Golf Club Loft Chart
| Golf Club Type | Standard Loft Angle (deg.) |
| Driver | 9 0 – 12.5 0 |
| Fairway Wood | 15 0 – 22 0 |
| Irons | 16 0 – 42 0 |
| Wedges | 46 0 – 64 0 |
Which Golf Club has the highest degree of loft?
Which Golf Club Has the Highest Degree of Loft?
- Through the Woods. Any golfer's bag will feature a variety of clubs with varying degrees of loft. ...
- Striking Iron. No golf bag is complete without a set of irons, which can run from as low as a 2-iron up to a 9-iron.
- Wedged In. ...
- Lob It In. ...
What are the standard lofts on golf clubs?
You can jump ahead to any part of this guide using the following links:
- Golf Club Loft Chart
- Wood Lofts
- Iron Lofts
- Wedge Lofts
- Hybrid Lofts
- Putter Loft
- Golf Clubs' Loft Comparison Table
What Golf Club has a 48 degree loft?
The 48 degree pitching wedge is one of the most commonly used wedges in the game of golf. Most golf club sets will include this pitching wedge. It is an essential wedge used by the golf players and is considered to be one of the best wedges for making long-distance shots.
How do you measure loft in a golf club?
loft is the angle between the face plane and the vertical plane of the shaft, when the club is in the normal address position and grooves are horizontal on the shaft. As described in the instructions, you will need a protractor to measure the angle between the face plane and the grooves (at 90 degrees). Table of contents
What lie angle should my clubs be?
Matching the lie angle of clubs to the specific golfer is one of the goals of a clubfitting session. Lie angles almost always range from the mid-50 degrees (in drivers) to the mid-60 degrees (in short irons). In irons, the range is typically from 59 or 60 degrees to around 64 degrees.
What does loft mean in golf clubs?
Quick reminder: Golf club loft is the angle between the clubface and the ground and influences the distance, spin, and direction of the golf ball.
What does lie mean on a golf club?
The lie angle is a static measurement that is formed between the center of the shaft and the sole of the clubhead when the club is measured in normal playing position with the center of the sole touching the ground line.
What is lie and loft adjustment?
0:095:07Adjusting Loft and Lie - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd what a loft and lie is and how we adjust loft. And lies the loft is obviously it is the it'sMoreAnd what a loft and lie is and how we adjust loft. And lies the loft is obviously it is the it's going to be the face angle of the club.
Does 1 degree lie angle make difference?
Yes it will make a difference, I play 2 degree upright and +1/2. If your hitting the ball left all the while (I am guessing your right handed) won't be to do with having the lye angle to flat.
Do I need flat or upright irons?
If your club is too upright at impact, then your shots will travel to the left of your target. Conversely, if your club is too flat, then your shots will be heading right. For every degree that your lie angle is either too upright or flat, the ball will initially travel 4 yards off your intended target line.
What is the standard lie of a 7 iron?
What Is The Standard Lie Angle For A 7 Iron? Most golf club manufacturers 7 iron lie angles are 62.5 degrees.
Does changing loft affect lie?
As you change the loft and the face angle, you will also change the lie unless there is a separate setting to alter the lie independently of loft. Loft changes the ball flight vertically and lie changes the ball flight horizontally.
What happens if lie angle is too upright?
If your lie angle is too upright, then you will tend to hook the ball. It can even cause you to develop swing compensations to correct for it, preventing you from ever developing a consistent, repeatable, and powerful swing.
How do you determine loft and lie?
0:263:40Checking Your Lofts and Lie Angles - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd a half degrees lie angle we'll see just how close that is using the Mitchell signature loft andMoreAnd a half degrees lie angle we'll see just how close that is using the Mitchell signature loft and lie machine. Here. So based on loft this one is coming in at 28 degrees.
Does upright lie promote a draw?
The upright lie also promotes a left tilting spin axis, which leads to what's generally described as draw spin. An upright lie angle basically gives you a head start, but depending on the severity of the slice conditions the golfer generates, it certainly won't guarantee a draw.
Does lie angle affect distance?
