Where are MacGregor Golf clubs made?
MacGregor Golf is a sports equipment manufacturing company based in Albany, Georgia, which specializes in golf. MacGregor currently produces a wide range of golf clubs, bags, and accessories. The company roots can be traced to 1829, with the establishment of "Dayton Last Company", a maker of hand-carved wooden lasts for footwear.
Do J MacGregor irons have inserts?
A MacGregor catalog described it as follows: “Used by Charles (Chick) Evans and many other prominent golfers, the J. MacGregor Ivory Face Clubs have made a Big Hit.” Irons, by the rules of golf, could not have inserts.
What was John MacGregor like as a golfer?
He was never much of a golfer, by professional standards, but he had a long and distinguished career in American golf that included helping found the PGA of America; he was the association’s first president. Incidentally, he also helped create MacGregor Golf.
What is a MacGregor head made of?
Starting as a round billet of soft carbon steel, a raw forged iron head went through nearly 50 stages of sculpting before it was crowned with the MacGregor stamp. There was a time when the MacGregor name carried clout. It said, Byron Nelson once won 11 tournaments in a row with me. It said, Johnny Miller shot a U.S. Open-record 63 with me.
Where are MacGregor golf clubs manufactured?
Albany, GeorgiaMacGregor Golf is a sports equipment manufacturing company based in Albany, Georgia, which specializes in golf. MacGregor currently produces a wide range of golf clubs, bags, and accessories.
What golf clubs are not made in China?
Some of the best-known brands that sell made in USA golf clubs are discussed below.Cleveland. Cleveland is renowned for its quality golf clubs, especially for its range of CBX and RTX wedges. ... Ping. ... PXG. ... Titleist. ... Wilson. ... Cobra.
Is MacGregor a good golf make?
We found them to launch high and were impressed with the forgiveness on offer. They look absolutely fine too and the feel is not too bad considering we were testing them up against forged musclebacks. They go the distance you'd expect them to go and work well with MacGregor's lightweight graphite shafts.
What kind of wood were golf clubs made of?
These golf clubs were made up of wood with the shafts being made from ash or hazel and the club heads being made from tougher wood like apple, holly, beech or pear. The club head would be connected to the shaft with a splint and then bound with a leather strap.
Are any golf clubs made in USA?
The only major golf club company that is still manufacturing clubs in the USA is Ping. Ping started making putters many years ago and has continued to expand and grow and make as many of their clubs on American soil as possible.
Are any golf clubs made in the UK?
MacGregor Golf This is a UK company that's been around for a long time and continues to make golf clubs.
Do any pros use MacGregor?
Do Any Pros Use MacGregor Golf Clubs? These days, no. But MacGregor clubs have been used by players such as Jack Nicklaus, Tom Watson, Johnny Miller and Tom Weiskopf in the past.
How old are MacGregor golf clubs?
But did you know MacGregor is No. 2 with 59? MacGregor's history dates all the way back to 1829. That's when English immigrants and expert wood craftsmen Archibald and Ziba Crawford founded the Dayton Last Company in Dayton, Ohio.
What happened to MacGregor?
Conor McGregor bore the brunt of Dustin Poirier's stinging calf kicks in the main event of UFC 257. The damage to McGregor's right leg was so severe that the 32-year-old Irishman was not able to walk, forcing him to leave the Etihad arena on crutches. However, his leg is not paralyzed.
When did golf clubs stop being made of wood?
Wooden heads predominated until the late 1980s. They had evolved to include a metal sole and a metal or plastic faceplate. These wooden headed clubs were dense and heavy, and were generally much smaller than today's clubheads.
What are most golf clubs made of?
The club heads were often made from woods including apple, pear, dogwood, and beech in the early times until persimmon became the main material. Golf clubs have been improved and the shafts are now made of steel, titanium, other types of metals or carbon fiber.
What metal are old golf clubs made of?
The steel used for forged irons is carbon steel. This is the material that has been used for quality clubs since the 1800's. Carbon steel is made from good old fashioned iron combined with carbon.
What is MacGregor Golf?
The MacGregor Golf Co. was founded on innovation — on the creative process of making something new from existing resources. And through the thick and thin of a storied business history, the company has maintained that particular inventive genius in golf equipment design and manufacture.
How did MacGregor Golf get its name?
How MacGregor Got Its Name. There is a subtle touch of innovation in how MacGregor Golf got its name. In March 1898, Edward Canby hired Willie Dunn as his head staff professional. Dunn was the eldest member of a famous Scottish golfing family.
How did John McGregor get his name?
The interesting thing about this is how John McGregor’s name came to be spelled MacGregor, in respect to its use by the company. The Gaelic word “Mac” was used originally by both Scots and Irish as a prefix to surnames. MacGregor is to say, son of Gregor. At some point in time, though, Mac also came to be spelled Mc.
How much hickory was used in golf clubs?
A newspaper account of the test also made an argument for the coming of steel, noting that it was more uniform and durable than hickory, cheaper to buy, and that with the growing popularity of golf, some 5,000,000 feet of hickory was used annually for golf clubs. In short, the hickory supply was becoming limited.
When were inserts used in golf clubs?
