Characteristics of a Tee in Disc Golf The tee is a designated area in which the player makes the first throw of a hole. According to PDGA recommendations, the minimum area for a good tee box is at least 3 meters long and 1.2 meters wide.
What does * on a disc golf tee mean?
* indicates "Disc golf in COUNTRY or TERRITORY" links. A disc golf tee (commonly referred to as a tee box or the box) is the starting position of a hole. The PDGA recommends that the tee box be no smaller than 1.2 meters wide by 3 meters long. The tee box is usually a pad of concrete, asphalt, rubber, gravel, or artificial turf.
What is the size of a golf disc?
Disc golf discs are smaller than Ultimate flying discs or general-purpose recreational frisbees. They typically measure 21–22 cm (8. 3–8. 7 in) in diameter and weigh 130–180 g (4. 6–6. 3 oz). All PDGA-approved discs measure 21–30 cm (8. 3–11. 8 in) in diameter and weigh no more than 200 g (7. 1 oz).
What is the tee area of a golf course?
A teeing area, or tee, is the area bounded by the edges of a tee pad, if provided. Otherwise, it is the area extending three meters perpendicularly behind the designated tee line. The tee line is the line at the front of the teeing area, or the line between the outside edges of two tee markers.
Are there any tees for women on a disc golf course?
The terms Women's, Senior's or Junior tees should not be used. LAYOUT: Disc golf courses can be enjoyed safely in many different types of public parks and private areas, whether the space is used exclusively for disc golf or shared with other activities. Here are some basic ideas about the layout to keep in mind when designing a course.
What are the dimensions of a disc golf tee pad?
Typical size for pads at the longer tee positions is 6 ft (2m) wide by 13 ft (4m) long. The back end might flare out to 10 feet (3m) wide. Minimum rectangular size is 4 feet (1.2m) wide by 10 feet (3m) long. If you need to conserve materials, make tee pads shorter on short or downhill holes and longer on long holes.
How much space is needed for a disc golf course?
A simple 9-hole course can be built on as little as 2 acres for around $3000. Championship caliber courses typically require 1 to 2 acres per hole. Disc golf courses can be installed in phases and upgraded over time.
How big should a tee box be?
Black tees: 15 feet by 15 to 20 feet. Championship tees generally generate light play and can be as small as you can mow, especially on a course that's 7,100 yards or longer. Blue tees: 30 feet by 30 feet, with occasional use of the front for white tee markers.
How do you make a disc golf tee pad?
2:5910:32Disc Golf Tee Pads Made Easy - YouTubeYouTubeStart of suggested clipEnd of suggested clipHours now to build one of these double frame disc golf tee boxes you're gonna need some simple toolsMoreHours now to build one of these double frame disc golf tee boxes you're gonna need some simple tools nothing complicated. You got a couple shovels. We have a tamper. Here. An electric drill.
How long is the average disc golf hole?
The PDGA recommends that courses average 200–400 ft (61–122 m) per hole, with holes no shorter than 100 ft (30 m). The longest holes in the world measure more than 1,500 ft (460 m) long.
What is it called when you shoot a 2 on a par 5?
2. Albatross or Double Eagle. An albatross is achieved when a player either aces a par 4, or scores a "2" on a par 5.
How do you build a golf course tee box?
0:004:33Building a Tee Box on the Backyard Golf Hole - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd then we're going to show you how we built this new level. T-box a few weeks ago i built aMoreAnd then we're going to show you how we built this new level. T-box a few weeks ago i built a practice golf hole for my kids.
Should tee boxes be flat?
Flat ground is specified for a golf tee, although each tee should actually be on the slightest of slopes at around 1 in 100 in order to create an area where turf will successfully grow without becoming flooded or keeping puddles. The slope should follow the run of general ground water flow.
Are tee boxes supposed to be flat?
tee boxes should be FLAT and either level, if the the correct sub surface is there or either a slight slope if not.
Do you have to throw from the tee box in disc golf?
Supporting point contact outside the teeing area is allowed if it comes before or after, and not at, the moment the disc is released. So not only does one supporting point need to touch the tee pad, ALL of your supporting points must be touching the tee pad at the time of release.
What is the most common type of throw in disc golf?
the backhandThe most commonly known throw in disc golf is the backhand. It derives its name from tennis because the motion (having the arm cross over in front of the body, then moving outward and releasing with the arm extended before the body) is reminiscent of the tennis stroke.