On average, our testers were 3 yards closer to their target with their best fit lie angle. That's the difference between a birdie putt inside 10 feet and one that's closer to 20. Bonus myth: do more upright clubs produce shots that go further left?
How much does 1 degree of loft affect distance?
How Much Does 1 Degree of Loft Affect Distance? Given that you're at your maximum clubhead speed, just 1-degree change in the loft angle of a golf driver can affect your driving distance by 2-4 yards.
What has more loft 56 or 60?
A 60-degree wedge has four more degrees of loft than a 56-degree wedge. This extra loft can make a big difference when it comes to getting the ball up in the air and then stopping it on the green. Sixty-degree wedges work well for greenside bunker shots, and they tend to spin quite a bit.
What does high loft mean in golf?
Lower loft is closer to vertical, higher loft is closer to horizontal. Higher loft means the clubface is pointing more upward, so the ball goes up and down more sharply. So loft gives you an idea of how far the ball will go and the type of trajectory the shot will have.
What is the best loft for a driver?
The ideal driver loft depends on your swing speed and the attack angle. Average players that swing the club less than 95 MPH will likely find that a 10.5-degree driver performs the best. Better players who can control their drives and want the most distance will lean more towards a 9-degree driver.
What is loft in golf?
Loft is the primary factor in how high or low a golf shot flies. The more loft a club has, the higher the resulting shot. Wedges have the highest loft in a set of irons.
Why is the lie angle important in golf?
Thus, the lie angle is much more important to be fit to the golfer in the irons than it is in the woods, since irons have a little to a lot more loft than do woods.
What is the difference between a driver and a wedge?
Loft gives you an idea of how far ball will go and the type of trajectory it will have. Drivers are the least-lofted clubs (not counting putters), while wedges are the most-lofted. The more loft a club has, the higher the trajectory on which the golf ball will travel, and the shorter the distance the ball will travel.
What is the loft of a golf club?
Lofts. The loft of a golf club is the angle created between the clubface and the ground - and will be different for every club in your bag. The loft will have a direct impact on the distance the ball travels - the lower the loft, the further the ball will go.
What happens if the golf club is out of the line?
If the lie angle is out, the heel or toe (depending on if it is upright or flat) will act as a pivot and throw the clubface off the intended line. If the lie angle is too upright, the heel will tend to dig in and flip the toe over, closing the face and sending the ball to the left , for a right-handed golfer.
What is a lie angle?
Lie Angle. It's with lie angle that things get a little more complicated, but in lay man's terms, it is the angle created between the shaft and the ground. It is important because a lie angle that's too flat or upright will cause the wrong part of the clubhead (toe or heel) to come into contact with the ground first.
What are golf clubs made of?
Although golf clubs are lumps of metal on a shaft, every millimetre of the clubhead is sculpted to the tightest of manufacturing tolerance to make sure they perform as expected, when required. Two of the major influences on how you golf ball launches, flies, and spins are the loft and lie angle. These terms can be challenging to get your head ...
Do golf clubs need to be flat?
If the clubs are too flat the opposite is true - the toe will dig in pushing the heel forwards, opening the face and sending the ball to the right for a right-handed golfer. As a rule, shorter golfers will generally benefit from slightly flatter lies; taller golfers may need more upright clubs.
Below is a list of the Best Loft and Lie Machine Manufacturers, in random order
The company started in 1988 and has revolutionized custom club fitting and making. Accuracy is the key to any bending operation and the company has developed machines that can bend forged and cast irons, hybrids, putters, and metal woods.
Final Thoughts
Hopefully, a few basic facts about adjusting Loft and Lie Angle will be clearer to the average golfer after reading this article. For the DIY enthusiast, it is imperative to understand how and what result is required, before venturing into the garage to do the adjustments.
Conclusion
Bending a golf club’s lie angle at home certainly steps up your golf club tinkering skills. Regripping or changing the length of a club is a bit easier than this project. However, with the proper lie and loft machine, you should have no trouble completing the project.
What is the lie angle of a golf club?
The "lie angle" of any golf club is the angle formed between the center of the shaft and the sole, or ground line, of the club when the club is soled in its proper ...
What happens if the lie angle of your golf clubs is ill-suited to you?
When the lie angle of your clubs is wrong for your swing or body type, you can put a great swing on the ball and still have problems with accuracy. Poorly fitting lie angles create pushes and pulls and other mishits.
What does it mean when your divots are deeper on the toe side than the heel side?
If your divots are deeper on the toe side than the heel side (toe down, heel up at impact) or deeper on the heel side than the toe side (toe up, heel down at impact), that's a sign your lie angles might be too flat or too upright.
What is the lie angle on a 9 iron?
Upright lie angle: A lie angle that is higher than the standard lie angle (a 66-degree lie angle on a 9-iron is more upright than the standard 9-iron lie angle of around 64 degrees). You might hear a golfer (or clubfitter) saying things such as, "You need flatter lie angles on your irons," or "I had my irons bent 1-degree upright.".
Why is a proper lie angle important?
Proper Lie Angle Is More Important in Irons Than in Woods. Don't misunderstand: Lie angle is an important factor in all golf clubs, even the putter. But having improperly fit lie angles causes more problems in irons than in the woods.
What is lie angle?
Lie angle is a factor that affects the accuracy of golf shots. Golfers who use clubs whose lie angles don't fit their body types and/or golf swings are costing themselves strokes. Matching the lie angle of clubs to the specific golfer is one of the goals of a clubfitting session.
What is the range of lie angles?
Lie angles almost always range from the mid-50 degrees (in drivers) to the mid-60 degrees (in short irons). In irons, the range is typically from 59 or 60 degrees to around 64 degrees. (Lie angles on putters reach into the 70s.)
What is the lie of a golf club?
The lie of a club is the angle formed by the intersection of the line of the shaft and the line of the ground when the clubhead is resting flat on the ground. That angle number is located between 0 and 90 degree and varies from club to club.
What does "lie" mean in golf?
Lie can also refer to the environment in which the ball finds itself, the ball or shot lie. It can also refer to the number of strokes a player has taken up to a point on a given hole.
Why is it important to use the correct lies in golf clubs?
Using clubs with the correct lies can prove crucial when working to maximize the chances of hitting the ball straight. Indeed, a club that is too upright for its golfer will see its toe lift from the ground instead of laying flat and as a result balls struck with it will tend to go left of the intended target.
What happens if you hit a ball with a flat piece of plastic?
Using that tape and hitting balls from a flat piece of plastic will leave an impression on where the sole hit hardest on the ground. If the impression on the tape is made in the center you are using the correct lie. If the impression is close to the heel, you are using clubs that are too flat.
What is the difference between a gold dot and a maroon dot?
At one end of the spectrum is the Gold dot with a 3.75 degree flatter lie and at the other end is the Maroon dot with a 4.5 degree upright lie. Likewise, a shorter golfer will likely be more comfortable using clubs whose lies have been made flatter – less upright – they he would using normal, standard lie clubs.
How to test your golf club's lie angle?
How to test your lie angles. 1) Place a sole tape or black electrical tape on the sole of your club. 2) Hit a ball solidly off of a lie board. 3) Measure how far the center of the sole impact impression is from the center of the scoring lines. 4) Have your lie angles bent 1 degree for every from the centerline.
Why is it important to have a proper lie angle?
Having the proper lie angle will help every golfer with better direction. You could have a great swing with the proper path, but an improper lie angle will tilt the face away from the intended target. Direction is half of the battle, why not have your lie angles checked!
What happens if a golf club lands heal heavy?
If the club lands heal heavy, the toe will close causing shots to the left = hooks. Not only will you sacrifice direction, but with the face plane tilting at impact, the ball will slide across the face causing problems with centeredness.
How much gap between irons?
Most irons have a 4 degree difference between each club from the 5 iron through the sand wedge and around 2 to 3 degrees for the longer irons, this typically equates to a 10 yard gap between each club. If you are having trouble with controlling your distance on solidly struck balls, it may not be your swing! History of iron lofts.
