Standard Golf Club Sizes For Each Club
Length of Standard Men's Golf Club Set | |
Driver | 45in |
3 Wood | 43in |
5 Wood | 42in |
7 Wood | 40in |
GOLF CLUB | LENGTH FOR MEN (steel/graphite shaft) | LENGTH FOR WOMEN (steel/graphite shaft) |
---|---|---|
7-iron | 37/37.5 inches | 36/36.5 inches |
8-iron | 36.5/37 inches | 35.5/36 inches |
9-iron | 36/36.5 inches | 35/35.5 inches |
PW | 35.5/36 inches | 34.5/35 inches |
What are the measurements for a golf club?
Golfer’s Measurements. There are two measurements that you need to take before shopping for a golf club. The first one is your height. Manufacturers usually make clubs to account for golfers anywhere between 4’8” to 6’7” inches tall. The second measurement is wrist-to-floor distance.
How do you determine the length of custom clubs?
The length of custom clubs, as suggested by GolfSpyder.com, is determined by measuring -- in inches -- the distance from your wrist to the floor. For this measurement, wear everyday street shoes with a sole that does not increase your height by more than 1 inch. When measuring, stand "at attention" with your feet approximately 1 foot apart.
What is the best height for golf clubs?
The standard golf clubs on the market for men are for those that are around 5’ 6” to 6’ 0”. However, manufacturers usually make clubs to account for golfers anywhere between 4’ 8” to 6’ 7” inches tall. These will just need to be ordered custom.
What does the s Mean on the club length chart?
And a S means that the proper club length for you is Standard. Use the Chart to determine how much longer or shorter (than standard) your club length should be by finding where Your Height and Wrist-to-Floor Measurements intersect:
How long should my golf clubs be for my height?
Using the ratio of every 6" of height there should be a 1" change in length then there should be a 1 ½" difference between their 5-irons. For example, recommend 36.5" for the lady and 38" for the man (or 36.75" / 38.25").
What is the standard length for golf irons?
The standard length of a steel 9 iron is 35.5 inches. For female golfers, the average length is 34.5 inches. With graphite shaft, the standard length for men is 34.35 inches and for women, it is 33.75 inches. A 9 iron club is categorized as a short iron golf club.
How do you measure what size golf clubs you need?
To choose golf clubs that are the right fit, all you need is your height. If you're between 5 ft 9” and 6 ft (1.5 m 23 cm and 1.8 m) tall, you should go with the standard length for golf clubs. If you're taller than 6 ft (1.8 m), you'll need longer clubs.
What is the standard length of a 7 iron?
The standard length of a 7 iron is 37 inches on steel and 37.5 inches with the structure made of graphite.
How are golf irons measured for length?
A 48” golf club ruler is placed along the backside of the club with the tip of the rule touching the ground by the club's heel. The final length is measured at the edge of the grip cap (and not the very top). This method is used in all cases except putters that the shaft is not located at the heel.
What is the standard length of a 5 iron?
Standard Club LengthClubMen GraphitLady SteelWood 7#, 9# usw.4139,5Iron 3#39,538Iron 4#3937,5Iron 5#38,53728 more rows
How do you measure your wrist and floor for golf clubs?
To determine your wrist-to-floor measurement wear normal shoes and stand on a hard surface with your arms hanging relaxed at your sides. Then have someone measure from the point where your hand meets your wrist (your “wrist crease”) to the floor.
What Are Standard Length Golf Clubs?
As you can see in our golf club size chart above these would typically fit in the 34″ to 35.5″ range.
Why is it important to know the size of your golf clubs?
This is because if you use golf clubs that are either too tall or too short for you there is a chance that you won’t hit shots consistently and more distance.
Why is it important to choose the right golf club size?
These range from having a better connection with your shots and hitting them from the correct lie angle. Both of these benefits will contribute to your achieving a better golf handicap score.
What does it mean to use the correct size golf club?
When you use the correct golf club sizes you will be hitting your shots with the ideal length club which will help you to get a solid contact on your shots. This accurate measurement can help you to achieve consistent contact by ensuring the club face is squared properly at impact.
How does the handicap index work?
The golf handicap index works by calculating your score s from previous rounds. Therefore with better shots you are more likely to achieve better scores on the golf course.
How to determine what length golf clubs to buy?
Using your height and then your wrist to floor measurements is a great way to get an idea of what the right length of clubs will be.
Why are golf clubs so complex?
The reason that golf club sizes can be a complex topic is because it isn’t as easy as just saying that height is the only factor in which size to choose. In our complete guide we will explore what other factors are at play and what some of the main benefits are from taking the time to choose golf club sizes bespoke to yourself.
What happens if the club is too long?
If the club is too long, the face tape may show heel dominant striking. If the club is too short, the face tape may show toe dominant striking. If dominant striking is found, the demo length should be changed accordingly. This is to see whether the impact location changes with the length.
What are the problems with driving a golf club?
Direction problems: When looking at the driver length, too long can lead to inconsistent ball striking or strikes towards the heel. Heel strikes encourage left-to-right curvature i.e. Fade, cut, slice or push slice. Strike problems: Ball striking can be more difficult if your club is too long.
