what cor should i get for a driver in golf

The USGA

ruled that a.83 COR was the maximum they would allow in a driver face for legal tournament play. However, until 2008, the R & A (Royal and Ancient) governing board still allows a driver up to a.86 COR.

Full Answer

What is the maximum COR for a driver in golf tournaments?

The USGA ruled that a.83 COR was the maximum they would allow in a driver face for legal tournament play. However, until 2008, the R & A (Royal and Ancient) governing board still allows a driver up to a.86 COR.

How do I choose a golf driver?

For example, if you hit the golf ball low off the tee, you should find a driver that has a high trajectory rating. Don't think that trajectory rating is the same as loft. For instance, a driver may have a 10-degree loft, but if its center of gravity is toward the front, it will react more like a driver with an 8-degree loft.

What should seniors golfers consider when buying a driver?

Here are a few important aspects seniors golfers should consider before deciding: Slower swing speeds need some assistance in the form of a greater launch angle. While adjustability is handy it is not essential provided you select a driver with the correct angle. The slower your swing speed the more launch angle you need.

What kind of shafts do you need for Your Driver?

Drivers are equipped with graphite shafts usually offered in different flexes. For the majority of golfers, the shaft included with the driver will work just fine. Weight is what you’ll want to pay attention to. You don’t want a shaft that’s too heavy.

What is the current COR in golf clubs?

How does COR affect driving distance?

About this website

How do I know which golf driver to use?

Driver loft, which typically ranges from 8.5° to 15°, should match your swing speed. The slower your swing speed the more loft you should have. If your average swing speed is between 80 and 90 mph (the average for most male golfers) you should be using a driver with about 10.5° to 12° of loft.

What kind of paint do you use on a golf driver?

Enamel paint and preferably epoxy-based enamel paint is highly recommended. Enamel is oil-based, adheres easily to metal surfaces, is highly durable, and, has a gloss finish. Acrylic Paint. This paint is water-based and drys quite quickly and is cheaper than enamel paint.

Should your driver match your irons?

There is no requirement to match your driver with your woods. Brand, club head, shaft, weight and length are all parts which can match but golfers are best focusing on the combinations which deliver the best results for each club individually. The only exception is the grip which should be the same.

Should I set my driver to fade or draw?

If the number is negative, that means the ball is curving more right to left (draw). A positive number would indicate a fade, and the closer you are to zero, the straighter the ball flight....Fade and Draw Settings (moving center of gravity)Driver SettingSide SpinFade96Neutral-341Draw-667

Can I spray paint my golf driver?

Yes. You can easily repaint your golf club heads at home. First, you will have to remove any existing paint from the heads. You can apply a paint remover and let it soak for a few hours before removing the old paint with a sharp object.

Can I spray paint my driver?

The most important things you will need are spray paint, a clear coat, and masking tape. The paint you use is best if it also has a primer in it. If you don't choose something with a primer, then you are going to need to buy an additional paint to prime with.

Should my 3 wood shaft be the same as my driver?

Your fairway wood shafts should be slightly (5 to 15 grams) heavier than your driver shaft. So if you are playing a 65 gram driver shaft (noted by a numeral 6. 65, or some other designation on the shaft decal), your fairway woods should be 70 to 80 grams.

Do you hinge wrists with driver?

3:127:25Hinge To Boost Your Driver - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd you see the 90 degree angle this is an exaggerated hinge position for the driver. Usually forMoreAnd you see the 90 degree angle this is an exaggerated hinge position for the driver. Usually for the driver.

Why do I hit my driver better than my irons?

There is a myriad of reasons why you hit your driver better than your irons. However, the root cause for most golfers stems from posture, the position of the ball in your stance, and your swing plane. Plus, the optimal ball speed and forgiveness produced by a driver make it easy to launch.

What loft should your driver be?

The ideal driver loft depends on your swing speed and the attack angle. Average players that swing the club less than 95 MPH will likely find that a 10.5-degree driver performs the best. Better players who can control their drives and want the most distance will lean more towards a 9-degree driver.

Should I change the loft on my driver?

