Driver Shaft Length Chart
| Height | Wrist To Floor Measurement | Driver Shaft Length |
| 5′ 0″ – 5′ 2″ | 28.50″ to 33.50″ | 41.5″ |
| 5′ 2″ – 5′ 4″ | 30.00″ to 34.00″ | 42.0″ |
| 5′ 4″ – 5′ 6″ | 30.75″ to 35.25″ | 43.0″ |
| 5′ 6″ – 5′ 8″ | 32.00″ to 37.00″ | 43.5″ |
What is the best golf shaft for a driver?
Best Driver Shafts Review
- Project X New HZRDUS Smoke Black 6.0 60g Driver/Fairway Shaft Stiff Flex. ...
- Mitsubishi Rayon Kuro Kage Black HBP 2nd Gen 50. ...
- Integra New SoooLong Ultralite 45 g Graphite Shaft R/S/A/L Flex. ...
- Fujikura Vista Pro 65 Stiff Shaft + TaylorMade M1/M2/M3/M4 Tip + Grip. ...
- Project X New HZRDUS Smoke 6.0 60g Driver Shaft Stiff Flex w/Taylormade Adapter. ...
What is the Standard Shaft length of a golf driver?
The standard length for a male driver shaft used to be 43.5 inches for a steel shaft and 44 inches for a graphite club. However, in recent times, the standard driver length has been accepted as 45 inches. Typically, the length of a female golfer’s club is an inch lesser than that of a male golfer’s club.
What is the best shaft for a driver?
Selecting The Right Driver Shaft for Fast Club Head Speeds (100+ mph)
- Mitsubishi Rayon Diamana D+. This driver shaft is aimed more at the pricey end of the market, so that may mean it’s not going to be right for you.
- Tensei CK Pro. The Tensei CK Pro is typically around 70g in weight, so while it’s not the lightest on the market, it’s still more towards that end of the ...
- Fujikura Ventus Black. ...
What is the most expensive golf shaft?
Most Expensive Set of Golf Clubs
- The Most Expensive Golf Clubs. ...
- The Honma Five Star Golf Clubs. ...
- Bentley Centenary Set. ...
- A.G. ...
- Andrew Dickson Long Nosed Putter: The Andrew Dickson Long-Nosed Putter, which was once owned by golf collector Jeff B. ...
- Simon Cossar Fruitwood Metal Headed Putter. ...
- Square Toe Light Iron Golf Club. ...
- Golden Putter First Lady Special Edition. ...
What length shaft should my driver be?
The standard length of a driver for men used to be 43.5 inches with a steel shaft and 44 inches for a graphite shaft. However, in the 21st century a standard driver is considered to be 45 inches.
What is standard length for driver?
around 45 inchesStandard, off-the-rack drivers usually check in around 45 inches, while the USGA limits driver length to 48 inches for its competitions.
How long should my golf driver be for my height?
Using the ratio of every 6" of height there should be a 1" change in length then there should be a 1 ½" difference between their 5-irons. For example, recommend 36.5" for the lady and 38" for the man (or 36.75" / 38.25").
Are shorter drivers easier to hit?
It is easier to hit the center of the clubface with a shorter club than a longer club, therefore if you feel like you are struggling with your current driver here's a few things you can try before you cut that driver down or order a new one.
Will a shorter driver help my slice?
The long and the short of it Your current length may be perfect for you. You may even need a longer one. But, as our experts and test have shown, a good number of golfers would benefit from a shorter shaft. You may actually increase distance and there's a good chance you'll hit more fairways.
How do I know my driver length?
To determine your optimum driver length, look at where you hit the ball on the face of your driver. If your hits are mostly towards the heel, your driver is too long. Another possibility is that the shaft is too light. Try choking down on the shaft and see if your contact improves.
What happens if you shorten your driver shaft?
Shortening the shaft will make the club shorter but it will also make the shaft stiffer and adjust the swing weight as well. Plus, the more length you remove, the less flex your club will have. Depending on how much you cut it down, it could move a regular flex to a stiff or a stiff to an extra stiff.
What golf driver shaft is right for me?
Which flex rating you use will depend on the type of swing you have. For example, beginners and those with less powerful swings tend to use a shaft with greater flexibility to propel the ball more. On the other hand, if a player has a high and powerful swing speed, they will require a stiffer shaft with less flex.
Is a 43 inch driver too short?
Tall golfers have found that they're able to play well with a 44 inch driver while shorter players are better off using a 43” driver. There are golfers who have had better control, lesser misses or slices and gained extra distance by about five yards when using a 44” driver when compared to a 43 inch driver.
How do you size a golf driver?
Simply hold your golf club at 45 degrees to the ground or as in your playing position. At this point take a golf club ruler or take measure and place under the sole of the club. Measure to butt of grip. This will give you you an accurate and USGA standard for measuring your golf driver.
What's the Standard Driver Length
The standard driver length for men's clubs is 45.5" to 45.75" inches long. Because women tend to be shorter than men, the standard women's driver length is usually closer to 44".
What Length Driver Do the Best Club Fitters Recommend for Most Golfers?
In our experience getting fitted and what we've gathered talking to and researching what club fitters have to say about driver length, most of the best club fitters recommend drivers very close to the standard length for most golfers.
How Long Are PGA Tour Professionals' Drivers?
PGA Tour Professionals tend to play drivers between 44-46" in length. The vast majority of pros are in the 44.5" to 45.75" range from what we've been able to gather.
How Long Should Your Driver Be?
As we mentioned at the start of this article, the best driver for you has the optimal balance of distance and accuracy.
Don't Cut Down a Driver Without Making Weight Adjustments
Many golfers wanting to try a shorter driver think they can simply have their shaft cut down, but this is not the case if you want it to feel anything like a normal driver.
