Surely, you should not be surprised if it cost you more to reshaft your clubs at the local country club repair center than a small golf club repair shop. It all depends on how many club you need re-shafted and the location of the place you want it done, but it should not cost above anywhere from $15 to $100 in labor.
How much does it cost to reshaft a golf club?
To reshaft a golf club, you’re likely to spend between $20 to $200 per club. The cost of reshafting your golf clubs will vary greatly depending on where you go to have it done. The cost will depend on the cost of the labor, the number of clubs, and the cost of the new shafts.
How much does it cost to re-grip golf clubs?
Clubhouses may charge an additional fee to re-grip the clubs. This process can range anywhere from $5 to $15. Grips are going to vary in pricing. Higher end grips are going to cost more than a lower end grip. This is going to be all up to the user on what type of grip you want.
What are the benefits of reshafting a golf driver?
Reshafting, your golf driver, has many benefits, such as boosting your performance. By reshafting the driver, you will be saving money since it is significantly cheaper than buying a new one.
Can you remove a broken shaft from a golf club?
If your shaft is broken or doesn't fit your swing, you can have it removed by a Golf Galaxy Certified Club Technician. We have the tools to remove graphite or steel shafts without damaging other components of your golf club. Is your club too short?
What is the average cost to Regrip golf clubs?
between $35-$190The average cost to regrip your golf clubs will be between $35-$190. The price you pay will depend on what grips you choose and whether or not you regrip them yourself. Expect to pay $35 if you do everything yourself and get the cheapest grips.
How much does it cost to get a driver Reshafted?
The cost of reshafting a golf driver is between $15 and $45 USD. The labor cost of reshafting is usually around $20 USD. However, the actual overall cost can also depend on the materials used as well as the type of grip and shaft you are looking at.
Is it worth Reshafting my irons?
Reshafting is just one way to keep your clubs performing at a high level. You can also benefit from regripping your clubs. Replacing worn-out golf grips can help make your clubs feel new again. Adding the right shaft to your favorite clubs can get you back on the course and working toward a new personal low round.
How long does it take to Reshaft a golf club?
If in stock, our Certified club repair technicians can have your new shaft installed and ready for play within 48 hours.
How much does it cost to Reshaft a golf club?
The average cost to reshaft your golf clubs is $24 per club plus the cost of the shaft and grip. A new iron shaft and grip can range between $10 and $95 while a new driver shaft and grip can range between $18 and $440. The majority of the cost comes down to what type of shaft you want and what grips you like.
How much does a shaft fitting cost?
The average golf club fitting cost will run you between $100 and $200. That fee is just for the fitting professional to analyze your current setup and suggest the best path forward. An example of an affordable club fitting option is GolfTec who charges $125 on average for a fitting.
How often should you Reshaft irons?
Should I reshaft irons or buy new ones? This depends on the two points of whether your golf club is fitted and new, or is old and unfitted. If your golf clubs are old and unfitted, then go for a new set of golf clubs. But if the clubs are new and fitted, then you should have them reshafted.
Are graphite shafts good for irons?
Graphite shafts are much lighter and more expensive in comparison to steel shafts, and weigh between 50 and 85 grams. As a result, the lightweight shafts on graphite irons can help to create a greater swing speed for more power.
Is it easy to Reshaft irons?
Golf irons can be a bit easier to reshaft than a driver. If you are reshafting with steel irons, it is usually pretty straightforward. However, you will need the proper tools and space to complete this project.
Do iron shafts make a difference?
It can give you the best chance at striking the center of the face that will result in optimal launch conditions on the course. It absolutely has an effect on how well you can play. The shaft is similar to the transmission of a car. While it's not the engine, it's still extremely important.
Can you reuse a golf shaft?
However, if the shaft tip stays intact, take a closer inspection of the tip section to see if you notice any longitudinal cracks or delaminating, or basically anything that you think would be considered damage. If not, there is a good chance you could reuse the shaft into another head or the same head later on.
Can you change golf club shafts?
Once a golf club shaft has been broken, it cannot be repaired, but it can easily be replaced. Shafts can be replaced at golf pro shops and most golf stores, but it is also a fairly easy project to do yourself.
What is a multi-material shaft?
Multi-material – This type of shaft is a combination of steel and graphite shafts. Titanium – Since this material is lighter than steel, the shaft is lightweight and absorbs more vibrations than steel. Nanofuse – A Nanofuse shaft is made from a carbon fiber sublayer fused with a nanocrystalline alloy.
What is the shaft of a golf club?
The shaft is the part of the golf club that connects the grip to the head of the club. This part of the club comes in various lengths and flex levels to match the swing speed of the golfer. This is important to keep in mind when you go to reshaft any of your clubs. It’s also tapered, with the top being wider than the bottom.
