be comfortable with. Longer putters will cause several problems in your gameplay. It will restrict you from being close to the ball and miss targets in most cases.
What happens if you lie your golf club higher than the heel?
Placing the club with its toe higher than the heel will lessen your club length measurement. Number 2: If you do the opposite which means if the heel is higher above the ground than the toe then your club length will increase.
How long was the driver's club in the 1970s?
Manufacturers have invested in research and understanding user psychology to get the correct length of the club. During 1970s-80s, the drivers had 43 inches of length. For 5-woods it was even lesser, just 41 inches. The reason behind the shifts in club length is the mindset of the golfers.
Where is the ruler on a putter?
The ruler method can be used for putters. Instead of the heel, the ruler is placed beside the center of the putter. This means your ruler must be placed along the shaft to the ground. The ruler must be placed behind the club, and the final reading must be taken from the edge of the grip cap.
Is there a standard length of a golf club?
There is no standard length of a club in golf. So, club makers are free to make clubs that they feel are appropriate for a golfer. Here is what Tom Wishon, the founder of Tom Wishon Golf Technology, has to say- “There are no industry-wide standards for any golf club specification in the golf equipment industry.”.
How to measure a golf club?
For putters, you want to measure from the sole of the putter to the end of the grip. So, to do this, you need to follow the steps we outlie below. 1 Lay your putter flat on the ground 2 Begin with a tape measure at the top of the grip 3 Measure straight along the shaft, continuing through any offset or hosel change 4 Once you reach the bottom of the club, still going along the direction of the shaft, that is the length of your putter
How long do golf clubs have to be?
According to the USGA, golf clubs need to be within a certain length. All clubs (minus putters) must be at least 18 inches long, and no more than 48 inches. You should not have trouble meeting the minimum length or the longest length.
How to shorten a golf club?
When you need to shorten a golf club, you can keep the same shaft by physically cutting it. This is not a complicated process, but one that requires precision. First off, the club needs the grip removed. You’ll need a new one regardless so don’t bother trying to preserve it. After that the shaft is cut and regripped.
How to measure a putter shaft?
So, to do this, you need to follow the steps we outlie below. Lay your putter flat on the ground. Begin with a tape measure at the top of the grip. Measure straight along the s haft, continuing through any offset or hosel change.
How to measure golf club heel angle?
1. Lay the club flat so that the toe of the club faces directly up . 2. Make sure that the ground and middle of the club are at a 60-degree angle (club will sit this way if toe is directly up. 3. Measure from top of grip to spot where heel of club would intersect with the ground (60-degree angle coming in) Measuring these clubs has a bit more ...
Can you put a putter straight up?
Some people like to be straight up while putting, others prefer a bit hunched over. As long as your eyes are over the ball and the putter sits flat on the ground without the toe up in the air as you make your stroke, any length is fine. For putters, you want to measure from the sole of the putter to the end of the grip.
Do you need to buy a new shaft for a golf club?
All good-quality golf clubs can be re-shafted. You do not need to buy an entire new club if you need a new shaft. This luxury saves on expense, especially when it is only one club that needs replacing.
Why measure golf clubs?
You may also need to measure the clubs to ensure that they are regulation length for an upcoming tournament or event. It is important to know the proper way to measure the entire length of a golf club.
Where to place measuring stick on golf club?
Place the measuring stick directly behind the golf club . The stick should make contact with the shaft of the club and be placed on the ground right at the heel of the golf club you are measuring. The numbers on the stick should be pointed toward you so you can easily obtain a reading.
How to hold a golf club steady?
The face of the golf club should be laying flat on a flat surface so that the face is parallel to the ground. Then, place your hand on the top of the club to hold it steady.
How does a lengthened golf club work?
A longer distance can be achieved with a lengthened club if you have the ability to swing it with the same force and speed that you did with a shorter club . This increases the ball’s velocity upon impact, and you can hit it farther. Flex: The flex of the shaft will be altered. This happens for a few reasons.
What happens if you play too long in a golf club?
If the club is too long for you, then you’re spending extra time during ramp up which is the amount of time spent during your initial downswing. You want a balance between your abilities, ramp up, and momentum while cutting through the wind with as little resistance as possible.
Why are golf clubs made the way they are?
The reason clubs are made the way they are is to gather momentum as you swing down. If your club is too short, you’re going to build momentum while having resistance, meaning you will push too hard against the wind and not just swing naturally. There’s not enough weight to the club.
What happens if your woods aren't longer?
If your woods didn’t have the length that they do, and they were shorter, you’d be sending your ball almost straight up and they wouldn’t close much of a distance. It’s not always about the angling of the golf club head; sometimes it’s about the length and force to make it meet the ball.
Why do you have to swoop on your golf club?
Because the club is longer, you have to swoop on your downward swing, causing the force of your wood – if you’ve hit it correctly – to be applied to the bottom of the ball and send it upwards. A wood without enough length just doesn’t cut it. You’d be sending the ball higher but with almost no distance.
When shortening a golf club, do you have to remove the crown?
When you shorten a golf club, you have to remove the crown, and safely disconnect the shaft from the head.
Why did Lars start golfing?
Father of six and long-time golfer, Lars started golfing because of a summer job when he was nineteen, where he caddied for a Virginia state official. From that moment on, he fell in love with the sport, and made it a core staple in his life. Thirty-five years later, with thousands of games under his belt, he’s here to teach you the fundamentals and master techniques of golf, while recommending proper golfing gear and equipment for every step in your journey.
What is custom measurement golf?
Custom measurement is designed to equip you with golf clubs that suit your needs and your game type. These measurements are necessary for providing the appropriate golf clubs. The steps below outline steps for you to measure and acquire custom golf clubs from a golf store.
What happens if you play a golf club too long?
Your posture will be affected. If the club is too long, you will tend to be more upright. When the club is too short, you will tend to bend forward more than you should . You should therefore pick a club that is custom made for your type of play.
Why do you need to fit a golf club?
A custom-fit golf club will improve your game and performance on the scoreboard. Therefore you should fit your golf club appropriately per your type of play. As a golfer, you should make sure that your golf clubs are fitted to the appropriate lengths.
How tall is a man?
The average height for a human being varies from man to woman. A man’s average height stands at approximately 5’10” while that of their female counterparts stands at 5’5″. With these figures in mind, manufacturers design clubs with a 1″ difference in length between men and women.
Can a golf fitter ask you to swing a golf club?
The fitter can do more to make the measurements even better. In step two above, we note that the fitter can ask you to swing a standard golf club to understand your posture and how you swing the club. The measurements are necessary for coming up with the correct plus or minus adjustments.
How to measure wrist for golf club?
Step 2. Stand with your hands hanging loosely by your side. Have your assistant measure the distance from where your wrist hinges to the ground, going straight down. This is your wrist-to-floor measurement. Step 3. Use the "Golf Club Measurement Guide" (see Resources).
What is the average size of a golf club for women?
As a result, the standard size of golf club for women is shorter in length and is designed for women that are between 65-inches (5'5") and 69-inches (5'9") tall. For women who are shorter than 5'5", golf manufacturers produce a "petite" golf club that is both shorter and lighter than the standard length club.
How much shorter are ladies golf clubs than men?
Ladies' standard-sized golf clubs run approximately 1-inch shorter than men's clubs.
