The battery may be having problems producing enough power when you press the pedal. There could be a fault in the high current circuit. You can use a schematic to ensure everything is correctly connected. The voltage between M- and B- terminals on the E-Z-Go cart control should show 0 or higher. The contacts on your solenoid could be failing.
Full Answer
Why won’t my EZGO golf cart start?
EZGO golf carts may not start due to a transmission problem, corroded battery terminals or a faulty wiring coming from the ignition. Why a EZGO won’t start:
How does an EZ Go Starter work?
E-Z-Go gas cart Starter/Generator and Voltage Regulator When the solenoid is energized through the logic switches (Key Switch and Accelerator Switch), current flows from B+ through the solenoid, to F2 of the Starter/Generator, though the field winding to F1, through the strap, to A2, through the armature to A1 to ground.
How does a starter generator work on a golf cart?
The starter generator is an electric motor that runs on the voltage drawn from the cart’s battery. After igniting and cranking the engine, when the starter generator is spinning at over 1200rpm, it starts converting the AC it produces to DC to regenerate the battery.
How to fix a golf cart battery that won’t start?
Start checking the battery by twisting the battery connector back and forth and then try and start the golf cart. If the golf cart almost starts or starts successfully then it’s highly likely that the battery terminals are corroded.
How do you test a starter generator on an ezgo golf cart?
0:011:03How to Check the Generator on Your Golf Cart - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd you should see the voltage jump up from around 12 volts with the cart running to about 16 voltsMoreAnd you should see the voltage jump up from around 12 volts with the cart running to about 16 volts that that happens that proves the generator is fine you simply need to change.
Why does my gas golf cart have no power?
The main reason for EZGO gas golf cart having no power is the problem in the battery, electrical circuit, including spark plug or ignition key problems. First, check the battery with a voltmeter. If the readings in the voltmeter are ok, then the battery is running without any fault.
How does EZGO starter generator work?
The starter generator works in two ways; the starter portion cranks the engine and the generator portion recharges the battery. When the gas pedal is depressed the starter cranks the engine over. When it begins to run on its own, the generator portion of the unit begins to charge the 12-volt battery.
How do I test my EZGO igniter?
Take the voltmeter's black and red probe and place it on the –ve and +ve terminal of the coil. Take the readings. It should be between 3.7-5.2 ohms. If outside the range, the coil should be replaced.
Why does my golf cart not have any power?
If you're lucky, the problem could be as simple as a loose wire or a broken coil. In some cases, corrosion can also be a factor. If you suspect a faulty solenoid, your best bet is to take your cart to a repair shop. A mechanic can diagnose the problem and replace the solenoid if necessary.
What makes a gas golf cart start?
In a car, the engine starts when you turn the key, and it keeps running until you switch the ignition off. In a gasoline-powered golf cart, the engine starts when you step on the gas pedal, and it shuts off when you take your foot off the gas.
How do you jumpstart a starter generator?
0:443:36Starter Generator Field testing - YouTubeYouTubeStart of suggested clipEnd of suggested clipWith your cable. Just tap it onto it or if you're like mine you have a switch I would clamp it firstMoreWith your cable. Just tap it onto it or if you're like mine you have a switch I would clamp it first then use the switch. So you don't arc on your stud right here and burn up your threads.
How do I test my starter generator not charging?
To check if the starter generator is causing the battery charging issue in your EZ-GO golf cart, all you've got to do is short the green wire to ground. Remember, you need to short the wire and not the terminal itself. After doing that, apply a full field current at the battery terminal.
How do you polarize a starter generator on a golf cart?
0:391:10How to Polarize at the Generator - YouTubeYouTubeStart of suggested clipEnd of suggested clipTake your live jumper lead and touch it touch touch. You're going to get a small spark. When that'sMoreTake your live jumper lead and touch it touch touch. You're going to get a small spark. When that's happened that's the end of it lay. Your field wire back on where she belongs. And the job is done.
What does ezgo ignitor do?
EZGO Ignition Switch, Ignitor, Coil Parts Ignition coils transfer voltage from your battery into spark for your engine to fire. We carry ignition coils for EZGO TXT, RXV, Marathon, and ST350 Workhorse golf cart models.
How do you bypass a solenoid on a golf cart?
Bypassing Golf Cart Solenoid Method If you do decide to bypass the solenoid, this is what you need to do: Take the two larger wires that connect to the solenoid and connect them directly (keeping all safety precautions in place). This should do the trick and if it does not work then the solenoid is not the problem.
How does a golf cart ignitor work?
The ignitor boosts the signal and sends it to the ignition coil. The coil then creates the large spark that goes to the spark plug and fires the gas mixture in the cylinder. Ignitors can be the cause of a weak spark or they may fail completely and then the coil cannot create any spark at all.
Why is my golf cart generator not charging?
