Golf-FAQ.com

proper address when hitting irons in golf

by Ms. Magdalen Mayer Jr. Published 2 years ago Updated 2 years ago
image

When addressing the ball with an iron, the general rule of thumb is that the ball position should be at the center, right between your feet. However, you should note that irons come in different lengths, affecting how you position the ball. How high or low you want to hit also impacts how you should position the ball.

Part of a video titled Proper Golf Stance for Driver vs Irons - YouTube
7:02
9:34
Tiny bit of step. Big step backwards. Okay now this stance width should be at least shoulder widthMoreTiny bit of step. Big step backwards. Okay now this stance width should be at least shoulder width apart or maybe a little bit more but more importantly.

Full Answer

Where should the golf ball be positioned when hitting Irons?

As you learn how to hit irons, you want to always note where the golf ball is in relation to: And the correct position varies slightly depending on whether you’re using a long iron or a short iron. Let’s break this down. When using a short iron, make sure the ball is positioned in the center of your golf stance.

Should you hit irons up or down on the ball?

It just makes sense. For pure iron shots, however, the goal is to hit down on the golf ball. Another way to say this is that your moment of impact should occur before the low point of your golf swing. It’s important to make this distinction when discussing how to hit irons because this whole down/up thing trips up a lot of golfers.

Where do you place the golf ball at address?

Where (How) to Position the Ball at Address. At address, the ball will be located in front of you, somewhere in between your two feet. It will normally be located in the middle when using a short iron and progressively towards the front foot as the length of the club increases.

How do you check your iron and stance setup when playing golf?

The best way to check your iron and stance setup when addressing the golf ball is to put together a simple routine to remind yourself of how you should be lining up. Just approaching the ball and unleashing a shot out of the blue won’t yield any type of consistency.

image

How do you address iron shots in golf?

3:254:01How to Address the Golf Ball (Golf Setup) - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo here we go let's go through the process. Feet together separate separate so I'm shoulder-widthMoreSo here we go let's go through the process. Feet together separate separate so I'm shoulder-width bump the hip a little bit okay ball.

How should my irons look at address?

0:273:33GOLF TIP - HOW YOUR GOLF IRON SHOULD SIT - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo the toe is slightly raised to allow for the the dynamic movement to impact where the chef raisesMoreSo the toe is slightly raised to allow for the the dynamic movement to impact where the chef raises under and the.

How do you properly contact with irons?

2:307:413 Golf Swing Drills For Irons (SOLID CONTACT!) - YouTubeYouTubeStart of suggested clipEnd of suggested clipHit and hold it in order to do that you've got to have your ducks in a row you've got to have yourMoreHit and hold it in order to do that you've got to have your ducks in a row you've got to have your core working your arm stable. And you'll start to hit a really good feel so let me try one.

Should irons lie flat at address?

How should a golf club lie on the ground? The golf club should address the ball with the toe set a few millimetres in the air – the clubhead should never sit flat on the turf. You should be able to fit a small coin under the toe of the club at address, with the heel remaining in contact with the ground.

How do I make sure clubface is square at my address?

3:376:27How to tell if your club face is square! - YouTubeYouTubeStart of suggested clipEnd of suggested clipOver to this alignment stick that is perpendicular to the target line and if the grooves match upMoreOver to this alignment stick that is perpendicular to the target line and if the grooves match up then the club face is square.

What part of the golf ball should I look at during address?

At address, try looking at the very back edge of the ball and hold your eyes there throughout the swing. If you are trying to hit a specific kind of ball flight, such as a fade or a draw, you may want to look slightly to the inside or outside of the back of the ball as your ideal contact point.

How do I hit my irons every time I flush?

1:504:36How to Hit FLUSH IRON SHOTS with the Perfect Golf Takeaway - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe button in the club's gonna arc in clubhead's gonna stay out flush iron. Oh that was really solidMoreThe button in the club's gonna arc in clubhead's gonna stay out flush iron. Oh that was really solid a little divot. All right ball contact and then divot. And that was set up by that takeaway.

Should your hands be in front of the golf ball at address?

At address, your hands should be slightly in front of the ball – exactly where you want them to return when you make contact. Also, make sure your left wrist (for a right-handed golfer) is in a relatively flat, firm position.

Should I bend my irons upright?

If your club is too upright at impact, then your shots will travel to the left of your target. Conversely, if your club is too flat, then your shots will be heading right. For every degree that your lie angle is either too upright or flat, the ball will initially travel 4 yards off your intended target line.

What happens if irons are too upright?

But if your clubs are too upright, the toe would be off the ground, and you'd have a tendency to pull the ball (inset, top). Too flat, and the heel would be up, and you'd tend to hit pushes (inset, bottom). Starting with the face slightly off can produce exponential misses, so make sure your clubs fit.

