The standard lie angle of drivers and woods is in the range between 56 and 60 degrees, hybrid / rescue clubs between 58 and 62 degrees, irons between 61 and 64 degrees. For wedges it is nearly always 63 or 64 degrees. Flat Lie and Up Lie Sometimes, in the length fitting process, the lie angle is adjusted.
Full Answer
What is a flat lie angle on a golf club?
And there are three terms used in fitting golfers for lie angle: Standard lie angle: What off-the-shelf golf clubs are designed with. Flat lie angle: A lie angle that is lower than the standard lie angle (a 62-degree lie angle on a 9-iron is flatter than the standard 9-iron lie angle of around 64 degrees);
What is the Lie of a golf club?
The lie of a club is the angle formed by the intersection of the line of the shaft and the line of the ground when the clubhead is resting flat on the ground. That angle number is located between 0 and 90 degree and varies from club to club.
What is a “flatter” or “upright” Golf Club?
Sometimes, in the length fitting process, the lie angle is adjusted. Then, if the lie angle is reduced the golf club is “flatter”. Respectively, if the lie angle is increased, the golf club is more “upright”.
Can a golf club be bent 2 degrees flat?
– A golf club can be bent two degrees flat when the lie angle is lowered and the heel of the club is raised to a position that is higher than the toe of the club. Golfers change the lie angle of a club to better their chances of hitting the center of the clubface.
What lie angle should my golf clubs be?
Matching the lie angle of clubs to the specific golfer is one of the goals of a clubfitting session. Lie angles almost always range from the mid-50 degrees (in drivers) to the mid-60 degrees (in short irons). In irons, the range is typically from 59 or 60 degrees to around 64 degrees.
What is a flatter lie angle?
A flat lie angle means that the angle between the shaft and the ground is smaller, making the club shaft more flat as compared with the ground. If your club is too flat for your swing then it means that during your swing, the toe of the club will be lower than the heel (normally you want them level at impact).
What lie angle do I need?
Lie angle has a Greater impact on short irons than long irons, making lie angle a Major factor of accuracy in short irons and a Minor factor of accuracy in your long irons, fairway woods & driver. Standard lie angles on most irons will be approximate....Determining and Selecting Your Lie Angle.WoodsStandard Lie Angle657.5 deg758.0 deg5 more rows
Do shorter golfers need a flatter lie angle?
Generally, shorter golfers will need a flatter lie angle, whereas taller players will need a more upright lie angle. If you hit a lot of shots toward the toe of your club and your ball tends to fade to the right, you probably have a lie angle that is too flat for you.
How do I know if my lie angle is too flat?
Draw a straight line on the back of the golf ball, and have it facing the clubhead. After you make impact the line will appear on the face. If it's pointing towards the toe, then your club is too upright. If it's pointing towards the heel, then it's too flat.
What happens if lie is too flat?
If your lie angle is too flat, typically meaning it's closer to 0 degrees than 90 degrees, then that means you will typically hit the ground with your club with the toe side of the sole.
Does flattening lie affect loft?
The first thing to know is that lie angle being incorrect is the most important on clubs with more loft. The more loft a club has, the more magnified an incorrect lie angle will be when it comes to the direction of your golf ball. A 3 iron will be much less offline than a PW with the same lie angle.
What is the standard lie of a 7 iron?
62.5 degreesWhat Is The Standard Lie Angle For A 7 Iron? Most golf club manufacturers 7 iron lie angles are 62.5 degrees. This may vary from model to model depending on the length.
Does 1 degree lie angle make difference?
Yes it will make a difference, I play 2 degree upright and +1/2. If your hitting the ball left all the while (I am guessing your right handed) won't be to do with having the lye angle to flat.
What is the standard lie angle for irons?
The standard lie angle of drivers and woods is in the range between 56 and 60 degrees, hybrid / rescue clubs between 58 and 62 degrees, irons between 61 and 64 degrees. For wedges it is nearly always 63 or 64 degrees.
Does upright lie promote a draw?
