List of disc golf brands and manufacturers
| Brands | Est. | Based in | Country of manufacture | Country of manufacture |
| Discs | Baskets | Bags | Carts | |
| Axiom | 2014 | Michigan | ||
| Crosslap | 2011 | Germany | ||
| Daredevil Discs | 2002 | Canada | No |
What are disc discs made of?
Most disc golf discs are made out of polypropylene plastic, otherwise known as polypropene, which is a thermoplastic polymer resin used in a wide variety of applications. Discs are also made using a variety of other plastic types that are heated and molded into individual discs. That plastic starts as millions of tiny pieces (like the picture below).
What are the different types of disc golf discs?
Oct 12, 2018 · What are Disc Golf Discs Made of? With the advent of commercialization since the 1950s, the primary material for discs is plastic, i.e., .polyethylene. Sometimes, other materials have been tried but failed. Some additional chemicals are …
How are golf discs decorated?
Usually disc golf discs are made from thermoplastic, thermosets or elastomers. But since the middle 1990s over 18,000 different materials have been used to make a disc golf disc. This is because designers are always looking to fine tune the discs and give them greater distance, stability and grip control.
How many holes in a disc golf round?
Mar 17, 2022 · Disc golf discs are made by melting down plastic, injecting the plastic into a mold, and then cooling it until it hardens. Latitude 64 put out a video that shows the process (and features some funky drums) in 2019. Check it out:
What kind of plastic are disc golf discs made of?
polypropeneBut now, in the modern era of the sport, a disc is usually made out of a certain type of plastic called polypropene. Polypropene is a thermoplastic resin that has the ability to soften into a liquid when being heated and becomes hard again when cooled.Jan 2, 2022
What plastic do pro disc golfers use?
KC Pro. Our KC Pro plastic was developed for the demanding needs of 12 time World Disc Golf Champion Ken Climo. This plastic is the favorite putter and midrange plastic of many pros who would also like to be world champions.
How are disc golfs made?
0:002:18How a Disc Golf Disc is made - YouTubeYouTubeStart of suggested clipEnd of suggested clipAfter the drying. Process comes the color blend. Either one or two containers being used two whenMoreAfter the drying. Process comes the color blend. Either one or two containers being used two when getting our burst.
Is DX plastic good?
While DX plastic is affordable, they get broken in very fast. The price can be nice for replacing as well. However Champion and Star plastic is more expensive and holds up better too, however replacing them can get spendy if lost.Jun 24, 2010
What plastic does Paul McBeth use?
The Luna is a new putter co-designed from start to finish with Paul McBeth. The Luna features a new and unique plastic blend, combining the fan favorites of Jawbreaker and the durability and extra tackiness of rubber....Disc and foil color may vary.MODELLunaTypeInventory2 more rows•Mar 29, 2019
Is Halo plastic different than star?
Halo Star is a decorative blend of Star plastic featuring a colorful halo design where the rim is a distinctly different color than the center plate of the disc....Halo Star Details.ElementSoftness6Grip61 more row
How do you make a mold for disc golf?
0:569:52Making a Disc Golf Disc | How It's (Hand)Made - YouTubeYouTubeStart of suggested clipEnd of suggested clipForm is that plastic goes in is melted. And then pushed through into a mold. So after everythingMoreForm is that plastic goes in is melted. And then pushed through into a mold. So after everything heats up i'll add plastic it'll melt i'll attach the mold to the bottom of the barrel.
What are disc molds?
0:041:14What does disc mold refer to? - YouTubeYouTubeStart of suggested clipEnd of suggested clipAny type any plastic type of the same disc.MoreAny type any plastic type of the same disc.
Why did Vibram stop making discs?
We have made the very hard decision to exit the sport of disc golf. We feel that the sport of disc golf deserves more attention and effort than our business is able to provide, given the volume of resources needed for the much larger segments of our business.Feb 21, 2018
Do pros throw DX plastic?
Lots of popular, older molds were originally designed for DX. Hence they don't fly as well in a more premium plastics. DX discs have more glide as compared to a more premium counterpart. There is an anecdote on here somewhere that one pro doesn't throw DX Teebirds because they are too long - he always overshoots.Feb 6, 2013
Do disc golf discs wear out?