If your starter generator is not charging properly, it may be that the solenoid, voltage regulator or brushes are faulty. If you’ve ensured that all of these parts are working fine, the starter generator may not be drawing enough current to regenerate the battery.
What is a golf cart starter?
A golf cart starter primarily serves two functions; turning over the engine to start the cart and act as a key link in getting the battery charged. The starter has enough current to crank the engine. The generator converts the alternating current to direct current and recharges the battery.
What to do if your starter generator is not energized?
Check Solenoid. The solenoid is expected to remain energized at all times. If it is not energized at any point in time, the return path for the starter generator to charge the battery via the voltage regulator won’t be completed .
What to check for when starter generator fails?
Wires are the first thing to check for in the case of an starter generator failure. Any loose or damaged wire is enough to prevent the cart from working completely. To ensure the starter generator is charging the battery as intended, check all the terminal connections.
What is a starter generator?
The starter generator is an electric motor that runs on the voltage drawn from the cart’s battery. After igniting and cranking the engine, when the starter generator is spinning at over 1200rpm, it starts converting the AC it produces to DC to regenerate the battery.
How many volts does a Yamaha G1 generator have?
The only difference is the wiring setup which can be found in the user manual. The ideal voltage output from the starter generator in these carts is around 14-15 volts.
Can a starter generator charge a golf cart?
In most of the cases, a starter-generator that can start the cart will also be able to charge the battery. This is because of the configuration of EZGO Golf carts.
Why won't my EZGO golf cart start?
EZGO golf carts may not start due to a transmission problem, corroded battery terminals or a faulty wiring coming from the ignition. Transmission Problem For safety reasons, many EZGO golf carts won’t start if its transmission is not in the Park position. Check and make sure the gear is in the Park position.
Why won't my EZGO RXV move?
Brake Problems: Many times the reason your RXV won’t move is because of brake problems. The RXV is designed to be disabled when there is a problem with the break. Many times, the wiring that connects the brakes to the controller gets loose or is damaged. This can disable your EZGO RXV.
Why does my golf cart make a clicking noise?
When you press your golf cart pedal you should hear a clicking noise, if you don’t hear a clicking noise there might be a problem with the solenoid. To make sure your solenoid is functioning properly check it with a voltmeter. If you hear a click then you need to check its power with the voltmeter.
Why is my golf cart ignitor failing?
The most common reason for a failed ignitor is a bad voltage regulator. Therefore, when you replace or fix the ignitor on your golf cart, make sure you also check the voltage regulator and see if it needs to be replaced. There have also been cases where the battery has switch polarity for some reason.
How to check if golf cart battery is corroded?
Also, make sure the golf cart is turned off. Start checking the battery by twisting the battery connector back and forth and then try and start the golf cart. If the golf cart almost starts or starts successfully then it’s highly likely that the battery terminals are corroded.
What to do if replacing ignition wire doesn't work?
To check the continuity of the ignition wire you’ll need to use an ohmmeter or a continuity tester. To do this, set the switch to off and set your ohmmeter to X1.
Do E-Z-Go Golf Carts have titles?
E-Z-Go Golf Carts, unlike vehicles, do not have a title, but they do have serial numbers. If you are buying a golf cart, it is essential to check the serial number to ensure you do not buy a stolen one. Each E-Z-Go Golf cart has a unique serial number that you can use to identify your golf cart.
Where is the E-Z-Go Cart Serial Number
As mentioned above, all E-Z-Go Golf carts have unique serial numbers. These numbers are essential when buying replacement parts for your golf cart. Textron Specialized Vehicles has been building golf carts for a long time, and the serial numbers are placed on different parts of the golf carts.
How do I push my E-Z-Go Golf Cart?
It can be frustrating when your battery is flat and your golf cart will not roll. To push it to the nearest charging or gas station, you need to release the motor brake. Follow these easy steps to do that.
Why does my E-Z-Go golf cart not move
There are several reasons why your cart refuses to move, but you should check the battery before anything else. If the battery is charged, here are some other reasons why your golf cart will not move.
Are all E-Z-Go Golf carts electric?
No, there are both electric and gas-powered E-Z-Go Golf carts available. Bear in mind that there are several models you can drive on the street, but those are all-electric. These electric models run on batteries that you have to charge at least every 24 hours, depending on how much you use them.
How to tell the Assembly year of my E-Z-Go golf cart
The placement of serial numbers is discussed above, and you will find the manufacturer’s number right next to it. The manufacturer’s number consists of one letter and 3 or 4 numbers. The last two numbers indicate the last two digits of the year of assembly.
How to service E-Z-Go Golf Cart
Like all vehicles, E-Z-Go golf carts require regular maintenance to enhance longevity and performance. You should ensure that your golf cart is serviced after every six months of use. That will ensure that you spot problems and repair them early, which will help reduce repair costs. Here are essential guidelines for E-Z-Go golf cart maintenance.