Lower lofts can provide more energy transfer at impact because there's less of an oblique angle. It's why your 7-iron flies farther than your 8-iron. In our test, drivers with less loft consistently produced more ball speed, even for low swing-speed golfers (3.2 mph more compared to the 10.5 and 12-degree drivers).

Does adding loft to a driver open the face?

When you lower the loft of a golf club, you are also going to close the angle of the clubface. If you increase the loft on a club, you will open the face angle on the club. This applies when you are adjusting loft on the driver as well as irons or hybrids.

highest cor irons and more? - WRX Club Techs - GolfWRX

Golf Jobs Driver: Titleist TS3 9.5 w/ Tensei Blue 55 S 3W: Titleist 915F 15 w/ Diamana D+ 80 S 3H: Titleist 915H 21 w/ Diamana D+ 90 S Irons: 4-GW Titleist T100 w/ Project X LZ 6.0

Hot Drivers and COR | Golf Channel

By FRANK THOMAS1/31/06 -- There is no limit on the COR for drivers, other than in championship play, in countries under the jurisdiction of the R&A.

What is the rule for golf clubs that are straight?

The rule requires that a shaft must be straight. If it is accidentally bent in the normal course of play (not in anger) the player may continue to use it for the remainder of the round even though it does not conform, or the club may be repaired without delaying play.

Why do you cover your golf clubs?

The only reason why anybody covers (head covers) their clubs is to protect them. Generally the putter and the woods are more likely to get dinged than the irons and this is the only reason for covering (protecting) them, not to keep a hot driver hot.

Why do wood clubs have head covers?

Wood head covers were originally designed for wooden clubs for the same reason i.e. to protect the fine finish and thus prevent them from absorbing moisture. With todays oversize metal heads it is becoming more difficult to find a big enough head cover that is easy to put on and take off.

Who is the golf channel chief technical advisor?

Editor's Note: This is the latest in a new weekly feature from Golf Channel Chief Technical Advisor Frank Thomas. To submit a question for possible use in this column, email [email protected]

How fast should a golf ball go to fade?

But the distance problem is probably the incorrect launch conditions. You ball speed should be close to 130 mph and a launch angle of about 13 to 14 degrees and the spin rate of about 3,000 rpm.

How much loft do you need for a golf driver?

If your swing speed is over 100 mph and you hit the golf ball a long way, you should have a driver with a loft of about 12 degrees, or less , and that will produce less backspin. But if you are like most golfers with swing speeds that are below 90 mph, you will need a more lofted driver that increases that backspin to keep the ball aloft.

Is trajectory rating the same as loft?

Don't think that trajectory rating is the same as loft. For instance, a driver may have a 10-degree loft, but if its center of gravity is toward the front, it will react more like a driver with an 8-degree loft.

What does COR mean in golf?

One such acronym that has been a buzzword since 1998 in the golf equipment industry is COR – Co efficient of Restitution. Experienced golfers know the COR is a number which represents how “hot” ...

Why do higher COR clubs not work?

Higher COR clubfaces do not work in the manner of a spring. In the collision between the clubface and the ball, there is always some energy lost. This is because of several reasons but mainly due to the face flexing inward while the ball is compressed against the face. Both actions result in a loss of energy.

What does a high COR mean?

Hence a high COR means more distance regardless of your clubhead speed. If you like math and you’re interested to know more about the relationship of the factors that control ball speed as a result of impact or how much more distance you can get with a higher COR clubhead, here is the tried and true mathematical relationship between all ...

What does a COR of 0 mean?

Thus a collision which yields a COR of 0 means no energy is transferred between the two objects while a COR of 1 indicates a perfectly elastic collision in which all energy is transferred from one object to the other. The COR rule also became known as the “spring face rule.”.

Is a higher COR clubface a spring?

This term is misleading because in fact, a higher COR clubface does not really act like a spring. When you think of a spring face, it is logical to think the ball causes the clubface to flex inward, and upon flexing back out the ball is propelled as in the manner of a trampoline sling-shotting a gymnast upward.

What is the best driver for golf?

For someone who hits the course or driving range only occasionally, a high quality alloy driver can be found at a reasonable price. A titanium driver, or multi-material driver like titanium and composite, that combines light weight and excellent strength is more expensive and for golfers who play more consistently.