When addressing the golf ball with your iron, is it important to recognize?

Again it’s very important to recognize when addressing the golf ball with your iron.

What is the best way to position a golf club on the grass?

When you sole your club on the grass you want the bottom of the club to sit flat to the surface of the grass then ever so slightly toed up.

How to measure a golf club?

Enlist the help of a friend for a simple measure . Once you have the club head in this flat to the ground and slightly toed up position. Have your friend slide a piece of paper under the toe of the club. The paper should slide under the toe of the clubhead slightly. The paper should be stopped just before it reaches the middle of the clubhead.

What happens when paper is slid under the toe of the golf club?

When the paper is slid under the toe of the club and it easily slides clearly through to the heel of the club, the golf club position is too flat. The grip end of the golf club should be lifted which will lower the toe of the club closer to the ground surface.

How to impact a golf ball?

The result of this is the club shaft has a slight press forward look. This press forward affect will carry forward into our swings and impact position. When you’re impacting the golf ball the clubhead impacts the golf ball then enters the ground to take a small divot.

Why is there a club shaft on a plane?

Clubshaft on plane as a result of good clubhead position.

What happens if a golf club scuffs too close to the toe?

If the scuff is too close to the toe, the golf club needs to be positioned more flat. The grip end needs to be lowered in the set-up.

How to strike a golf ball in the middle of your swing?

With the ball in the middle of your stance, place the clubhead behind the ball at address, with the shaft leaning slightly forward. When the shaft is leaning forward and the ball is in the middle of your stance, your normal swing automatically creates a downward strike on the ball.

What does it mean to set up with the ball in the middle of your stance?

In this position, the clubhead is still moving downward when your normal downswing brings it into contact with the ball.

When you swing the ball up in the air, should you swing it?

When most players want the ball to go up in the air, they think they should swing upward. When you are hitting a drive, where the ball is perched on a tee, this is correct. However, when the ball is sitting on the ground, an upward strike is impossible. To get the ball up in the air using an iron, you must hit down on it with a descending strike.

Do you take a divot on a high handicap?

They stand up as the clubhead reaches the ball, which results in a thin hit. Make sure you stay level when you make your downswing. Not only will you take a divot, but you also will be rewarded with a solid hit.

Can Sergio Garcia hit an iron?

For too many golfers, irons are a mystery. Even though they hit solid drives off the tee and perhaps can even hit an iron off a tee, they simply cannot hit an iron shot off the ground, ...

Do you divot in front of the ball?

The divot should not be very deep. Some players do not take much of a divot at all. However, the divot should be in front of the ball. If the divot begins behind the ball, it means you have hit the ball fat.

What to do if you struggle more with iron shots than you do hitting it off the tee?

In fact, if you struggle more with your iron shots than you do hitting it off the tee, ball position may be the best way to fix that discrepancy.

How to hit down on the golf ball?

In order to hit down on the ball, you need the low point of your swing to happen after you make contact. To put it another way, the goal is to hit the ball before you hit the turf. And correct ball position is the simplest way to make sure the low point of your golf swing happens at the right time.

What does the ball position tell you about your golf posture?

Your ball position for irons tells you something about your golf posture for irons . . . and vice versa. Here’s what I mean by that. Just because your ball is in the center of your stance, that doesn’t mean it’s centered in your body. You might tilt your upper body toward the target, away from the target, or not at all.

How to position a golf ball in relation to your feet?

If you’re using a Rimer, finding the center is easy. Just position the slider in the center of the ruler. Then position your feet at either end of the Rimer and align the golf ball with the slider.

How many checkpoints should a golf ball have?

While this is an important aspect of ball placement, it’s not the only part of your setup you need to examine. You should actually have three checkpoints.

What does it mean when your golf ball is too far forward?

This is another indicator of incorrect golf ball position. The fix for this one is fairly easy. If you keep aiming too far left, or “open,” it means the ball is too far forward in your stance. (This assumes you’re right handed. If you’re a lefty, “open” means the ball aims too far to the right.

What does it mean when your ball is open?

If you’re a lefty, “open” means the ball aims too far to the right. The cause is the same; your ball is too far forward.) On the other hand, if your aim is regularly too far to the right, or “closed,” the ball is too far back in your stance.

Where should a short iron be placed in golf?

When using a short iron, make sure the ball is positioned in the center of your golf stance. In other words, it should be centered between your feet.

Where should the golf ball be centered?

As for the golf ball’s position in relation to your body, you want the ball to line up with one of the following: The inner corner of your lead eye. The buttons or zipper on your golf shirt. Slightly forward of your nose.

How does the club head change direction?

