A loose drive belt can result in your EZGO Golf Cart to lose top speed and underperform. If the drive belt is the right model but it seems to be too loose then it could be because there is something stuck in the clutch or there is some damage in the clutch. In this case you’ll need to call a certified technician to inspect your golf cart.
Full Answer
What happens if the drive belt is too loose on an EZGO?
A loose drive belt can result in your EZGO Golf Cart to lose top speed and underperform. If the drive belt is the right model but it seems to be too loose then it could be because there is something stuck in the clutch or there is some damage in the clutch.
Why is my EZGO golf cart losing top speed?
A loose drive belt can result in your EZGO Golf Cart to lose top speed and underperform. If the drive belt is the right model but it seems to be too loose then it could be because there is something stuck in the clutch or there is some damage in the clutch. In this case you’ll need to call a certified technician to inspect your golf cart.
Can a drive belt be too tight on a golf cart?
The drive belt should not be too tight. If it’s too tight it can risk wearing off faster and it’s also harder to shift gears. To check if your drive belt is set just right make sure your golf cart is turned off then check the drive belt by pressing it down between the two clutches with your finger.
What is the forward/reverse switch on an EZGO golf cart?
The Forward/Reverse switch carries the brunt of transmitting power from the battery to the motor. Over time it can become worn out and its contacts can burn. If this is the case you’ll need to have a certified technician to replace it with a new one that is made specifically for the EZGO TXT Golf Cart.
Why won't my EZGO golf cart go forward or reverse?
A EZGO golf cart may not go forward or reverse because of a malfunctioning microswitch, solenoid, or ignition switch. Loose or corroded cable connections or a faulty controller can also cause the golf cart to not move. Malfunctioning microswitch.
Why does my EZGO golf cart not move?
Why an EZGO Clicks but Won't Move? A EZGO golf cart can click but not move due to a faulty solenoid, or damage to the wires connecting the ITS coil to the controller. EZGO golf cart owners often assume that the batteries on their carts are fine and look for other reasons when faced with issues.
Where is the reset button on a EZGO golf cart?
Locate the motor Remove the panel so the electric motor is visible. Electric motors usually include reset buttons that can perform similar to circuit breakers. Look in the area where several electrical wires enter the motor and locate a small red button. This is the reset button.
Why is my golf cart clutch not engaging?
The battery might be the key reason for the clutch not engaging. If the battery is faulty, the clutch systems will fail to generate enough power and will not function. If this is the case, it is advisable to replace or fix the battery and the issue should be resolved.
How do you fix a golf cart that won't move?
When the cart won't move, you have to be sure that the batteries are sending sufficient power to the circuit. You must check the fuse. Use the voltmeter to check the voltage at the key switch. In a cart with batteries rated at 48V, it must show 48V at the key switch.
What would cause a golf cart not to move?
Solenoid Wear When there is a disruption in the flow of the electrical current, your cart will not operate. A common reason for current disruption is solenoid wear. Each time the solenoid activates as you press down on the gas pedal, the solenoid compounds down onto a thin metal contact plate.
Where is the reset button on golf cart motor?
First, you'll want to reset your motor. It should have a small reset button (Usually it will be red) located near the main battery supply. Hit the reset button and then put the cover back on the motor. The next step would be to recharge your cart and try turning it on again. If it starts up then you're in luck!
How do I know if my EZGO controller is bad?
Press the accelerator and watch to see if the voltage increases. It should increase from a reading of 0 to the full voltage of the battery. If the motor is not turning, the problem may be in the directional switch or motor. If there is no voltage, the controller is bad and must be replaced.
Do all electric golf cart motors have a reset button?
Electric golf cart motors have a reset button on their chassis which is designed to put your motor back into its original factory state. While it doesn't repair damage that may have occurred to the motor over the years, obviously, it does help to overturn any changes to the operation which may have occurred.
How does a EZGO golf cart clutch work?
