Since the shaft is broken so close to the head, you'll need a shaft puller like the one Golfsmith offers: Golfsmith Broken Graphite Shaft Puller at Golfsmith.com Secure the head in a vise (with some sort of cushioning of course), screw the puller in the broken shaft and heat it up, apply pressure to the puller and it should come out in a few minutes.
Full Answer
How to replace a broken golf shaft?
Replacing your own shaft can save time and money, and allow you to try a new shaft without purchasing new clubs. Step 1 Insert the broken shaft into the vise and remove the shaft by using the heat gun to warm up the hosel and loosen the adhesive that holds the shaft in place. Use medium heat for graphite shafts and higher heat for steel shafts.
How to reshaft a golf driver?
How to Reshaft a Golf Driver. 1 Step 1. Prepare the tip of the new driver shaft by scraping the paint and polyurethane off with a sharp knife. Make sure you don't cut in to the shaft ... 2 Step 2. 3 Step 3. 4 Step 4. 5 Step 5. More items
How to choose a driver shaft for a golfer?
Other characteristics such as the golfer’s height and arm length, and preferences also play a crucial role in replacing the shaft. In golf terminology, torque means the resistance towards twisting, which affects the experience or feeling a golfer has after handling a driver shaft.
Should I replace my old driver shafts?
Replacing your old shaft can be a relatively painless process for you or your local repair shop. If your favorite old driver seems to have run out of quality hits, you might want to refresh it by adding a new shaft to the club. A new shaft can put the wallop back in your trusty driver and have it hitting like a brand-new club.
Can you fix a snapped driver shaft?
Once a golf club shaft has been broken, it cannot be repaired, but it can easily be replaced. Shafts can be replaced at golf pro shops and most golf stores, but it is also a fairly easy project to do yourself.
How do you fix a broken driver shaft?
6:187:16Removing a Broken Graphite Shaft 2019 -Golf Club Repair - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo that's taken out a graphite shaft in a nutshell you get it hot you step drill it if you don'tMoreSo that's taken out a graphite shaft in a nutshell you get it hot you step drill it if you don't give a doesn't catch you can warble out the the make the drill hit the side so it will catch it then.
How do you reattach a driver head to shaft?
1:466:41HOW to FIX your GOLF CLUB if the HEAD comes off | Easy TutorialYouTubeStart of suggested clipEnd of suggested clipSome hot boiling water on it or if you have a heat gun just heat it up slightly on the low. Setting.MoreSome hot boiling water on it or if you have a heat gun just heat it up slightly on the low. Setting. Until it heats up enough.
How much does it cost to fix a broken golf club shaft?
The average cost to reshaft your golf clubs is $24 per club plus the cost of the shaft and grip. A new iron shaft and grip can range between $10 and $95 while a new driver shaft and grip can range between $18 and $440. The majority of the cost comes down to what type of shaft you want and what grips you like.
How much does it cost to Reshaft a driver?
The cost of reshafting a golf driver is between $15 and $45 USD. The labor cost of reshafting is usually around $20 USD. However, the actual overall cost can also depend on the materials used as well as the type of grip and shaft you are looking at.
Can you put a new shaft on a driver?
Replacing your old shaft can be a relatively painless process for you or your local repair shop. If your favorite old driver seems to have run out of quality hits, you might want to refresh it by adding a new shaft to the club.
Can you fix a broken driver head?
Can you repair a cracked driver? A cracked golf driver in most cases cannot be repaired but can be replaced. In pro golf stores, the golf shafts can be replaced with a new one to make you kick start afresh.How to Fix a Cracked Golf Driver (Replacement costs)https://www.golfstorageguide.com › how-to-fix-a-cracked...https://www.golfstorageguide.com › how-to-fix-a-cracked...Search for: Can you fix a broken driver head?
How do you fix a golf club shaft?