Given normal wear and tear on a disc from the average player, I feel confident saying that a disc could potentially last throughout the duration of a player's career. In my experience, this will depend on three main factors: Type of plastic the disc is made from. Types of courses you typically play on.
How do I make my disc golf discs glow?
UV flashlights are a must for glow disc golf. It only takes seconds to charge glowing discs or stickers, and they shine brightly for several minutes. Then, after you've thrown your disc, the UV flashlight makes finding them in the pitch black of night even easier than it is during the day!Oct 7, 2020
What is disc golf made of?
But now, in the modern era of the sport, a disc is usually made out of a certain type of plastic called polypropene. Polypropene is a thermoplastic resin that has the ability to soften into a liquid when being heated and becomes hard again when being cooled.
What is the best material for disc golf?
Other manufacturers may have other disc golf material but thermoplastic resins are the most prominent in the industry due to the different benefits it offers. For one, this type of plastic has a special reshaping ability, stability, and high-impact resistance.
What is polypropene disc?
Polypropene is a thermoplastic resin that has the ability to soften into a liquid when being heated and becomes hard again when being cooled. These type of disc golf plastics also has the ability to be molded into a variety of shapes making it a perfect material for disc golf discs making process.
How long does it take for a disc golf disc to contract?
The disc will then be put on a ventilated surface for about 10 minutes. This is the time where the plastics will now contract and will get its disc golf discs shapes.
What is the result of disc gold discs?
The result is the plastic formed into a disc gold discs. But before the actual process, it is important to note that the manufacturer first needs to come up and design a disc mold. This is where the different plastic materials are inserted to form a disc golf discs.
Is frisbee the same as disc golf?
The sport of frisbee and disc golf will always be related to each other. The fact that there are some sports enthusiasts that often mistaken that discs from disc golf and frisbee are exactly the same makes the two sports share similar properties.
Is disc golf a part of disc golf?
The disc is an integral part of disc golf and as a practitioner, it is just right that you are familiar with how disc golf discs are made. Hope that this article provides a lot of information on the most important equipment for disc golf. As a practitioner, it is important for you to at least know the process as the disc contributes heavily when you when or lose in the game.
What is Disc Golf?
Disc golf was primarily known as ‘Tin lid golf’ which is basically a disc flying sport. The game was first invented at the beginning of the 19th century and was at first played in 1926 in Canada. The methodology of playing this game is quite similar to that of playing golf.
How to Make a Disc Golf Disc
For making a golf disc, an ultra-speed procedure known as ‘injection molding’ is adopted. The main principle of this procedure is taking a liquid plastic ingredient into a sealed mold that is generally of the multi-hollow type. The liquid plastic is refrigerated to a solid form just after being poured into the mold.
What are Disc Golf Discs Made of?
With the advent of commercialization since the 1950s, the primary material for discs is plastic, i.e., .polyethylene. Sometimes, other materials have been tried but failed. Some additional chemicals are used a bit for speed, durability, stability, and design. The ingredients or raw materials used in making disc golf discs are not very diverse.
How Disc Golf Discs Are Made (Step-by-Step Guide)
Disc golf disc is getting popularity as a game and pastime all over the world. During the initial stage, it was easy and straightforward to some extent to produce discs. Time has changed a lot. there are so many professional championships that are held worldwide.
Frequently Asked Questions
Answer: The temperature ranges between 320 degrees to 450 degrees Celsius.
Conclusion
So, this is our detailed guide on how disc golf discs are made. I have provided a summary of the complete making process in this article. As you can see, producing golf discs is not as easy as it may seem. The making process includes a lot of quality raw materials, well-functioned machines, skilled workers who have patience and a sense of timing.
What is disc golf?
Disc golf is a flying disc sport in which players throw a disc at a target; it is played using rules similar to golf. Most disc golf discs are made out of polypropylene plastic, otherwise known as polypropene, which is a thermoplastic polymer resin used in a wide variety of applications. Discs are also made using a variety ...
When was disc golf invented?
Disc golf was first invented in the early 1900s. The first game was held in Bladworth, Saskatchewan, Canada in 1927. Ronald Franklin Gibson and a group of his Bladworth Elementary School buddies played a game of throwing tin lids into 4-foot wide circles drawn into sandy patches on their school grounds. They called the game Tin Lid Golf and played on a fairly regular basis. However, after they grew older and went their separate ways, the game came to an end. It was not until the 1970s that modern disc golf would be introduced to Canadians at the Canadian Open Frisbee Championships in Toronto and Vancouver, BC.