Making a Case for a Driver and "2-Wood" In Your Bag
It's starting to become popular having both a Driver and a "2-wood" in the bag.
Final Thoughts
We've covered a lot in this guide, but ultimately it's on you to test out different clubs and find out what's right for you.
How long is a golf driver shaft?
The standard length for a male driver shaft used to be 43.5 inches for a steel shaft and 44 inches for a graphite club. However, in recent times, the standard driver length has been accepted as 45 inches. Typically, the length of a female golfer’s club is an inch lesser than that of a male golfer’s club.
Why is grip size important?
Grip size is just as important as the size of the shafts of your driver and other golf clubs for a perfect game. Big grip size can inhibit your wrist release through the impact area and cause a fade or a block.
How to shorten a golf club shaft?
Remove the grip from the driver using a hook blade or a utility knife, as well as the grip tape on the shaft. Measure the length that you want to shorten on the shaft. Add an extra 1/8 inch to this and mark the position using a permanent marker. Fix the golf club in position in a vise.
How to make a golf club more upright?
By increasing or decreasing the shaft length by an extra half an inch will result in the club playing 1 degree more upright, or flat respectively. With a standard-length club, tall players tend to stoop quite a bit while short players will find themselves having to stand in a more upright position than required.
How to narrow down a golf shaft?
The best way to narrow down on the right shaft is to do test shots on the range with drivers of varying lengths. The right shaft length will help you to hit the golf ball with the driver much the same way that you would do with a wedge.
What is the difference between the length of the golf club and the length of the clubhead?
The length of the golf club’s shaft in relation to the overall length of the club defines the length of the driver shaft. Alternatively, this is the difference between the length of the overall golf club and the length of the clubhead. Generally, the longer your driver shaft is, the more difficult it becomes to have control over ...
When you shorten your golf shaft, do you keep in mind the after effects?
When you have decided to shorten your golf shaft, you must keep in mind the after-effects of doing so. How much and where you cut off the shaft has different effects on the golf club.
How long is a graphite driver shaft?
Drivers with graphite shafts have a standard length of 46 inches. Golfers have experienced the following when they use a 46 inch driver shaft. Some players can hit pretty well when they use a driver with a shaft length of 46 inches. Golfers with fairly flat swing styles can use this golf club better than those who don’t have this swing style.
What is the standard length of a driver with a stainless steel shaft for a male player?
The standard length of a driver with a stainless steel shaft for a male player is 45 inches. The following list highlights some experiences of players using drivers with a 45 inch shaft length.
How fast is a 45 inch driver?
Golfers have experienced more clubhead speed with a 45 inch driver over a 44 inch driver. The difference is an average of 5 to 6 mph. Some players claim that a 45 inch driver allows them to hit the ball better with increased distance and more accuracy than a 44 inch driver.
Why is it important to have a driver shaft?
As the length of the shaft increases, you tend to lose control over the golf club, and will find it difficult to hit the golf ball squarely. Having the incorrect length of golf driver can also result in chopping of the ball from fairway bunkers and the rough.
How far can a 44" driver go?
44” is the standard length for drivers with steel shaft, for male players. A 44” driver helps golfers to achieve a distance of about 275 yards. Some players get good control and distance when they use this club.
Which is better 45 or 43?
A 45” driver is a better choice than a 43 inch driver for golfers who would like to have a golf club that not only has a big shaft but also a bigger, yet lighter clubhead. A 43 inch driver has helped many golfers achieve more consistency in their game when compared to a 45 inch driver.
Which is better, a short or long driver?
A short driver is a better choice than a long driver for women and golfers who use out-to-in and over-the-top swing styles. A driver with a short shaft helps players in hitting off-the-tee shots better than a driver with a long shaft.
How long is a tour driver shaft?
The average driver shaft length on Tour is roughly 44.75 inches, give or take a half-inch in either direction depending on preference. Contrary to what some might think, there isn’t a run on longer shafts as a way to chase more distance.
How long is a standard shaft?
Standard retail length is around 45.5 inches, but with so many custom options available, it’s very possible to get the shaft cut down before you walk out the door. Some manufacturers have even started adding special shaft lengths as retail offerings.
How far should you hit a shaft for a haircut?
But don’t think that means you’re going to go from hitting it 275 yards to 250 yards. In some cases, players have seen an increase in distance by going shorter.
Why is my driver head bigger?
Put a bigger head on the same length shaft you’re used to and it looks huge because your eye isn’t used to it, so shafts have increased to look more aesthetically pleasing. And second – the biggest factor – the way we buy drivers has changed.
Do you need a longer shaft for golf?
You may even need a longer one. But, as our experts and test have shown, a good number of golfers would benefit from a shorter shaft. You may actually increase distance and there’s a good chance you’ll hit more fairways.
Is there a standard length for a golf driver?
1. There is no standard length. “There’s no golden length that is right for everyone, it’s totally individual,” says Derek Murray. “A lot will depend on timing, hand-eye co-ordination, individual ability and how you like a driver to feel. It’s not about your handicap, your swing speed or your height.
Weight
The weight of your shaft is going to primarily affect your distance. A heavier shaft will reduce your clubhead speed and thus the amount of energy transferred into the ball.
Kickpoint
Depending on the kickpoint, your shaft will bend closer to the head or the grip of the club.
Torque
Torque refers to how much the shaft twists. It’s the least talked about feature but still an important one to club fitters. High torque shafts can twist easily, and low torque shafts are resistant to twisting.
Cost
It always comes down to price at the end of the day and we are always looking for the best deal. A driver shaft can cost anywhere from $40 – $300.
Conclusion
Fitting yourself for a driver shaft is a bit like trying to do your own plumbing. You could do it yourself but if you get something wrong then you might end up in the water.