0:2510:45How to replace a golf club shaft - Step by Step - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou do have to buy the furrow which I think was a couple bucks. And then you have to buy the actual.MoreYou do have to buy the furrow which I think was a couple bucks. And then you have to buy the actual. The glue itself or the epoxy.How to replace a golf club shaft - Step by Step - YouTubehttps://www.youtube.com › watchhttps://www.youtube.com › watchSearch for: How do you fix a golf club shaft?
How do you put a shaft on a golf club?
5:117:44SHAFT INSTALL Steel - YouTubeYouTubeStart of suggested clipEnd of suggested clipOnce the ferrule is in position take the head and push the ferrule into its final position tap theMoreOnce the ferrule is in position take the head and push the ferrule into its final position tap the butt of the shaft on a hard surface to ensure the shaft is installed to the bottom of the hosel.SHAFT INSTALL Steel - YouTubehttps://www.youtube.com › watchhttps://www.youtube.com › watchSearch for: How do you put a shaft on a golf club?
How to remove a broken shaft from a golf club?
Insert the broken shaft into the vise and remove the shaft by using the heat gun to warm up the hosel and loosen the adhesive that holds the shaft in place. Use medium heat for graphite shafts and higher heat for steel shafts. Once the adhesive has started to melt, pull the broken shaft from the hosel, which is where the shaft meets the club head.
How to put a club shaft in a hosel?
Make sure the inside of the hosel is completely coated, then coat the tip of the shaft with epoxy. Slide the shaft into the hosel and turn the shaft so that the club head is properly aligned to the shaft. If there is a ferrule (small plastic piece), it should be inserted into the hosel first, then coat the interior with epoxy and slide the shaft in.
How to sand graphite shafts?
With the shaft still in the vise, use sandpaper to rough up the tip of the shaft, which will be inserted into the hosel. Graphite shafts may have coating on the end that should be removed with a sharp blade before sanding.
Can a golf club shaft be repaired?
Once a golf club shaft has been broken, it cannot be repaired, but it can easily be replaced.
How to keep golf clubs from splitting apart?
A wet shaft will eventually turn into a rusty heap of metal, causing your club to crack or split apart. Solution: Store your clubs indoors or outside under shelter. After playing a game of golf in the rain, use a towel to dry off your clubs. When washing your clubs, use as little water as possible.
Why do golf clubs break?
Golf clubs can break due to user error. Broken golf clubs occur when golfers slam the club head into the ground out of frustration. Incorrect storage of the club and poor swing technique will also cause shafts and heads to break.
What is a Project X HZRDUS shaft?
What is the Project X HZRDUS Black Fairway Wood shaft? Project X HZRDUS Black Fairway Wood shaft is a low spin golf shaft design. It comes with enhanced firmness over the entire length of the shaft....
Why do golfers smack their clubs into the ground?
It’s not uncommon to see golfers smacking their club into the ground out of anger . Obviously clubs were not designed to withstand such punishment. If you do find yourself with an anger problem on the golf course, you’ll find yourself visiting the golf store in no time.
Why are counterfeit golf clubs so cheap?
While counterfeit clubs are much cheaper than the real deal, there’s a reason why they’re so cheap. Unknowing golfers may not understand how one steel club is different to the other and choose to save some one on a clone. Counterfeit drivers and woods are particularly prone to a short life expectancy.
How long do golf clubs last?
However in a set of golf clubs, the driver and the set of woods are clubs that are more likely to break sooner. Expect a 2 to 5 year lifespan for drivers and woods.
Why do 3 woods break?
Woods, especially the 3 wood are prone to breaking sooner than other clubs in your set. This is due to ground contact that a 3 wood is likely to endure. General play and “fat shots” cause stress to the shafts kick point.
How to remove a shaft from a golf club?
Using propane or a torch, heat the hosel of the club to remove the steel shaft from the club head. The heat will break the epoxy bond that holds the head to the shaft.
How long to hold a golf club shaft?