What is a disc golf tee box?
A disc golf tee (commonly referred to as a tee box or the box) is the starting position of a hole. The PDGA recommends that the tee box be no smaller than 1.2 meters wide by 3 meters long. The tee box is usually a pad of concrete, asphalt, rubber, gravel, or artificial turf. Some courses have natural turf with only the front of the tee position marked or no tee boxes at all and players begin from a general location based on the course layout.
What was the first disc golf target?
Ed Headrick's Flying Disc Entrapment Device Patent 4039189. The first disc golf target made with chains that became the standard for disc golf. In 1977, Headrick and his son Ken developed the modern basket catch for disc golf, US Patent 4,039,189, [4] titled Flying Disc Entrapment Device, which they trademarked "Disc Pole Hole". The Disc Pole Hole created a standardized catching device that had a chain-hanger that held vertical hanging rows of chain out and away from a center pole. The vertical rows of chain came together forming a parabolic shape above and angling down towards a metal basket that attached to and surrounded the center pole, and could catch a disc from all directions.
How many holes are there in disc golf?
Disc golf courses. Most disc golf courses have 9 or 18 holes, and exceptions most often have holes in multiples of three. Courses with 6, 12, 21, 24 or 27 holes are not uncommon. The PDGA recommends that courses average 200–400 ft (61–122 m) per hole, with holes no shorter than 100 ft (30 m).
What is the most common type of target in disc golf?
Targets. A disc resting in a basket, the most common type of target. Main article: Basket (disc golf) Although early courses were played using trees, fence posts, or park equipment as the target, standard disc golf baskets are by far the most common type of target on modern courses.
How many disc golf courses are there in the world?
There are disc golf courses on every continent, including 24 in Latin America, 8 in Africa, and one in Antarctica. The Åland Islands have been defined as the world's largest single disc golf park, with one course in each of the 16 municipalities of Åland. Country. DGC.
What are disc golf discs made of?
Usually disc golf discs are made from thermoplastic, thermosets or elastomers. But since the middle 1990s over 18,000 different materials have been used to make a disc golf disc. This is because designers are always looking to fine tune the discs and give them greater distance, stability and grip control.
How to make disc golf discs?
What happens in this process can easily be explained. First, plastic materials need to be melted down and turned into a liquid. Second, once this is done, the liquid plastic is taken through a process that removes excess moisture and any metal impurities.
What is silk screening disc golf?
If different colors are needed, a silk screening process is another option. It can be used to add the graphics to the disc when multiple colors are required. After the disc golf discs have successfully completed this process, they are then packaged and shipped to the different retail and wholesale outlets.
How does technology play a role in disc golf?
First, computers are used to design a model. Then a machine is used to produce a prototype. When that is done, a wind tunnel or other technological equipment test the prototype.
What is the most common material used for frisbees?
The Frisbee construction material that has been used most often is polyethylene. It is the most used thermoplastic material used throughout the world since the 1950s. Manufacturers make polyethylene out of a colorless flammable gas called ethylene.
What is the most popular method to add graphics to a disc?
Three methods are used to add all the graphics and other data to the discs. One option, and it is the most popular one to use, is the hot imprinting method. This is where dried ink is transferred to another surface through pressure and and high temperatures.
Is a disc made the same?
All discs are not made the same and these construction processes, as well as their design, influence how far the disc will go, if it curves just right and is stable throughout its flight. The best construction process is the injection mold system.
What is the best putter disc?
The Innova Aviar discs are the most popular putters on the market because of reliability and dependability. It’s a really solid putter and decent for short approach shots. If you use this disc as a practice disc, it will help you improve your game tremendously and help you throw your disc straighter.
What is the Buzzz disc?
The Buzzz is infamous in the disc golf world and has a reputation of being an easy to throw disc with a history of ace runs. I didn’t really like the Buzzz when I first started playing with it, but it has definitely grown on me. With its sticky grip, and beadless rim, it’s one of my three go-to mid-range discs.
Is the Valk a good disc?