1:143:28How a golf cart CVT slip drive clutch works - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd the rear drive clutch actually separates it widens causing the belt to drop down into the clutchMoreAnd the rear drive clutch actually separates it widens causing the belt to drop down into the clutch.
How do you adjust the belt on a EZ Go gas golf cart?
There is no way to adjust a drive belt, so it's important to get the right size belt in the first place. To be sure, visit your local mechanic or call a certified technician to help you get the right drive belt for your EZGO golf cart.
How does a secondary clutch work on a golf cart?
At rest, the drive clutch faces (sheaves) are separated by the wide drive belt. The driven (or secondary) clutch bolts onto the input shaft of the differential. The driven clutch sheaves are spring loaded together and the belt, at rest, rides up at the outer edge.
How do I push my E-Z-Go Golf Cart?
It can be frustrating when your battery is flat and your golf cart will not roll. To push it to the nearest charging or gas station, you need to release the motor brake. Follow these easy steps to do that.
How do you test an E-Z-Go Golf Cart Controller?
Depending on the E-Z-Go Golf cart you own, there are two types of controllers, the Drive control systems and the Precision Drive System. Only E-Z-Go carts made before 1994 have a Drive Control System. If you notice that your E-Z-Go golf cart is not running at a constant speed, you should troubleshoot the controller to identify the problem. Here are the steps you should use to test your E-Z-Go golf cart controller.
Why does my E-Z-Go Golf Cart feel sluggish when accelerating?
The reason why your golf cart is sluggish during acceleration or stalls depends on whether it is a gas cart or an electric one. Here are the reasons for sluggishness in both.
Why is my E-Z-Go golf cart losing power?
E-Z-Go golf carts often lose power because of corrosion or loose cables. If the connecting wires in electrical circuits break, your battery will lose power. The same will happen if you have a short circuit in the ignition system. Here are steps you can use to ensure that the system is working correctly.
Why won’t my gas golf cart charge the battery?
If you own a gas E-Z-Go golf cart, the battery may not get charged. Make sure that you have refueled your golf cart, and then check for the following issues.
Why is my reverse speed the same as my forward speed?
The reverse speed should be slower than your forward speed. If you notice that it is the same as your forward speed, you may have an ESC system malfunction. Make sure that you check the ESC system components and replace them.
Why does my golf cart stop moving?
This Golf cart is very temperamental, and even things like over-tightening a stud can make it stop moving. Check the F/R switch stud for overtightening. If it is over-tightened, the contact will not connect with the switch. Adjust this, and your golf cart will start working.
Why Won’t My EZGO Golf Cart Start?
EZGO golf carts may not start due to a transmission problem, corroded battery terminals or a faulty wiring coming from the ignition.
Why won't my EZGO RXV move?
Brake Problems: Many times the reason your RXV won’t move is because of brake problems. The RXV is designed to be disabled when there is a problem with the break. Many times, the wiring that connects the brakes to the controller gets loose or is damaged. This can disable your EZGO RXV.
How to unclog a golf cart muffler?
To unclog it, simply make a fire and remove your muffler and put it there.
What to do if replacing ignition wire doesn't work?
To check the continuity of the ignition wire you’ll need to use an ohmmeter or a continuity tester. To do this, set the switch to off and set your ohmmeter to X1.
Why does my golf cart make a clicking noise?
When you press your golf cart pedal you should hear a clicking noise, if you don’t hear a clicking noise there might be a problem with the solenoid. To make sure your solenoid is functioning properly check it with a voltmeter. If you hear a click then you need to check its power with the voltmeter.
Why is my golf cart ignitor failing?
The most common reason for a failed ignitor is a bad voltage regulator. Therefore, when you replace or fix the ignitor on your golf cart, make sure you also check the voltage regulator and see if it needs to be replaced. There have also been cases where the battery has switch polarity for some reason.
What do you need to troubleshoot a golf cart?