Think of the shape your club head makes as you swing through the golf ball. As you move through the transition at the top of your swing , towards the ball , the club head is traveling at a downward angle. At some point (more specifically, at the low point), your club head changes direction.

What irons are considered long irons?

First, make sure you know which irons are considered “long” and which are “short.”. Your long irons (2, 3 and 4) have a lower loft and are designed for more distance. (1 irons if you have them) Short irons (8, 9 and pitching wedge) have a higher loft and help you pop the ball up in the air as you get closer to the green.

How to hit down on a golf ball?

To Hit Down on the Golf Ball: At setup, position the ball in the center of your stance. Shift your hands toward the target just slightly so the club is in front of the club head. In the transition, think about pulling on the club with your lead hand instead of throwing the club out and down with the trail hand.

What is the goal of an iron shot?

For an iron shot, however, the goal is to hit down on the golf ball. Another way to say this is that your moment of impact should occur before the low point of your golf swing. It’s important to make this distinction when discussing how to hit irons because this whole down/up thing trips up a lot of golfers.

How to avoid steepness when swinging a long iron?

However, you don’t want your angle of attack to be as steep as it is when you’re hitting a short iron. In order to avoid that steepness, position the ball just slightly forward of center.

Where do you use irons in golf?

We use irons all over the golf course, from the tee to the edge of the green , but so many of us struggle to hit them with any consistency.

Where should your hands be when setting up for an iron shot?

As a general rule, your hands should be in line with your inner groin or there or thereabouts when you’re setting up for an iron shot.

How to hit irons correctly?

To hit your irons correctly, the most important skill to master is to hit down on the ball. This means your clubhead should be traveling at a downward angle toward the ball, which is to say the moment of impact should happen before the lowest point of your swing.

How to get out of a rut in golf?

Going back to the basic s and redressing your stance and ball positioning will help you out of a rut and hopefully get you back to playing some beautiful golf shots!

How to correct a swing when hitting irons?

Correct this by addressing the ball at the center of your stance.

How to hit solid iron shots on downswing?

To hit solid iron shots on your downswing you must regulate your swing to be as consistent as possible. It’s vitally important that you hit down with irons, as this creates the required trajectory of the ball at the point of release.

What is the best hand position for spinning the ball backwards?

For those of you at a slightly more advanced level of the game, a forward hand position is crucial for spinning the ball backward, which is handy when making a mid-long approach into a tricky green.

What angle should your toes be on a golf swing?

Your toes should be pointing out on a slight angle at address, perhaps around 70 degrees. This gives you a solid base to swing around and make a good turn in the golf swing. Feet pointed straight ahead makes it more difficult for your shoulders and hips to rotate during the backswing.

What position should your head be when setting up a golf ball?

At set up the head should be pointing behind the golf ball at a slight angle away from the target. (see image right at the top).

What is the right elbow pit?

In particular, the position of the right elbow pit ( right-hander) is crucial to getting a proper golf swing takeaway leading to a solid, consistent golf swing. Where most golfers go wrong is they have the right elbow pit facing towards the target at set up. This is incorrect.

What is axis tilt in golf?

Axis tilt is the amount of sideways movement your body moves when you're in the set up position at address.

Why can't a golf club go anywhere else?

It’s impossible for the club to go anywhere else because of the biomechanical function of the elbow.

What happens if you get your head in front of the golf ball too early?

If the head ever gets in front of the golf ball too early it forces you to hang back and try to scoop the golf ball leading to a lot of weaker, inconsistent golf shots.

How far apart should your feet be?

Your feet should be approximately shoulder-width apart at address and not too wide or too narrow which affects your balance. It's not a perfect distance, but enough to give you a great reference point of how far to move your feet.

Where is the sweet spot on a golf ball?

With the ball teed up just above the blades of grass, you are in position to connect the clubface with the ball directly on the sweet spot . This spot is usually lower on the face and directly in the center, so make sure at address you set the ball up in this position.

What tee to use with a driver?

1. Low tee. Tees that you use with a driver or 3-wood are usually relatively long in order to get the ball teed up higher, but when hitting with an iron from the tee box, you should use a shorter tee. It’s not a requirement but using a short tee will make it easier to tee the ball at the correct height, typically lifting ...

How to make a good par 3?

Smooth tempo. Make sure you have the correct club, trust the number and make a good swing with smooth tempo. Remember not to try to do too much with the swing and focus on smooth tempo for a balanced finish. If you can put it all together, you’ll be in perfect position to stick it close on the par-3s. 1.

Do you need an iron on a par 3?

If you are playing from the correct tee box, most par-3s you encounter should leave you with an iron into the green. There are times when a hybrid or even fairway wood will be required, but for the most part, you’ll be hitting irons off these tees. For this reason, you need to learn how to hit irons off the tee.

image
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9