The upright lie also promotes a left tilting spin axis, which leads to what's generally described as draw spin. An upright lie angle basically gives you a head start, but depending on the severity of the slice conditions the golfer generates, it certainly won't guarantee a draw.
What lie angle should my wedges be?
So generally think about putting in a gap wedge that's 48 or 50 degrees, a sand wedge that's between 54 and 56 degrees, and a lob wedge that's between 58 and 60 degrees. These are general guidelines, make sure you're working with your fitter to get the gapping that works best for you. 3.
What is the standard lie angle for drivers and woods?
The standard lie angle of drivers and woods is in the range between 56 and 60 degrees, hybrid / rescue clubs between 58 and 62 degrees, irons between 61 and 64 degrees. For wedges it is nearly always 63 or 64 degrees.
Is the golf club flatter if the lie angle is increased?
Then, if the lie angle is reduced the golf club is “flatter”. Respectively, if the lie angle is increased, the golf club is more “upright”.
What lie angle should my clubs be?
That question depends on many factors and is impossible to answer without seeing your swing and what clubs you are currently using. Though you can learn a great deal by using the impact board and the marker trick, it is best to seek out a professional club fitter so that you can enjoy the best possible results on the course. If you are in the market for a new set of golf clubs, the fitting is thrown in for free as long as you commit to buying.
How do you measure the lie angle of a golf club?
The old-school way of measuring lie angle uses a couple of commonly used golf tools: an impact board and some tape. Tape up the sole of your golf club and hit a few shots off the impact board. By looking at both the tape and the impact board, you can tell what general type of lie angle you need.
Why is it so important to have clubs with the right lie angle?
However, if your equipment is always working against you, you will constantly be fighting your golf swing on the course. This is no fun and leads to lots of frustration during your rounds.
What happens if the ink is angled toward the heel of the clubface?
If the ink is angled toward the toe of your clubface, the club you are using has too much of an upright lie angle. Conversely, if the ink points toward the heel of the clubface, the lie angle is too flat for your swing.
What is the second most common lie angle?
This lie angle is the second most common type because lots of amateur golfers struggle with an over-the-top swing plane and the upright lie angle helps keep the ball from heading too far to the right each time. Be careful with going with too much of an upright lie, though, as this could lead to those dreaded sharp duck hooks into the water that we all hate.
What is an upright lie angle?
An upright lie angle is when the toe of the club is up off the ground. Though it depends more on the golfer’s individual swing, their overall height plays a role. As a general rule of thumb, taller golfers usually need a tad bit more of an upright lie in their irons.
Why does my golf club never touch the ground?
You may also notice that the heel of your golf club will never touch the ground if the lie angle is too flat.
What is the lie of a golf club?
The lie of a club is the angle formed by the intersection of the line of the shaft and the line of the ground when the clubhead is resting flat on the ground. That angle number is located between 0 and 90 degree and varies from club to club.
What does "lie" mean in golf?
Lie can also refer to the environment in which the ball finds itself, the ball or shot lie. It can also refer to the number of strokes a player has taken up to a point on a given hole.
Why is it important to use the correct lies in golf clubs?
Using clubs with the correct lies can prove crucial when working to maximize the chances of hitting the ball straight. Indeed, a club that is too upright for its golfer will see its toe lift from the ground instead of laying flat and as a result balls struck with it will tend to go left of the intended target.
What happens if you hit a ball with a flat piece of plastic?
Using that tape and hitting balls from a flat piece of plastic will leave an impression on where the sole hit hardest on the ground. If the impression on the tape is made in the center you are using the correct lie. If the impression is close to the heel, you are using clubs that are too flat.
What is the lie angle of a golf club?
It's always an acute angle, less than 90 degrees. The lie angle dictates, in part, where your hands will be positioned on the golf club, relative to the ground, at address.
What does it mean when your golf club is lying?
Well, you need to know how lie angle can affect ball flight. If your lie angle is too upright, typically meaning that it's closer to 90 degrees than 0 degrees, then that means you will typically hit the ground with your club with the heel side of the sole.
