One of the common reasons for a stuck tape could be a defective eject button. In that case, you need to help the eject button a little bit. So, get a flat-head screwdriver or something similar to that shape. Next, press the Eject button, and the tape will start to rise.
Full Answer
How do I eject a cartridge from a tape drive?
Wait for two minutes for the cartridge to eject, then remove the cartridge by hand. The host had previously sent a PREVENT MEDIUM REMOVAL command to the tape drive, so that it would not eject. Issue the ALLOW MEDIUM REMOVAL command to the drive. Issue an Eject command from the relevant host.
How to remove a stuck tape from a cassette player?
But basically, you will need to unmount the cassette player if it is in your car. If it is a cassette player, then you need to unscrew the cassette deck from the player. After that, you will be able to remove the stuck tape from the cassette player with ease.
How do I eject a tape drive from a host?
The Drive Activity LED should blink to indicate activity. Wait for two minutes for the cartridge to eject, then remove the cartridge by hand. The host had previously sent a PREVENT MEDIUM REMOVAL command to the tape drive, so that it would not eject. Issue the ALLOW MEDIUM REMOVAL command to the drive. Issue an Eject command from the relevant host.
Why is the tape not unloading from my cartridge?
Cartridge problems (leader pin mis-positioned, broken tape leader, and so forth) can prevent the tape from unloading, requiring manual tape removal. Pause the Library and open the door in front of the problem drive and inspect the drive SINGLE CHARACTER DISPLAY (SCD).
Tape Stuck in Camcorder : Two Scenarios
There are two scenarios here. First, the camcorder powers on but you can’t eject the tape.
Tape Will Not Eject When You Power On Your Video Camera
This is an instance of tape stuck in the cassette compartment of your camcorder. When you power on your camcorder and press the Eject button, the camcorder tape door won’t open.
Camcorder with Tape Stuck Without Power
What if you can’t power on the camcorder at all. Your battery is dead after leaving it lying around for years. Also, your AC adapter is not working. You’re now faced with the problem of getting the tape out of a dead camcorder.
Tutorial on How to Remove a Stuck Tape from a Cassette Player
One of the common reasons for a stuck tape could be a defective eject button. In that case, you need to help the eject button a little bit. So, get a flat-head screwdriver or something similar to that shape. Next, press the Eject button, and the tape will start to rise.
Final Lines
So there you have it. If you have read the post above, you should be familiar with some tips on removing a stuck tape or cassette from a car cassette player. Back in the day, it was a prevalent issue with the cassette players in the cars. However, with the advancement of technology, you don’t have to use this type of cassette player anymore.