While both types of golf cart are different, there are two things you need to troubleshoot whether you have a gasoline or an electric golf cart; the fuse and ignition.
What is an EZGO golf cart?
Your EZGO golf cart is probably a more integral part of your life than you realize. If you live in a residential neighborhood or gated community, chances are that you use your golf cart for a wide variety of purposes beyond simply golfing―to take a trip to the nearby grocery store, to drive a mile or two to the country club or tennis courts down the road, to act as a makeshift hunting vehicle during hunting season, or even to fetch your mail in rainy or snowy weather.
What is the recommended tire pressure for an EZGO golf cart?
The standard recommended pressure of an EZGO cart’s tires ranges from 18 to 22 PSI.
What does the Ezgo manual say about golf cart batteries?
The EZGO manual says that, “First, a battery that performs poorly and is outside of the manufacturer’s specification should be identified in order to replace it under the terms of the manufacturer’s warranty.” This means that every manufacturer retains its own unique requirements, specs, and timelines. The less you procrastinate on troubleshooting your golf cart, the easier it will be to get faulty items repaired or replaced.
How many cycles does a golf cart battery take?
Your golf cart’s battery needs to mature completely before it can operate at its maximum levels. This can take as many as 100 full charge cycles, so be patient if the brand new golf cart you just purchased isn’t quite living up to its battery expectations.
How to tow a sandbox?
You should also make sure to raise the drive tires off the ground.The next step is to make sure that all your switches are in order. Flip the Tow / Run switch into “Run” when troubleshooting battery problems, or on “Tow” if you are taking a look at other issues, such as with the speed controller. Make sure that your key switch is turned ON; next, place the Forward / Reverse selector on FORWARD and place the pedal switch so that it is fully accelerating.
How to reset a golf cart motor?
This panel door is generally secured with several screws . Carefully remove them with a screwdriver. Then reset your cart’s motor; most golf cart electric motors contain a special button designed to reset the motor by behaving like a tiny circuit breaker.
Why is my golf cart foot pedal so smooth?
If you are having issues with the smoothness of your foot pedal, it may simply be due to the air quality of your surroundings and should eventually fix itself. If your golf cart is a few months or years old, the stickiness may be due to constant pressure.
Does an EZ Go golf cart go forward?
EZ-GO golf cart will not go forward or reverse. I hear
Does Ez Go Cart engage in drive?
Ez go cart transmission wont engage in either drive or
How many volts does an EZ Go golf cart have?
An EZ-GO golf cart will come either with a 36-volt or a 48-volt battery function. The cart will come with different charging receptacles, depending on the model that you have.
What happens if the charger goes bad on an EZ-GO?
If the charger goes malfunctions, it would not be able to charge the batteries.
What does it mean when a cart is insufficient power?
Insufficient cart power means the cart has a dead battery. The charger needs some signal from the cart to detect whether the device needs any voltage or not. When the battery goes dead, it fails to transmit the signal. As a result, the charger does not start charging the battery.
Why is my golf cart not charging?
Insufficient cart power means problems with the dead batteries. The charger may not be able to detect whether the battery requires any additional voltage or not if the battery of your cart goes dead. As a result, the golf cart battery chargerwill not start charging the batteries.
What happens when you plug in a charger?
When you plug in the charger, the charger will automatically decide whether the batteries require additional voltage or not. If the battery does, the charger will start charging the battery. But if something is wrong with the cart or the charger, the charging process may not start.
Why is my EZ Go charging?
Most EZ-GO golf carts charging problem tends to happen because of insufficient cart power, loose or damaged wiring, and charger malfunction or damage. An EZ-GO charger should function automatically if everything is okay with your cart. But if you face trouble while charging the battery, there must be something wrong with your golf cart or ...
What does it mean when a charger does not work?
If the charger does not operate automatically, these are the three primary issues that maybe are causing the problems-. Insufficient cart power. Insufficient cart power means problems with the dead batteries.