What does it mean when your golf club is on the toe side of the sole?
If your lie angle is too flat, typically meaning it' s closer to 0 degrees than 90 degrees, then that means you will typically hit the ground with your club with the toe side of the sole. Hitting the ground with the toe of the sole means you're hitting with an open face, leading to a fade or a slice, meaning the ball will sail well right ...
What does it mean when a clubfitter adjusts the lie angle?
If you're liking the club but not quite hitting it how you'd like with your lie angle, then the clubfitter can make an adjustment that could mean the difference between having the right club for you or not.
How to know if you stand at address?
It's also important to know how you stand at address (more upright or flat), your height (taller players tend to stand more upright, but not universally) and the distance from your hands at address to the ground with your clubs.
Which golf clubs have flatter lie angles?
Long clubs have flatter lie angles than shorter clubs, so the angle formed with a driver is going to be lower than with a pitching wedge, for instance.
What is the lie angle of a golf club?
The lie angle of a golf club is the angle that is formed between the club shaft and the ground when the club is soled properly at address.
Why does lie angle matter?
Lie angle matters because it impacts the direction that the clubface is pointing at the moment of impact. If your lie angles are way off, it’s going to be hard to hit the ball accurately. And, if you do manage to hit the ball accurately, you’ll need to make some adjustments or compensations to make it happen.
What is the best angle for a pitching wedge?
Why is Lie Angle Actually Important? 1 A common lie angle for a pitching wedge is 64*. If that happens to be a good fit for your game and your swing, you’ll be in good shape. However, for many players, that is going to be either too upright or too flat. 2 It that’s too upright for you, the toe of the club is going to be up in the air at impact, while the heel digs into the turf. This is a problem because the clubface will be effectively shut at impact, and the ball will likely go left. Even if you make a good swing, the result may not be what you want because of the lie angle. 3 On the other hand, if that 64* angle is too flat, the heel will be off the ground at impact and the toe will dig in. This is going to typically lead to misses to the right of the target.
What to do if your divots aren't nice and square?
If your divots aren’t nice and square in the back, there is a good chance you need a lie angle adjustment.
What happens if your 64 angle is too flat?
On the other hand, if that 64* angle is too flat, the heel will be off the ground at impact and the toe will dig in. This is going to typically lead to misses to the right of the target.
Can you change the angle of your irons?
If it turns out that your lie angles need to be changed, it may be possible to have your current irons bent into the right position. That doesn’t work with drivers, but many of the modern drivers on the market today can be adjusted by changing the position of the shaft in the hosel.
Why do golfers change the lie angle of their clubs?
Golfers change the lie angle of a club to better their chances of hitting the center of the clubface. Changing the lie angle of a club can help golfers more consistently hit shots off of the center of the clubface. There are however a few key points that golfers need to know about changing the lie angle of their club so ...
What is flat lie angle?
A flat lie angle is simply when the heel of the golf club is bent so it is higher than the toe. Club fitters are able to bend clubs to increase or decrease the lie angle using a loft, lie bending machine. (more on this down below)
What does 2 degrees flat mean?
What does 2 degrees flat mean? – A golf club can be bent two degrees flat when the lie angle is lowered and the heel of the club is raised to a position that is higher than the toe of the club. Golfers change the lie angle of a club to better their chances of hitting the center of the clubface.
How to get loft and lie adjusted?
The best way to get your loft and lie adjusted is by a professional club fitter. I highly recommend that golfers get fitted “before” making a large purchase on golf clubs. To do this, simply Google, “Golf Club Fitters Near Me” and you will get a great list of places that will make sure you are playing the right lie angle for your game.
How many degrees should a golf club be bent?
A club can either be bent to an upright position (toe higher than heel) or flat (toe lower than heel) usually in increments of 1 or 2 degrees . When looking for clubs that fit your game, a professional club fitter will look at these factors down below to determine what their lie angle should be: A golfers height. A golfers grip.
What is a standard lie?