What happens if your golf club shaft breaks?
When the shaft on your golf club breaks, you’ll need to replace it. It isn’t something that can be easily repaired. This part of the club controls all of the power of your swing as you hit the ball. Fixing a broken shaft is going to reduce the strength it has overall. The best option is to replace it completely.
What are the different types of shafts?
You’ll find a list of the different types of shafts below. Steel – There are two types of steel shafts: stepped steel and rifle steel. Stepped steel is used to reduce the diameter of the shaft between the two ends; rifle steel is smooth from top to bottom.
How much does it cost to reshaft a golf club?
To reshaft a golf club, you’re likely to spend between $20 to $200 per club . The cost of reshafting your golf clubs will vary greatly depending on where you go to have it done. The cost will depend on the cost of the labor, the number of clubs, and the cost of the new shafts. Let’s take a closer look at how much it costs to reshaft a golf club.
Can you reshaft a golf club by yourself?
However, if you’re unsure of the process, it might be best to get a professional to take a look. It will vary slightly depending on if you’re using a steel or graphite shaft. If you’re inclined to reshafting your club by yourself, you also risk doing the job incorrectly, which could be more costly to fix.
Is a putter shaft cheaper than an iron shaft?
Of course, the price of the shaft is going to vary by brand. It will also depend on the length of the shaft as well as the intended use. For example, a shaft for a putter will be cheaper than a shaft for an iron. The material of the shaft will also change the cost of it.
How long to let a golf shaft rest?
Don’t use too much and cause a mess. Reinsert the shaft, now align the shaft graphics to how you want, let it rest in the playing position for 24 hours. After, apply some acetone to a paper towel and hold the towel to the ferrule and spin it.
How much does it cost to replace a golf shaft?
Most retailers will charge $15-$25 to install a shaft, once a club is re-shafted it needs a new grip which ranges from $3-$12, the average cost to replace a golf shaft is $18-$37 per club. Clubs are either graphite or steel, reshafting a graphite club far more expensive.
How much does it cost to install a golf grip?
Labor costs vary as much as the price, most retailers will charge $15-35 but it can even be as high as $100, will grip installation costing around $3-5 in most Golf shops, the ProShop mention above charges $3 labor per grip.
Can you use lighter fluid instead of grip solvent?
Yes, you could use lighter fluid instead of grip solvent but they make the grip smell like gas for a long time. You have to cut a shaft to a specific length with a tube cutter, it’s even more difficult with one, you could cut the shaft off and drill out the club’s hosel (where the shaft is inserted).
Can epoxy glue be used to keep a golf club together?
Epoxy (glue) come in different types and have different uses, not all of them will work for keeping a Golf club together.
What is re shafting a golf club?
Re-shafting a golf club is the process of removing the old shaft and replacing it with a newer one. Golfers may often have this process done if they want a new shaft or the previous one broke. Installing a new shaft can be a time-consuming process for many golfers, and this is one of the main reasons that most turn to a professional.
How to remove old shafts on iron?
During the procedure, the older shafts on your iron or driver will be removed by heating the shaft with a heat gun. Once the older shaft is removed, the undercarriage will be cleaned up with a sandpaper until it is shiny in appearance. The newer shaft will be cut to size and applied to the golf club using an epoxy.
How much does it cost to reshaft a golf club?
How much does reshafting golf clubs cost? Depending on the quality of the shaft, the cost can be anywhere from $15 to as much as $150 per club. If the shaft is a higher name brand shaft, it is going to be near the higher end, while a lesser known brand can be toward the lower end. Materials will also play a role.
How much does a bore thru head cost?
Clubs that require a special adapter such as a bore-thru head can cost an extra $5 to $20. If doing the job yourself, tools such as the grips, dremel tool epoxy glue, tape and solvent will be needed in order to complete the job.
What are the factors that determine the shaft of a golf club?
However, there are several important factors to consider when getting a golf club or a shaft. The factors include kick-point, flex, weight, alignment, and length of the shaft.
What shaft should I use for a beginner golfer?
So, it’s a wise choice for the beginner golfer to have. 4. The titanium shaft. The titanium shaft is another new type of shaft you will find around golf shops. It’s as light as steel (titanium is lighter than steel, though). It is also as strong as the steel shaft.
What is a multi-material shaft made of?
The name of this shaft suggests that it comes built of more than one material. The multi-material shaft is made of steel and graphite, with the former only appearing at the tip. In other words, this type of shaft comes with a graphite tip. But a greater part of it is built with steel material.
What is the importance of golf club?
Your golf gears should also be intact. A golf club is an essential gear in golf playing. You will need it to drive the ball into the 4.25 inches golf hole.
What is the primary concern in golf?
Most golf players, at some point, may prefer a stiffer, heavier, or lighter shaft, as the case may be. However, the primary concern is to get the desired results. That’s what matters in the game of golf.
Can you repair a golf club shaft?
The answer is no! Having a broken shaft means you need to get a replacement. It is not advisable to repair a broken shaft. The wise thing to do is to replace it. It is common for a shaft to break, though many high-end golf clubs do have shafts that last longer.
Is it normal to change your shaft?
As you gain more experience from regular practice, your swing mechanics will automatically change for the better. So, it is normal for a golf player to outgrow a shaft.
How much does it cost to reshaft irons?
Either the iron shaft is damaged or broken, or needs to change for swing style, so iron reshafting is more reasonable than buying a new one. By several market research, you need to spend $15 to $25 to install an iron shaft. After re-shafting, you need to set up a new grip. That will cost around $3 to $12.
Reasons for reshafting irons
Reshafting iron is a fundamental step to keep your golf iron clubs up to date. Not only for changing the broken shaft but there are some other reasons also such as-
How to reshaft iron clubs?
You can reshaft iron clubs from servicing stores. But the process isn’t very complex. If you want, you can reshaft in your home with less cost.
Advantages of reshafting irons
Reshafting is not just repairing but also has several advantages. That will play a crucial role in the overall performance of a golf player like-
Final words
Reshafting irons have a direct relation with the overall performance of golf players. The process is simple as well as reasonable. You can make a brand new golf club set by reshafting them as per your preferences.
Can golf drivers be reshafted?
A golf driver can absolutely be reshafted. Reshafting, your golf driver, has many benefits, such as boosting your performance. By reshafting the driver, you will be saving money since it is significantly cheaper than buying a new one.
How much does it cost to reshaft a driver?
Golf Trusted Source 125 Years After the First College Golf Match, a Rematch On a fall day in 1896, a group of Yale students, caught up in a new sports craze called golf, traveled from their New Haven, Conn., campus by train and stagecoach to a course north of New York City — one of the few clubs in the country at the time — to take on some chaps from Columbia.
Is it better to reshaft a driver or buy a new one?
Whether or not you reshaft your driver or buy a new one is up to you. If the driver is barely cracked or damaged at either of the two sides, it may be better to reshaft. Nonetheless, if broken down the middle, it will be in your best interests to purchase a new driver.
Ways to save money reshafting your driver
One way to save money reshafting your driver is to check the warranty. By checking the contract, you will find out if the manufacturer will replace the golf driver. You can also save costs by reshafting your driver is by doing it yourself.
DIY driver shaft
There are many videos online that show you how to easily replace your driver shaft on your own. Replacing the driver shaft on your own or DIY is a cost-effective way to replace your driver shaft. Some of the adjustable drivers require a ferrule for reshafting. The ferrule should be in suitable shape before you reshaft.
Final Thoughts
There are many benefits to reshafting a driver, such as improving your golf game. There are even more benefits if you decide to reshaft the driver on your own without bringing it to a pro shop. By doing all of the reshafting yourself, you will save money.
bub72ck
My club guy charges $15.00 for a graphite wood resahft. This includes spine alignment and grip. I prefer him to do it because I'm usually dealing with expensive shaft and heads and like the idea of the club being properly spined. I know how to reshaft but don't have the equipment at my house.
plus8
To resurrect for just a second -- when is it not worth it to resaft? If it's 15 bucks, plus price of shaft and maybe grip, we're talking up to $35 or $40 dollars apiece (is that correct?). If you have 7-8 irons t say, $35.00 each, that's about $360.00 for reshafting an old set of irons.
plus8
Okay, so that's $20 bucks, plus the $20.00 or so for a KBS shaft, right? So isn't that around $320.00 total? So if I sold my I15's for say, $550.00, then ordered a new set for $750 or so, I'd be out $200.00. If I bought shafts myself, I'd pay around $200.00, then the cost of trimming and epoxy glue (I'd do that myself).
What to do if your golf shaft is broken?
If your shaft is broken or doesn't fit your swing, you can have it removed by a Golf Galaxy Certified Club Technician. We have the tools to remove graphite or steel shafts without damaging other components of your golf club.
What is loft and lie adjustment?
Loft and lie adjustment involves the use of specially-designed equipment and a great deal of experience. Golf Galaxy Certified Club Technicians use methods and procedures to bend golf clubs as described by The GolfWorks. We have the knowledge and science to meet your individual loft and lie specifications.
What to do if your club head is loose?
If your club head is loose or has become unattached from the shaft, don't go buy a new club. Golf Galaxy's Certified Club Technicians can install the head correctly and re-epoxy the head so it is returned to a like-new state.