The first use of inserts in wooden head clubfaces came around the middle of the 19th century, with the advent of the gutta-percha ball. Until then, the golf ball was a leather bag filled with feathers. It was not much of a threat to the condition of the clubface. The solid, hard-rubber gutta-percha, however, caused nicks and dents in clubfaces, and finally just wore them out. To prevent this, someone got the idea of putting a slab of thick leather into the center of the clubface. It made manufacture costlier, but saved throwing the entire club away when it became too guttie-worn.
When did golf clubs start using inserts?
It was felt that an insert of the right material could give the already much peppier new golf ball an even faster sendoff, and added distance. Thus, in 1913 the company began offering clubs with a variety of insert materials — for example, one of compressed paper.
Who taught golf in 1894?
Golf pros of the time were jacks-of- all-trades — they taught golf, maintained the course, made clubs. One day, in 1894, while the professional at the Myopia Hunt Club, in Massachusetts, White was in his shop laboring over a new wood clubhead. A local carpenter, named Gardner, happened by.
Where is MacGregor Golf made?
MacGregor Golf is a sports equipment manufacturing company based in Albany, Georgia, which specializes in golf. MacGregor currently produces a wide range of golf clubs, bags, and accessories. The company roots can be traced to 1829, with the establishment of "Dayton Last Company", a maker of hand-carved wooden lasts for footwear.
Who owns MacGregor Golf?
In May 2009, MacGregor was acquired by Golfsmith International and Norman stepped down as chairman. Golfsmith owned the company until it fell into bankruptcy in 2016. At the time of its demise, Golfsmith was the largest golf retailer in the world.
Who bought McGregor and Canby?
During the 1930s Crawford, McGregor & Canby was acquired by the Goldsmith Company to form MacGregor-Goldsmith. The new owners found the name "MacGregor" to be stronger than "Goldsmith" in the marketplace and subsequently changed the name of the firm to MacGregor.
From Shoes to Golf
The Crawford heirs eventually brought in two new partners to their company: John McGregor (note the spelling) in 1875 and Edward Canby in 1886 to eventually form the Crawford, McGregor and Canby Company. McGregor was a Scottish immigrant from St Andrews and a hardcore golfer. He eventually got Canby hooked on the game, setting the wheels in motion.
The Market Changes
By 1927, retail golf sales exceeded pro shop sales for the very first time. Crawford, McGregor and Canby went all in, mass-producing low-cost, high-profit clubs. Record sales and profits followed and everything was looking rosy.
MacGregor Goes KA-BOOM!
With Armour and his assistant, Toney Penna, onboard, MacGregor soon exploded. Penna played MacGregor clubs on the PGA TOUR and recruited other Tour players to join him. He hit the jackpot in 1939 when he signed Jimmy Demaret, Byron Nelson and Ben Hogan.
Brunswick, Jack and the Beginning of the End
In 1958, MacGregor was sold to bowling giant Brunswick. Owner Ted Bensginer made a killing when he developed the first automatic pinsetter and started buying up companies to grow his empire.
The Ownership Carousel
In 1978, Brunswick sold MacGregor to the Wickes Corporation. Wickes was a world leader in lumber sales and owned Snyder Drug and Red Owl supermarkets. Several of Wickes’s top brass were golf nuts so MacGregor seemed like the perfect toy.
Amer and Irrelevance
MacGregor was making money again but Jack’s golf course business was in a jam. Specifically, the St. Andrews project in New York was becoming a money pit and Jack needed cash fast. So, in 1988, he sold 80 percent of MacGregor to the Amer Group from Finland for $8 million—the same Amer that would also buy Wilson Sporting Goods.
Schneider and The Shark
The Schneider years were a roller coaster for MacGregor. Big TV ad campaigns alternated with big cutbacks. Message and marketing consistency was long gone as MacGregor ran through eight ad agencies in 15 years. Schneider tried dumping the company in 2000 but found no takers.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Sony Open Pics from January 11, 2022 Part 1
I was able to get out to the Sony Open today to take a few pics. I guess due to Covid precautions they kept the spectators pretty far from the players. Also due to camera...
Titleist Vokey SM9 Link on Wedge Works Coming Soon- UPDATED Pics Added Pg 4
Looks like there is a link on Titleist Wedge Works for the new Vokey SM9, but doesn't show any photos yet.
Cobra 2022 Plans
Anyone have info on Cobra's plans for the upcoming release season? I know the blades are new and assume the King Tours are sticking around for another year (or...
When did MacGregor Golf start making clubs?
MacGregor Golf, which began making clubs in 1897, pioneered many of the advances in golf equipment. Lest anyone forget MacGregor's prowess as a maker of forged blades, the company passed down from one generation of its heralded craftsmen to the next the proper technique for grinding irons.
Who was the sweet swinger in golf?
It was Penna, a Tour winner known as “the sweet swinger,†who recruited the greatest names in golf to play under the MacGregor banner. The advisory staff also included future Hall of Fame members Jack Burke Jr., Craig Wood and Louise Suggs. By the 1950s, Penna had risen to chief designer.
Did MacGregor make his own golf ball?
MacGregor began selling a golf ball under its name, but produced by a third-party prior to World War II. After the war, MacGregor adapted a machine devised to automatically wind baseballs to begin manufacturing its own golf ball.