What is the average driver length for Rickie Fowler?
Rickie Fowler is known to have used a 43.5” driver length and the Tour average build is 44.5”. Tour players main priority is hitting fairways for days, weeks and months. Shorter driver lengths make it easier to hit with the centre of the face more frequently.
What happens if you have too short of a club?
Direction problems: Too short club length can lead to strikes towards the toe or low on the face. Toe strikes encourage right-to-left curvature i.e. Draw, hook or pull hook. Strike problems: With too short club length, the most common problem is ‘Thin’ shots (hitting higher on the ball).
What is the purpose of the results of a scale?
The results of that scale or chart are used to find the first demo club in a fitting or to see how far away your existing clubs are from the scale.
What can you use to wipe off golf ball?
You could use something that will wipe off like water or marker pens on the golf ball to give yourself some easy feedback on the clubface.
How long has Barry Lane been on the European Tour?
Barry Lane maintained his position on the European Tour for 25 years, he continues to play on the Champions Tour now. He used a 31” putter for most of that time. The idea is, it gives him far more control over the clubhead.
How long is a steel driver?
Standard Length for Woods. The standard length of a steel driver for a man is 44 inches; a graphite driver is 44.5 inches; steel 3s, 4s and 5 woods are 42.5, 42 and 41.5 inches, respectively; graphite 3s, 4s and 5 woods are 43, 42.5 and 42 inches, respectively; both the 7 and 9 woods are 41 inches for steel and 41.5 inches for graphite;
How much wrist to floor to add to golf club?
For example, if you are 6 feet tall and your wrist-to-floor measurement is 39 inches, you will likely find it beneficial to add 1.5 inches to the standard length of any golf club. If you are 5 feet tall and your wrist-to-floor measurement is 30.5 inches, your golf game may benefit by deducting 1 inch off of any standard length club.
How long is a golf iron?
The same is true for graphite golf irons: the standard length for a 1 iron measures 40 inches, a 5 iron is 38 inches and a 9 iron is 36 inches. As is true for woods, the standard length measurement for women's irons is 1 inch less for both steel and graphite irons. For instance, a 1 iron is 38.5 inches and a graphite 1 iron is 39 inches.
How long is a graphite 7?
For example, the standard length for a steel 3 wood is 41.5 inches, and a graphite 7 wood is 40.5 inches.
How to measure length of custom golf clubs?
The length of custom clubs, as suggested by GolfSpyder.com, is determined by measuring -- in inches -- the distance from your wrist to the floor. For this measurement, wear everyday street shoes with a sole that does not increase your height by more than 1 inch. When measuring, stand "at attention" with your feet approximately 1 foot apart. To yield the best results, have a professional assist you with this process.
What type of club is used for short shots?
In contrast to woods, players generally use irons for shorter shots as they get closer to the greens. This type of club usually has a flat, solid head. Wedges are generally used when trying to chip out from a particular obstacle such as sand and rough.
Why do golfers use woods?
Golfers typically use woods without tees, because the bottom of the heads are flat to prevent the club from digging into the ground.
How long should a golf shaft be?
The chart recommends + 0.25 inches. It means that your golf shaft has to be made 0.25 inches longer than the standard length. Similarly, if your height is 66“ and the wrist to floor distance is 31.5 inches, the chart recommends – 0.75 inches.
How to measure golf club length?
Important Information before we know “How to Measure the Golf Club Length.” 1 The standard irons designed for women are usually an inch shorter than the standard irons designed for men. 2 The United States Golf Agency (USGA) limits the maximum length of golf clubs. 3 The minimum length for all the golf clubs, including putters, is 18 inches. 4 The maximum length for all golf clubs except the putters is 48 inches. 5 The putters do not have the maximum length limit. 6 The shaft length has everything to do with the length of the golf clubs. The longer shaft does mean longer golf club length. 7 A golfer uses woods, hybrids, and irons for different types of shots. It is the reason why their golf club is mostly empowered with a mix of these three.
What does a longer shaft mean?
The longer shaft does mean longer golf club length. A golfer uses woods, hybrids, and irons for different types of shots. It is the reason why their golf club is mostly empowered with a mix of these three. Therefore we must know about the standard length of the woods, and irons. Let’s first discuss the standard lengths of woods.
How to measure club size with LDA?
The following are steps of measuring the club size using the LDA method. Step 1. First, put the shaft against the wall so that the toe of the driver is placed on the ground. Step 2.
How long are putters?
The United States Golf Agency (USGA) limits the maximum length of golf clubs. The minimum length for all the golf clubs, including putters, is 18 inches. The maximum length for all golf clubs except the putters is 48 inches. The putters do not have the maximum length limit.
Where is the shaft of a putter located?
It is because the shaft of the putter is mostly installed in the heel. The shaft placement is either near the heel or in the center of the club head. Therefore, it is essential to measure the putter differently. The method of measuring the length of a putter is described in the following steps. Step 1.
What is the USGA method?
Method 5: The United States Golf Association (USGA) Method. The USGA method is part of the rule book’s method: “Rules of Golf.”. In it, an apparatus containing an angle iron is used. The angle iron forms a 60-degree angle from the horizontal, and it is also used to stop /hold the iron.