The Valk is a fantastic and extremely well-balanced disc. For those who are seasoned, this former distance champion can help them get a ton of distance on their throws. The Valk is a straight up beast when it comes to turnover shots. Turnover shots and rollers come easy for those who know how to use this disc properly.
Is the River disc good for beginners?
Advanced players love the accuracy and consistency. The River is a really good choice for beginners because of the low speed, superior glide, good understable turn, and small amount of fade. This disc will get you easy distance if you don’t quite have the arm for a high speed disc.
The Materials Needed to Make A Disc Golf Disc
The Disc Golf Discs Making Process – Injection Moulding
- Since we already know the materials used in the process of making a disc, it is now time to familiarize the process of injection molding. To make you fully understand the process, I will make it as simple as possible to the readers. When a plastic is subjected to injection molding, it will form different chemical bonds called polymers. These different bonds involve different types of …
Disc Golf Discs vs Frisbees
- The sport of frisbee and disc golf will always be related to each other. The fact that there are some sports enthusiasts that often mistaken that a disc and a frisbee are exactly the same makes the two sports share similar properties. However, a disc and a frisbee are radically different in appearance and flight characteristics. The disc golf disc which is designed to take flight and cov…
Conclusion
- The disc is an integral part of disc golf and as a practitioner, it is fun to familiarize yourself with how disc golf discs are made. Hopefully this article provides a lot of information on the most important equipment for disc golf.
Overview
Disc golf is a flying disc sport in which players throw a disc at a target; it is played using rules similar to golf. Most disc golf discs are made out of polypropylene plastic, otherwise known as polypropene, which is a thermoplastic polymer resin used in a wide variety of applications. Discs are also made using a variety of other plastic types that are heated and molded into individual discs. The sport …
Origin and early history
Disc golf was first invented in the early 1900s. The first game was held in Bladworth, Saskatchewan, Canada, in 1927. Ronald Franklin Gibson and a group of his Bladworth Elementary School buddies played a game of throwing tin lids into 4-foot wide circles drawn into sandy patches on their school grounds. They called the game Tin Lid Golf and played on a fairly regular basis. However, after they grew older and went their separate ways, the game came to an end. I…
Disc golf courses
Most disc golf courses have 9 or 18 holes, and exceptions most often have holes in multiples of three. Courses with 6, 12, 21, 24 or 27 holes are not uncommon. The PDGA recommends that courses average 200–400 ft (61–122 m) per hole, with holes no shorter than 100 ft (30 m). The longest holes in the world measure more than 1,500 ft (460 m) long. Course designers use trees, b…
Gameplay
The sport of disc golf is set up similar to a game of golf. A "round" is played on a disc golf course consisting of a number of "holes", usually 9 or 18. Each hole includes a tee position for starting play and a disc golf target some distance away, often with obstacles such as trees, hills or bodies of water in between. Players begin by throwing a disc from the tee, without crossing over the front …
Disc types
Disc golf discs are smaller than Ultimateflying discs or general-purpose recreational frisbees. They typically measure 21–22 cm (8.3–8.7 in) in diameter and weigh 130–180 g (4.6–6.3 oz). All PDGA-approved discs measure 21–30 cm (8.3–11.8 in) in diameter and weigh no more than 200 g (7.1 oz). Discs used for disc golf are designed and shaped for control, speed, and accuracy, while g…
Throwing styles
While there are many different grips and styles to throwing the disc, there are two basic throwing techniques: backhand and forehand (or sidearm). These techniques vary in effectiveness under different circumstances. Their understanding and mastery can greatly improve a player's game, and offer diverse options in maneuvering the disc to the basket with greater efficacy. Many players use what is referred to as a run-up during their drive. This is practiced to build more forw…
Scoring
Stroke play is the most common scoring method used in the sport but there are many other forms. These include match play, skins, speed golf and captain's choice, which in disc golf is referred to as "doubles" (not to be confused with partner or team play).
Regardless of which form of play the participants choose, the main objectives of disc golf are conceptually the same as traditional golf in the sense that players follow the same scorekeepin…
Tournaments
Tournaments are held nationwide and year long in the United States. Sanctioned Tournament play is communicated through the Professional Disc Golf AssociationMembership. The PDGA provides international, professional, and amateur disc golf tournaments as well as communicates event results, opinions and other information beneficial to the sport via electronic and printed media. I…