Standard lie – Unaltered lie angle. Upright lie- The toe of the club is bent higher than the heel of the club (lie angle is higher than a standard lie) Flat lie – The toe of the club is bent lower than the heel of the club (lie angle is lower than a standard lie) A club can either be bent to an upright position (toe higher than heel) ...
Where does the golf ball start?
Your golf ball starts off towards the left of your target (right for lefties). You hit the golf ball off of the heel of the club often causing the golf ball to hook or pull.
What is plus and minus golf clubs?
The adjustments on a size chart are made with reference to the standard clubs. Therefore, the plus and minus values show how much shorter or longer your golf club should be compared to the standard, according to your measurements, ...
How tall is a golf club?
Manufacturers usually make clubs to account for golfers anywhere between 4’8” to 6’7” inches tall. The second measurement is wrist-to-floor distance. This is done by standing on a flat surface with your arms relaxed and pointing down. You then measure the distance between the ground and the line where your wrist meets your hand.
What factors affect the size of a golf club?
Here’s another factor that affects the appropriate golf club size. The angle and the grip size of the club are as important as the height and wrist-to-floor measurements . However, this means more to serious professional golfers than to someone just starting out.
What is custom fitting golf?
Custom golf fittings will tell you the exact sizes that you need for each of your golf clubs. Knowing the proper golf club sizes will ensure that you can get the clubface to match up to the ball each and every time you swing. The more accurate your club sizes are, the better the chance you have of scoring and performing. Even though custom golf fittings can be expensive, most golfers find them to be very well worth the pricing.
How to adjust golf clubs?
If you find that your golf clubs are not the exact length you need, you can adjust them by cutting or extending the clubs and then regripping them . If you don’t have the tools to do this yourself, there are typically local golf club repair shops that offer these services.
Why do manufacturers make golf tables?
Manufacturers create such tables to help everyone from beginner golfers to pro golfers choose the right club size for their play. Here’s how your size affects the dimensions of your needed golf club size and why it matters. Last but not least, the grip size should also be determined for the club to fit perfectly in your hands.
What is the difference between men's and women's golf clubs?
The difference between men’s and women’s clubs is generally noticeable on the grip. Men’s golf clubs have larger grips and are also about 2.5 cm longer than women’s golf clubs. Kids’ clubs are even smaller than women’s for the most part. Knowing what type of golf club you need is the first step in determining the appropriate size.
What is a greater than standard lie angle?
A Greater than standard lie angle is considered an Up Right lie angle.
What is the angle of the club shaft when you hit the ball?
Lie angle is the angle the club shaft makes with the ground when you HIT the ball and your club head is parallel with the ground.
How to wear golf shoes?
While wearing your golf shoes or street shoes stand on the floor with your normal posture, looking straight ahead, and have your arms hanging in a relaxed position by your sides.
Nominal Lie Angle
- The lie angle of the golf club is the angle formed between the center of the shaft and the sole of the club (ground), when the club is in its proper address position (grooves parallel to the ground) – see picture below.
Measurement of Lie Angle
- In practice it could be a little difficult to measure the lie angle with a protractor. However, it is quite easy to measure it using one of the many available smartphone applications. The application should measure the deviation of the device from the vertical. Just remember to carefully align the grooves on the face parallel to the level / ground. Such a measurement is sho…
Flat Lie and Up Lie
- Sometimes, in the length fitting process, the lie angle is adjusted. Then, if the lie angle is reduced the golf club is “flatter”. Respectively, if the lie angle is increased, the golf club is more “upright”. Such adjustment is expressed in degrees: a number of degrees ( usually 1 … 3 ) flat or up. The picture below shows the example of altering th...
Changes of Lie Angle
- Changing the lie angle of a club does not affect its swingweight nor MOI (MOIG). However, such change influences the optimal position of the club when the player adressing the ball. A popular rule indicates that, to maintain the same position of the player, changing the lie angle by 1 degreerequires ½ inch change in length. Unfortunately, this is only an inaccurate approximation …