What are steelfiber golf shafts?
At the core of the SteelFiber shaft is filament-wound carbon fiber. The filament winding process yields a seamless and incredibly uniform bending golf shaft.
What's the difference between steel and carbon fiber golf clubs?
Not to mention steel is typically heavier than carbon fiber. A non-steel product can also assist in launching the ball higher and increasing clubhead speed and spin — three things the average golfer struggles with on a regular basis.
Should you choose steel or graphite shafts for your golf clubs?
There used to be a basic rule for iron shafts – if you’re a strong, competitive player you choose steel, and if you’re older, slower, a woman, or generally not athletic, you choose graphite. Steel shafts were always known as exceptionally consistent while graphite was unpredictable and overly light and flexible.
What are golf shafts made of?
Shafts for golf clubs are primarily made of either steel or graphite. Steel golf shafts are made from a carbon steel alloy and protective chrome plating is applied to prevent it from rusting. Graphite golf shafts can also be called a composite shaft because it made from multiple layers of carbon fiber and epoxy resin holding the layers together.
How long do steel golf shafts last?
Again, you'll want to invest in irons with steel shafts rather than graphite shafts. A good rule of thumb to follow is if you're a golfer with a low handicap or just a casual golfer is to replace your golf irons somewhere around every four to five years or after around three hundred rounds.
How good are steel fiber shafts?
High performance graphite with the familiar feel of steel make SteelFiber a great all-around shaft. The multi-layer construction delivers more performance, more forgiveness, and more consistency. The constant weight design ensures that players get a full iron and wedge set that is more balanced.
What pros use steel fiber shafts?
SteelFiber shafts are famously used by Brandt Snedeker, Matt Kuchar and Fred Couples, to name a few. The lone knock was that, for some players, the flex profile was too strong.
Are steel fiber shafts steel or graphite?
Players no longer need to decide between 100% graphite or 100% steel; SteelFiber combines the power of graphite AND the stability of steel.
Do SteelFiber shafts play stiffer?
In short: Steelfiber shafts can be very stiff even with little weight, but pure graphite shafts can also be very stiff.
Is SteelFiber a graphite?
SteelFiber shafts come in many weights and are the only graphite iron shafts to feature Aerotech's unique SteelFiber technology–combing the power of graphite with the stability of steel.
Are steel shafts better than graphite?
Typically, steel shafts are much heavier, more durable and are generally less expensive than their graphite counterparts. They are more often than not made from stainless steel and they tend to weigh in between around 90g-120g. Torque or lateral twisting found in all graphite shafts is lower in steel irons.
Can I replace my steel shafts with graphite?
On golf clubs that are not forged, light work will still be included, but you can replace the steel shafts with graphite. You will have to heat the clubhead and remove it, and you may have to buy a new grip. It's a little involved, but completely doable.
Do most pro golfers use steel or graphite shafts?
As discussed previously, most professional players use steel shafts in their irons because of their consistency. Accuracy with irons is key for pro players. When it comes to driver shaft and fairway wood selection, graphite is often the shaft of choice, even for pros.
Who uses Aerotech golf shafts?
Every week on the PGA Tour, about 70 percent of the players in the field use True Temper steel shafts in their irons. The company's Dynamic Gold models that dominate the counts are used by Tiger Woods, Justin Thomas, Brooks Koepka and a host of others.
What is carbon fiber shaft made of?
The material is wound around the mandrel much like thread is wound on a spool. Other carbon fiber shafts are made of sheet of material wrapped around the mandrel. That can create seams, which can create radial stiffness differences around the shaft. The radial consistency of the filament wound Aerotech Steelfiber review samples measured averaged.
What is Matt Kuchar's steel fiber shaft?
When Matt Kuchar started playing and winning with Aerotech Steel Fiber iron shafts, the brand became better known. The SteelFiber constant weight taper tip model is the most popular of the Aerotech iron shafts.
Is Aerotech steel shaft higher than steel?
The torque is slightly higher than steel, but certainly in range for tour grade iron shafts. Aerotech SteelFibre shafts have a stainless wire wrapped over a filament wound graphite core, combining the properties of steel and graphite into the shaft. The construction of the ‘wire’, 1/10 the diameter of a human hair is illustrated here.
Does Aerotech have carbon fiber?
The combination of carbon fiber and a stainless steel wire wrap does virtually eliminates ovaling in the Aerotech SteelFiber iron shafts, even in the 80 gram version. Perhaps more significant, Aerotech is one of the few, if not the only company, filament winding carbon fiber shafts. The material is wound around the mandrel much like thread is wound ...
What shafts are used in PGA Tour driving irons?
In fact, a number of PGA Tour professionals are now using composite shafts in their driving irons, and some, like Brandt Snedeker, Matt Kuchar, and Fred Couples, are playing composite shafts in their standard irons. With all the different options, choosing the right iron shafts can be difficult. So how do you know if you should choose steel ...