Insert the shaft into the club head. Hold the head and shaft together for approximately 30 seconds to secure.
How to wrap a golf grip?
Apply the double-sided grip tape to the length of the grip wrapping it around the shaft . Leave 1/2 inch overhang in order to fold in the end of the shaft.
How to clean epoxy from golf club head?
Use a wire brush to clean out the remains of the old epoxy from the club head.
MtlJeff
doubt it's the rubber tees, have been hitting off them at my range for years and it's never happened to me nor have i seen it happen to anyone else there.
ifixclubs
hosel shots will also contribute to shaft failure...i havent seen too many graphite shafts last at all no matter how well you install it if the player hits a lot of hossel rockets...check his ball marks on the face of the club...
LowPost42
Clubmaking question- Is it really necessary to re-cone and de-burr an OEM graphite shafted driver when replacing the shaft? How about just checking the hosel to make sure it is smooth and reasonably coned from the factory?
driverwedge
I had 3 55-x DVS shafts do this. All in the Adams A3 last year. Pretty annoying. Not a big heel shot guy, but I do swing hard. Never hit the ground. Not sure why it happened, but I'm back to my stock original X-Speed Cobra. I kick the hell out of this thing and it's still with me after 3+ years. The heel shot discussion is pretty good info, though.
How long does it take to remove a golf shaft adapter?
However, you need to follow this process only if you are comfortable handling different tools. The entire process should take approximately one hour to finish.
How to choose a driver shaft?
To choose the right driver shaft, you will need to consider the weight and length of the shaft, along with the torque the driver produces.
What shaft adapter is compatible with Epic?
If a compatible shaft adapter is used, then the interchanging process is smooth. For example, the Callaway Driver Shaft Adapter is compatible with Epic, Big Bertha, Alpha 816, 815, Rogue, and X2 Hot.
How to put epoxy on a shaft?
Apply a coating of epoxy to the exterior tip of the shaft and the interior of the adapter. Place the shaft inside the adapter. One helpful tip would be to align the logo with the word ‘Neutral’ mentioned on the shaft.
What happens if a driver shaft is too soft?
On the other hand, if it is too soft, the shots will be very high and generate more spin than required. Your current driver shaft should be a benchmark for understanding whether the replacement shaft should have a harder or softer flex comparatively.
What is a Project X HZRDUS shaft?
What is the Project X HZRDUS Black Fairway Wood shaft? Project X HZRDUS Black Fairway Wood shaft is a low spin golf shaft design. It comes with enhanced firmness over the entire length of the shaft....
Why would a lower torque ball be better for twisting?
A lower measurement of the torque could lead to higher resistance, and a higher measurement could result in easier twisting. If your ball’s speed and its dispersal are unsatisfactory, then the driver shaft needs to be replaced with the right fit.
Feedback
I have a good quality puller (which I think is important here). I have pulled a couple of graphite shafts 4 times without a problem. The key is to have a shaft puller that pulls effectively/efficiently putting consistent pressure (parallel to the shaft) on the epoxy joint.
Feedback
It really depends on how cleanly you pull the shaft. If it never gets overheated, twisted, or shaved down too far, it can last almost indefinitly. The biggest causes of shaft failure from pulling are excessive heat, and a puller that doesn't pull the head off dead straight. GP
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
How to check contact area on golf club?
Easy, cheap way to check your contact area: get a can Dr. Scholls foot spray and apply it to the face of your club. I'm guessing you aren't hitting it off the heel, because heeled drivers feel awful and I think you'd know it. But it might be worth $5 just to check.
What is the meaning of "fix where you tend to strike the ball"?
Fixing where you tend to strike the ball is related to fixing your swing.
Can you bust a shaft by hitting a ball?
I have to agree with this. I have never, or ever seen someone, bust a shaft simply by hitting a ball! I have seen guys snap the shaft by slamming or throwing the club into the ground after a poor shot. Perhaps there was some pre-snap "abuse" of the club?