How many yards does a golf driver drive carry?

Weight is what you’ll want to pay attention to. You don’t want a shaft that’s too heavy. As far as flex, if your drives carry between 230-250 yards, a regular flex is best for your game.

Why do golf clubs swing sideways?

Many golfers think they’re not good enough to get custom-fit clubs, that the flaws in their swing will override any potential benefits of clubs built just for them, but fitters say the reason many players hit it sideways is because they haven’t been custom-fit. Trying to swing golf clubs whose length, weight, lie angle, shaft flex or grip size don’t match the body encourages players to make unnatural compensations that prevent them from developing proper mechanics. Choosing this type of driver will cost you a little more time and money, but it ensures you’ll get a perfectly-fit driver.

What is driver loft?

LOFT. Loft is the amount that the face of the club slopes back. Driver loft, which typically ranges from 8.5° to 15°, should match your swing speed. The slower your swing speed the more loft you should have.

How long is a standard driver?

No standard length exists for a driver. Every manufacturer offers different models with varying lengths (usually 43.5” to 47”) but drivers continue to get progressively longer, with some even reaching 48” (the maximum allowable). That’s because in most cases, the longer the shaft the faster the head will travel.

Can you adjust the face angle of a golf club?

Using only a wrench, golfers are now able to adjust the face angle, loft and lie angle without the help of their local club fitter—or having to buy a new club altogether. Golfers can alter the club dynamics to suit their desired ball flight or pick up a few additional yards of carry. Many manufacturers insist an adjustable driver gives you every advantage. However, others disagree, citing a more expensive price tag, additional weighting in less than ideal locations, and confusion about all the different setting combinations as reasons to play a traditional, non-adjustable driver.

Can you custom order a driver?

Many drivers can also be custom ordered. Customers can select a custom shaft and grip, as well as length fit to them. All custom orders are placed directly with the manufacturer and assembled by the experts that make the clubs. This is a great option if you have been custom fit for a driver.

Does the CT test always mimic the response of a golf ball?

Olsavsky’s gripe is that the CT test doesn’t always accurately mimic the response of a golf ball. “When you’re pinging [the steel ball in the CT test] a half-inch or more off-center, you get a higher response,” Olsavsky says.

Is it illegal to use a CT test on a golf club?

Therefore, any golf club that measures higher than 257 milliseconds on the CT test is deemed illegal. The CT test, being that it’s just a small pendulum device, is “really easy to use,” according to Olsavsky. Actually, some OEM Tour Trucks that travel to PGA Tour events each week have a CT testing setup right in their truck.

Who is the best driver for seniors?

You will find the best driver for seniors. Nick Lomas. Nick Lomas is the founder of GolfSpan, an avid golfer, not quite a pro but has over 15-years of experience playing and coaching golfers from all over the world.

What does lighter head mean in golf?

Weight distribution. Again, this will vary from player to player. A lighter head or club generally translates into higher clubhead speed and therefore more distance. Optimal head weighting, however, also affects your launch and contributes to the forgiveness of the driver.

Does a longer shaft give more distance?

While longers shafts potentially deliver greater distance the also reduce control. There is no perfect balance, it depends on the individual and their swing. Take the time to study your swing style and speed in order to determine the ideal shaft length for your game.

Can you play golf in your golden years?

Conclusion. One of the many great things about golf is that you can normally continue to play in your golden years. Obviously, you are not as fast or as fit as you were in your 20s or 30s but you can still play a respectable and enjoy able round of golf. What is important is that you select your equipment carefully.

Does adjustability help with slower swing speed?

Slower swing speeds need some assistance in the form of a greater launch angle. While adjustability is handy it is not essential provided you select a driver with the correct angle. The slower your swing speed the more launch angle you need.

What is the current COR in golf clubs?

The current limit to COR in golf clubs is 0.830, if a club is tested above this it would be ruled non-conforming. This means the club cannot transfer more than 83% of its energy to the ball.

How does COR affect driving distance?

How does COR effect driving distance? Whenever you hit a shot there is always some energy lost when the club hits the ball. At impact the ball is compressed against the clubface and can squash up to 30% of its diameter against the driver face. This is where the energy is lost.