Can you go back to steel after switching to graphite?
But he also finds that most get used to the new sensation very quickly and almost none go back to steel once they’ve become accustomed to graphite.
Does steel have a lot of vibration?
You prefer a smoother feel: As previously mentioned, steel transmits a lot more vibration to the body, which can contribute to injury. However, those vibrations are also called “feedback,” and some players absolutely need that for control of not only distance but also the clubhead itself.
Is steel shaft lighter than graphite?
Steel shafts are now offered in lighter weights than ever before but not as light as graphite and not as varied in the flex profiles available. Steel tends to have very low torque (rotation during the swing) and also a stiffer tip section, while graphite can offer much higher torque rates and more flex in the tip.
Is graphite or steel more consistent?
Steel shafts were always known as exceptionally consistent while graphite was unpredictable and overly light and flexible. In truth, many of these generalizations were actually somewhat accurate, as graphite shafts were a work in progress for quite awhile.
Feedback
I have not tried them but have heard great things about them. The owner of Scratch Golf is a fairly regular poster here (fairwayfred) has them and he swears by these shafts. I think B. Snedeker also plays them.
Feedback
Good to see you're researching this so well...... i80 in R flex. 6i swingspeed is 82-83mph. I transitioned from KBS Tour R flex so even then there's quite a weight difference. In my mind, the total weight difference between i80s and KBS Tours at 120g is very substantial. In my case, the KBS Tour in R flex was the last steel shaft I played.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Chuck7070
Looking at getting a new set of irons. Just wondering is it’s the worth the money to put steelfiber shafts in them.
PlaidJacket
I have them in each of my irons. Mine are i80-R. I've been playing these shafts in my Wishon 771csi irons for about 4 years. First non steel shafts I've ever play in irons. I love the feel and I attribute that to the combination of the shafts and the custom build of my irons.
PMookie
I had them in my Z545 irons and I really liked the feel. Dispersion wasn’t great with them, but I also “fitted” myself for them. If you find the correct weight and stiffness, and they’re better performance-wise than what you’re playing now, they’re definitely worth the money. Sent from my iPhone using Tapatalk Pro
hckymeyer
This is gonna sound cliche, but the only way they are worth the money is if they are the right fit for you. Are they a quality shaft? Absolutely, well made and offer a great performance and feel for the right person. So do a lot of other shafts though.
revkev
This is gonna sound cliche, but the only way they are worth the money is if they are the right fit for you. Are they a quality shaft? Absolutely, well made and offer a great performance and feel for the right person. So do a lot of other shafts though. They could be $5 a shaft but if they make you shoot higher scores then they aren't worth it.
therod
I don't play the SteelFiber but I play the Xcaliber version, the TourX. I've had some tendon issues in my elbows so I needed to do something to get some relief. And to me, they're worth every penny. Great feel, great performance, and relief for my elbows.
Rtracymog
Anything is worth the money if it helps. There’s just a cost to improvement ratio. I love the OBAN steel shafts, but I don’t see them being $50 per club better than my C-Tapers. They will help, but for how much I play, I can’t justify it. Sent from my iPhone using MyGolfSpy
What is the difference between a golf shaft and a steel shaft?
Shafts for golf clubs are primarily made of either steel or graphite. Steel golf shafts are made from a carbon steel alloy and protective chrome plating is applied to prevent it from rusting.
What are steel shafts made of?
Steel shafts are made from a single material, so creating a new model is limited to geometry changes to the shaft such as the outside diameters along its’ entire length, wall thickness, distance between each step (unless it is a stepless shaft) and usage of additional metals (such as chromium, vanadium and nickel) in the alloys.
Why are graphite shafts better than steel shafts?
Since the graphite shafts are generally lighter than steel shafts, there is a potential for greater distance because they may be able to be swung slightly faster. Most graphite shafted clubs are assembled longer in length than standard steel-shafted clubs.
Why use steel wedges in golf?
The other reason why golfers choose steel in their irons and wedges is for control rather than increasing distance , especially among stronger individuals. However, there are a number of quality graphite iron shafts that come in all different weights and stiffness to match virtually any golfer.
What is the advantage of graphite shafts over steel?
Another advantage of graphite shafts over steel is from a design standpoint. As earlier stated, graphite shafts are manufactured from multiple layers of carbon fiber. Each layer can be a different modulus (strength) material and can be applied at different angles to contribute independently to the stiffness or reduction in twisting along ...
How much does a graphite golf shaft cost?
An inexpensive graphite shaft may cost $10.00, while the most expensive shaft can cost as much as $1000.00! Although most graphite shafts normally found in $10 – $100 range.
What is graphite shaft?
Graphite golf shafts can also be called a composite shaft because it made from multiple layers of carbon fiber and epoxy resin holding the layers together. There are even some shafts made of both steel and graphite.
