Golf Clubs Loft Comparison Table
| Driver | 3-Wood | 5-Wood | 5H | |
| Mizuno MP-20 HMB | ||||
| Mizuno JPX FLI-HI | 22.5° | |||
| Mizuno CLK Hybrids | 23-27° | |||
| Mizuno ST-Z Woods | 9.5°, 10.5° | 15° | 18° |
What is the difference between 3 wood and 4 wood?
A 4 wood is not as popular as the 3 wood and 5 wood, but still has a lot of features that can boost your golf game. Compared to the 3 wood which has a loft of 13 degrees, the 4-wood club has a higher loft of 16 degrees. The higher degree of loft on the 4 Wood makes it swinging easier and also and adds more height to the golf ball.
What does wood size mean in golf clubs?
Wood sizes also indicate relative length in the set. For example, a strong wood has a similar loft angle to the club just below it, with the same relative shaft length. This spells better control for many players. In general, the fairway woods start with angles as low as 13 degrees and as high as 22 degrees.
What is the degree of loft on golf clubs?
The degree of loft on golf clubs helps separate them from each other as the loft influences the flight and distance of shots. A lower loft hits the ball further whilst a higher loft launches the ball up into the air with more spin.
How many degrees is a 3 wood loft?
You can expect the 3-wood to have a loft between 13 and 15 degrees. 5-woods will have lofts of 17 to 19 degrees. And 7-woods top out between 20 and 22 degrees.
How many degrees should you have between fairway woods?
You can expect the 3-wood to have a loft between 13 and 15 degrees. 5-woods will have lofts of 17 to 19 degrees. And 7-woods top out between 20 and 22 degrees. The other fairway wood, the 4-wood, fills the gap between the 3 and 5-woods with a loft angle between 16 and 18 degrees.
What are the degrees of golf woods?
Most golfers will carry a 3-wood and the standard 3 wood loft is around 15 degrees. Many players will carry a strong 3 wood at around 13-13.5 degrees of loft if it is a club that they want to go as far as possible or like using off the tee. Manufacturers also bring out high launch 3 woods up to 16.5 degrees.
What loft should my woods be?
So Which Fairway Wood?Degrees of LoftDescription and Notes13 - 14A 'Strong' 3. Slightly lower loft than a normal 3 - slightly lower trajectory15 - 16Classic fairway 3 wood16 - 17Strong 4 - A slightly easier, shorter 3 wood17 - 184 wood. Safer than a 3 wood, longer than a 55 more rows
What is the difference between woods in golf?
The woods generally feature longer shafts and less-lofted clubfaces; therefore, they hit the ball farther but are harder to control than irons. Woods are normally used off the tee box for maximum distance, but can also be used from the fairway or rough when you have a long way to go to reach the green.
What's the difference between a 5 wood and a 3 hybrid?
Differences Between a 5 Wood and a 3 Hybrid A 5-wood and 3-hybrid share a similar loft profile and lie angle, which in theory would produce the same result. However, hybrids feature a shorter shaft than a 5-wood and a clubhead with increased offset to promote straighter shots.
How far does a 15 degree 3 wood go?
Fairway woods generally range from a 3 wood through to a 7 wood. The 7 wood typically has a loft of around 25 degrees, with a 3 wood loft around 15 degrees....What are the lofts of fairway woods?Driver8-13 Degrees3 Wood12-17 Degrees4 Wood15-19 Degrees5 Wood20-23 Degrees7 Wood25-28 Degrees
When should I use 3 wood or 5 wood?
Should You Get A 3 Or 5 Wood? The majority of golfers will hit more fairways and greens with a 5 wood compared to a 3 wood. A 5 wood has a slightly shorter shaft and more loft, and because of that, it makes it much easier to hit from the fairway.
How much does 1 degree of loft affect distance?
How Much Does 1 Degree of Loft Affect Distance? Given that you're at your maximum clubhead speed, just 1-degree change in the loft angle of a golf driver can affect your driving distance by 2-4 yards.
When would you use a 7 wood in golf?
Players with slightly slower swing speeds that are looking for a go to club from the fairway to approach a green should choose the 7 wood. The 7 wood is very easy to launch and will make attacking a green a much easier job.
What is the difference between a 5-wood and a 5 hybrid?
A 5-wood could be in there as an option for an easy to hit wood. A 5-iron because it's part of a set of matching irons. A 5-hybrid because it's easier to hit than the 5-iron from tricky situations (like hitting out the rough, or maybe a fairway bunker) while offering a different ball flight to a 5-iron.
What's the difference between a 3 wood and a 3 hybrid?
The main difference between the 3 wood and 3 hybrid is that the 3 wood is used for longer distances, where as the 3 hybrid is better for more precise shots. Fairway woods are generally referred to as woods in common terminology, and they are used for shooting from the fairway.
Does a 5-wood go further than a 3 hybrid?
1:0611:10SHOULD YOU PUT A 5 WOOD OR 3 HYBRID IN THE BAG? - YouTubeYouTubeStart of suggested clipEnd of suggested clipWe can see the five wood much longer from front to back than the hybrid. So that's where the centerMoreWe can see the five wood much longer from front to back than the hybrid. So that's where the center of gravity is gonna be a little bit further back in the head.
What is an 11 wood equivalent to?
The 11 wood golf club replaces your 5 iron. This club helps in delivering straight and long shots off the tee. The 11 wood is best used on short par 4's, in the rough, bunkers, and fairways.
What is a 13 wood equivalent to?
Thomas Golf Fairway Woods Loft ChartClubEquivalent to ourHead Material13 Wood6 IronStainless15 Wood7 IronStainless17 Wood8 IronStainless19 Wood9 IronStainless10 more rows
What is a 7 wood equivalent to?
In terms of loft, a 7-wood is comparable to a 3 iron, typically featuring 21-22 degrees. Compared with 3-woods or 5-woods, this offers a much higher ball flight. The length of a 7-wood is typically 40-42 inches, which is about an inch smaller than the average 5-wood.
What's the difference between a 3 wood and a 5 wood?
Loft is the primary difference between fairway woods. 3-Woods are lower lofted options (our standard loft is 15°, and we also offer a 14° Rocket model for added distance), while 5-woods start at 19°. As you may guess, the added loft is beneficial for getting the ball airborne with greater ease.
What is the degree of loft in golf?
The degree of loft on golf clubs helps separate them from each other as the loft influences the flight and distance of shots. A lower loft hits the ball further whilst a higher loft launches the ball up into the air with more spin. There really are no set lofts of golf clubs these days, with manufacturers bringing out clubs at all different lofts ...
How many degrees are 3 irons?
3 irons are usually around 21 degrees, equivalent to a 7 wood or 4 hybrid. The loft of a 3 iron tends to be around 21 degrees, equal to a seven wood or 4 hybrid. They are more common than 2 irons but many golfers still prefer to use a hybrid as they are easier to hit.
What is the loft of a lob wedge?
The loft of a lob wedge is traditionally 60 degrees, however some players will carry 58 degree wedges, which can also be classed as a lob wedge. Players like Phil Mickelson have lob wedges as lofty as 64 degrees.
What is the loft of a driver?
A driver loft is traditionally somewhere around the 10 degree mark although there are plenty of exceptions. Bryson DeChambeau’s driver loft is 5.5 degrees although most better players will have somewhere between 8-10.5 degrees of loft in their driver.
How much loft does a 2 iron have?
2 Iron Loft. A standard 2 iron comes in at 18 degrees of loft, which is equal to the loft of a five wood. These clubs only tend to be in the very best ball strikers’ bags, with amateur golfers opting for 2 iron utilities, fairway woods or hybrids.
How many degrees does a hybrid loft come in?
Hybrid Loft. There really is no set hybrid loft, with hybrids coming in anywhere from 16 degrees all the way through the bag with some beginners and higher handicaps using hybrid irons. Most tour players with hybrids in the bag will have them between 18-22 degrees to replace their 2 and 3 irons.
What is the pitching loft of a wedge?
Pitching Wedge loft. A pitching wedge loft is usually between 45-47 degrees, with most golfers using one that comes with their iron set. However, better players like to use a traditional wedge instead of the one that comes with the set to help with control and spin.
What is the best angle for a fairway wood?
In general, the fairway woods start with angles as low as 13 degrees and as high as 22 degrees. That’s if you include the 7-woods in the picture. You can expect the 3-wood to have a loft between 13 and 15 degrees. 5-woods will have lofts of 17 to 19 degrees. And 7-woods top out between 20 and 22 degrees. The other fairway wood, the 4-wood, fills ...
What is a strong wood?
A strong wood has a slightly lower loft than the standard wood of the same number. This results in a slightly lower, but longer shot than its regular counterpart. Wood sizes also indicate relative length in the set. For example, a strong wood has a similar loft angle to the club just below it, with the same relative shaft length.
How many fairway woods are needed for a golf bag?
For most players, a golf bag isn’t complete without at least one fairway wood. One is often all you need, but choosing the right one is up to you. If you need more loft and less shaft, pick a 5 or 7. Otherwise, look at the 3 and 4.
What is 7 wood?
Depending on who you ask, the 7-wood is a mix between a fairway and a utility wood. For our purposes, we’ll consider a low-loft 7-wood a fairway.
What is fairway wood?
What is a Fairway Wood? Golfers use fairway woods on the fairway (hence the name). Easy to control, the clubs have high enough loft to pop the ball in the air without using a tee. Some manufacturers and players consider any “wood” a fairway wood. But this elite group generally includes the 3, 4, 5 and 7-woods.
What is a wood in golf?
Wood (golf) An Adams Insight BUL 5000 460 cm 3 9.5° (left), an early 1980s Pinnacle Persimmon driver (right). A wood is a type of club used in the sport of golf. Woods have longer shafts and larger, rounder heads than other club types, and are used to hit the ball longer distances than other types. Woods are so called because, traditionally, they ...
How much loft is a 3 wood?
The average 3-wood has a 13-16 degree loft (typically 15°) and the average 5-wood has an 18-21 degree loft. Higher lofts than that overlap with irons in distance, but many players prefer high-number woods to low-number irons wherever they can be used as the wood is easier to hit than a "long iron".
What is fairway wood?
Fairway woods are typically made with a slightly shorter and stiffer shaft, a smaller clubhead and more loft than a driver or 2-wood. While the most common modern clubset includes only one fairway wood, the 3-wood, woods are typically available from major brands in lofts up to a 9-wood.
What is a wood clubhead?
The head of a wood is roughly spherical in shape with a slightly bulging clubface and a generally flattened sole that slides over the ground without digging in during the swing. