Golf-FAQ.com

what clubs do you use for chip and pitch shots in golf

by Talon Lindgren IV Published 2 years ago Updated 2 years ago
image

Many golfers successfully chip with anything from a 6 iron all the way through a sand wedge. Some even use a chipper, which is essentially a lower lofted club that allows you to use a putting-like motion to hit shots around the green. To become a good chipper, start out with one club like a 9 iron or pitching wedge.

Choose the right club - A pitch shot requires a club with more loft than a chip. You'll want to use anything between a gap wedge and lob wedge. These clubs will get more air underneath the ball and allow a softer landing.

Full Answer

What club should I use to hit a chip shot?

You'll see a shot where there's more rough and fringe to deal with, so this shot will need to fly a bit higher and longer to reach the front of the green. And if you need your chip to fly higher and farther, then you'll need a more lofted club such as a sand wedge.

What clubs do you use for tee shots on the golf course?

Tee shots are hit with a vast variety of clubs from fairway woods to driving irons, to hybrids. Bunker shots are usually hit with a sand wedge, but lob wedge and pitching wedge are also good choices depending on the condition of the sand.

What is a chip shot in golf?

This is an approach where a golfer takes a simple putting like motion and simply bumps the ball about 2-3 yards and let’s the ball roll the rest of the way to the hole. This is the most simple of chip shots and easiest to execute.

What is the best chip shot for higher handicap golfers?

Oftentimes, the higher handicap player will select the Pitching Wedge (48 degree club) and hit a bump and run. This is an approach where a golfer takes a simple putting like motion and simply bumps the ball about 2-3 yards and let’s the ball roll the rest of the way to the hole. This is the most simple of chip shots and easiest to execute.

image

What club to chip and pitch with?

For the average golfer, chipping with a gap wedge will produce the most consistent results when the ball is sitting down on the grass. Having a club with a bit more loft will help pick the ball out of the grass and give you the most control. For most chips, my gap and pitching wedge gave me the best results.

What golf club do you use for chip shots?

For a basic chip, use a 52- to 56-degree wedge. Play the ball center, and get your weight forward so your left shoulder is over your left foot.

What degree club is best for chipping?

What degree wedge is best for chipping? For most golfers, a gap wedge or a sand wedge with loft of between 52° and 56° will produce the most consistent outcome when chipping. This is because you'll be able to play most short-game shots you're likely to come across out on the course.

How do you chip and pitch a golf club?

10:0416:16CHIP V's PITCH - Whats the difference and when to use them - YouTubeYouTubeStart of suggested clipEnd of suggested clipAction my chip shot was very much controlled with the shoulders as we kind of said that was aMoreAction my chip shot was very much controlled with the shoulders as we kind of said that was a shoulder back and shoulder through movement a pitch shot is going to start to introduce.

Can you chip with a pitching wedge?

A pitching wedge can also be very useful for chipping around the green. It's best to experiment with different lofts and clubface orientations to get the trajectory you want, whether it be a low roller or a higher shot with less rollout.

When should I use a pitching wedge?

A pitching wedge should be used when on the fairway or rough for approach shots, or when doing some higher trajectory short pitch shots around the green. They are great for creating spin and distance, while also giving you the control you need to keep your short game tight and accurate.

What is the rule of 12 in golf chipping?

The Rule of 12 In Golf Chipping. The rule of 12 is a golf chipping technique that explains the exact relationship between the loft on a golf club and the amount of roll you will get on a chip shot. We use 12 yards as the total distance we want the ball to carry on the chip.

What is the difference between chipping and pitching?

The chip shot is a one-lever move where more of the shoulders are used without a wrist hinge, whereas a pitch shot is a two-lever movement that includes the trunk and the wrist. Engaging the arms and the wrist allows you to generate more power because you are farther away from the hole.

How do I know which wedge to use?

Know your pitching wedge loft. If it's 45 degrees or less, add three more wedges that are spaced apart by no more than 4-5 degrees each. So generally think about putting in a gap wedge that's 48 or 50 degrees, a sand wedge that's between 54 and 56 degrees, and a lob wedge that's between 58 and 60 degrees.

Do you use a club with little loft or a lot of loft for pitching?

The minimum loft you're likely to find on a pitching wedge is 43 degrees. Unless you discover an antique from the pre-gap wedge days, you probably won't find a true pitching wedge with a loft of more than 50 degrees. A typical pitching wedge today features 45 to 48 degrees of loft.

What is 60 degree wedge used for?

A 60-degree wedge is considered a lob wedge and is mostly used to launch the ball high up in the air and land softly on the green. Examples could be hitting the ball over water or sand and quickly stopping it on the green. I used to have a 60 degree in my bag and it did come in handy in certain situations.

What golf club should I use for 50 yards?

So what clubs can you use to cover the 40-50-yard distance? Basically any of your wedges, including your pitching wedge. Most golfers carry a pitching wedge with around 48* of loft, along with two more wedges somewhere in the range of 52* to 60*.

How to get good at chipping?

The key to great chipping is getting familiar with your clubs. So, practice your chipping with different clubs, and you'll likely start favoring a few clubs over the rest. As you get a better feel for your favorite clubs, practice until you're consistently chipping just onto the green and getting a nice smooth roll to the pin. ...

How to chip around the green?

First, you'll learn a general rule of chipping around the green, which is that you want the ball rolling smoothly on the green as soon as you can. So, if you're a few feet from the green and the grass is tightly mown with no obstacles, go ahead and putt the ball. Here are a few tips for putting from the fringe...

What degree wedge do you need to hit a golf club?

With the speed of greens now and the firmness of the greens if you want to become a serious, quality golfer, then you need a 60 degree wedge or at least a 58 degree. Learn how to hit the club and the game will become easier. It will allow you to attack more pins and play more aggressively. Golfers that played when the greens were softer and slower might try to convince you otherwise, but these clubs are fantastic to learn how to hit. . Be like a kid and spend 2-3 hours around a green with a 60 and use some imagination. You just might be surprised what you have inside of you.

How to play a flop shot?

Option 1: Take the 60 degree wedge and play a flop shot. This typically consists of playing the club a bit forward in the stance with the wedge somewhat open. Aim a bit left (for the right handed golfer) and hit down and through the ball. The ball should pop up in the air and land softly.

What degree is a lob wedge?

Some people will take the approach of using the Lob Wedge (60 degree) in all chipping situations. The philosophy behind this is that a golfer can get very comfortable with one club and turn it into different lofts by the ball positions and where the golfer positions their hands.

What loft is a wedge in golf?

The golfer will more than likely select a wedge in the 52 to 60 degree loft area. This is typically a gap wedge, sand wedge or lob wedge. Once again, the key here is to select a club that provides you with the most confident for solid ball striking.

How far away from the putting surface should a golfer be?

The golfer may only be 2-3 yards away from the putting surface. Situation 2: The chip shot needs a little bit of carry to get to the putting surface, but there is enough green for it to roll out. The golfer may be about 4-8 yards from the green.

How to play a 56 degree wedge?

Take the 56 degree wedge and fly it just far enough onto the green or fringe and let it roll out. The key here is to have soft hands and allow the ball to land softly. It may take opening the club face a bit and remaining patient in the down swing.

How far away from the green should a golfer be?

The golfer may be about 4-15 yards from the green. Situation 4: The chip shot requires some distance to get to the putting surface and there is little not rom for the ball to roll out. The golfer may be about 4-15 yards from the green . We will guide through these different situations and the options that you have for each shot ...

What wedge do you use for a tee shot?

Tee shots are hit with a vast variety of clubs from fairway woods to driving irons, to hybrids. Bunker shots are usually hit with a sand wedge, but lob wedge and pitching wedge are also good choices depending on the condition of the sand. Flop shots and pitch shots are usually executed with a lofted wedge.

How to figure out how far a golf club rolls?

To figure out how far each of your clubs roll lay a landing target on the green. I use a swing plane stick or a golf club and putt it about 8 feet onto the green. Practice landing all of your clubs just over the stick. Pace off and chart how far each club rolls after it hits the green. This will show you the amount of roll that each club will give you and will help you to choose the right club for the distance at hand.

Can you play Tin Cup with a 7 iron?

If you've seen the golf comedy Tin Cup you know all too well that the entire game can be played with a 7 iron. Realistically, the entire game could be played with any one club if you think about it.

image
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9