Who invented disk golf?
Ed HeadrickDisc golf / CreatorEd Headrick, also known as "Steady" Ed Headrick, was an American toy inventor. Headrick served in combat in the army in WWII and was a deep-sea welder. He is most well known as the father of both the modern-day Frisbee and of the sport and game of disc golf. Wikipedia
What is the tee box in disc golf?
When you play disc golf, the tee marks the starting point of the hole. This part of the course might also be called the box or tee box. You make your first throw from within the designated teeing space, and the course progresses from there.
How to play disc golf?
Part B discusses the actual game play. With the teeing area established, players must follow these rules to avoid being penalized: 1 One supporting point must be inside the designated area when the disc leaves the hand. 2 No supporting points may be outside the tee pad. 3 Supporting points refer to the parts of the body that are touching the teeing area surface or other supporting structures. 4 Players can have supporting points outside the teeing area immediately before or after the release of the disc, but all points must be inside at the moment of release.
What does a teeing line mean?
Teeing lines may be drawn between tee markers. They indicate the frontmost portion of the teeing area, which players cannot step over. You’ll notice that tee pads are optional. You’ll also notice that there are no specific regulations on the size or the material of a tee pad.
What is a concrete tee pad?
Concrete tee pads are most commonly used in permanent, official courses. The material is durable, holds up in harsh weather, and creates a flat and stable surface. Temporary courses might use existing concrete structures like sidewalks. The course designer will use tape or paint to mark the teeing area.
What are surface pads made of?
Surface pads might be made of a variety of materials including: Artificial turf, commonly used indoors. Gravel. Rubber. Asphalt. Concrete. When a course does not use a tee pad, the teeing area will be marked in other ways. A line may be drawn on the ground to indicate the front of the box.
What are the signs on a golf course?
Tee signs are an important part of any established course. They will be erected near the tee pads. In addition to helping players find the teeing area easily, the signs may have information including: A map of the course. Sponsorship logos. The name of the hole. Par. Distance from the tee to the hole.
How wide is a tee box?
According to PDGA recommendations, the minimum area for a good tee box is at least 3 meters long and 1.2 meters wide. Rather than being a marked-off area of turf, tee boxes tend to have standing surfaces made of different materials.
What is a teeing area?
A teeing area, or tee, is the area bounded by the edges of a tee pad, if provided. Otherwise, it is the area extending three meters perpendicularly behind the designated tee line. The tee line is the line at the front of the teeing area, or the line between the outside edges of two tee markers. When the disc is released, ...
What is a supporting point in golf?
A supporting point is any part of the player's body that is, at the time of release, in contact with the playing surface or any other object that provides support. The player is allowed to have a supporting point outside the teeing area before or after, but not at, the moment the disc is released.
What is a disc golf tee box?
A disc golf tee (commonly referred to as a tee box or the box) is the starting position of a hole. The PDGA recommends that the tee box be no smaller than 1.2 meters wide by 3 meters long. The tee box is usually a pad of concrete, asphalt, rubber, gravel, or artificial turf. Some courses have natural turf with only the front of the tee position marked or no tee boxes at all and players begin from a general location based on the course layout.
What is disc golf?
Disc golf is a flying disc sport in which players throw a disc at a target; it is played using rules similar to golf. Most disc golf discs are made out of polypropylene plastic, otherwise known as polypropene, which is a thermoplastic polymer resin used in a wide variety of applications. Discs are also made using a variety ...
What was the first disc golf target?
Ed Headrick's Flying Disc Entrapment Device Patent 4039189. The first disc golf target made with chains that became the standard for disc golf. In 1977, Headrick and his son Ken developed the modern basket catch for disc golf, US Patent 4,039,189, [4] titled Flying Disc Entrapment Device, which they trademarked "Disc Pole Hole". The Disc Pole Hole created a standardized catching device that had a chain-hanger that held vertical hanging rows of chain out and away from a center pole. The vertical rows of chain came together forming a parabolic shape above and angling down towards a metal basket that attached to and surrounded the center pole, and could catch a disc from all directions.
How many holes are there in disc golf?
Disc golf courses. Most disc golf courses have 9 or 18 holes, and exceptions most often have holes in multiples of three. Courses with 6, 12, 21, 24 or 27 holes are not uncommon. The PDGA recommends that courses average 200–400 ft (61–122 m) per hole, with holes no shorter than 100 ft (30 m).
What is the most common type of target in disc golf?
Targets. A disc resting in a basket, the most common type of target. Main article: Basket (disc golf) Although early courses were played using trees, fence posts, or park equipment as the target, standard disc golf baskets are by far the most common type of target on modern courses.
How many disc golf courses are there in the world?
There are disc golf courses on every continent, including 24 in Latin America, 8 in Africa, and one in Antarctica. The Åland Islands have been defined as the world's largest single disc golf park, with one course in each of the 16 municipalities of Åland. Country. DGC.
Where is the largest disc golf tournament held?
One of the largest is the United States Disc Golf Championship . Every year, the largest teams tournament in the world is held in Austin, Texas, by John Houck. To prove the year-round sustainability of the sport, annual winter tournaments known as Ice Bowls are held at courses around the world.
What is the diameter of a golf disc?
Most golf discs don’t vary much and are generally between 21 and 21.4 centimeters. Height: This is how tall the disc is. Faster discs generally have less height.
What is the difference between a tall disc and a fast disc?
It depends on the thickness of the plastic, and how much exterior curve the disc actually has. Rim Width: This is also known as “Wing Length” and refers to the width of the disc’s rim. Faster discs typically have wider rims.
What is the teeing area?
The teeing area is where you start each hole and is one of the five defined areas of the course. It has a defined size and shape that is a two club-length deep rectangle measured from the tee-markers you are playing your round from. You can stand outside the teeing area as long as your ball is within the teeing area.
Can you stand outside the teeing area?
You can stand outside the teeing area as long as your ball is within the teeing area. Before you play, you are not allowed to move the tee-markers. When playing from the teeing area, you can tee your ball or play it from the ground, use a borrowed or abandoned tee (even if it is broken), and re-tee your ball if it falls off ...
Overview
Disc golf courses
Most disc golf courses have 9 or 18 holes, and exceptions most often have holes in multiples of three. Courses with 6, 12, 21, 24 or 27 holes are not uncommon. The PDGA recommends that courses average 200–400 ft (61–122 m) per hole, with holes no shorter than 100 ft (30 m). The longest holes in the world measure more than 1,500 ft (460 m) long. Course designers use trees, b…
Origin and early history
Disc golf was first invented in the early 1900s. The first game was held in Bladworth, Saskatchewan, Canada, in 1927. Ronald Franklin Gibson and a group of his Bladworth Elementary School buddies played a game of throwing tin lids into 4-foot wide circles drawn into sandy patches on their school grounds. They called the game Tin Lid Golf and played on a fairly regular basis. However, after they grew older and went their separate ways, the game came to an end. I…
Gameplay
The sport of disc golf is set up similar to a game of golf. A "round" is played on a disc golf course consisting of a number of "holes", usually 9 or 18. Each hole includes a tee position for starting play and a disc golf target some distance away, often with obstacles such as trees, hills or bodies of water in between. Players begin by throwing a disc from the tee, without crossing over the front …
Disc types
Disc golf discs are smaller than Ultimate flying discs or general-purpose recreational frisbees. They typically measure 21–22 cm (8.3–8.7 in) in diameter and weigh 130–180 g (4.6–6.3 oz). All PDGA-approved discs measure 21–30 cm (8.3–11.8 in) in diameter and weigh no more than 200 g (7.1 oz). Discs used for disc golf are designed and shaped for control, speed, and accuracy, while g…
Throwing styles
While there are many different grips and styles to throwing the disc, there are two basic throwing techniques: backhand and forehand (or sidearm). These techniques vary in effectiveness under different circumstances. Their understanding and mastery can greatly improve a player's game, and offer diverse options in maneuvering the disc to the basket with greater efficacy. Many players use what is referred to as a run-up during their drive. This is practiced to build more forw…
Scoring
Stroke play is the most common scoring method used in the sport but there are many other forms. These include match play, skins, speed golf and captain's choice, which in disc golf is referred to as "doubles" (not to be confused with partner or team play).
Regardless of which form of play the participants choose, the main objectives of disc golf are conceptually the same as traditional golf in the sense that players follow the same scorekeepin…
Tournaments
Tournaments are held nationwide and year long in the United States. Sanctioned Tournament play is communicated through the Professional Disc Golf Association Membership. The PDGA provides international, professional, and amateur disc golf tournaments as well as communicates event results, opinions and other information beneficial to the sport via electronic and printed media. I…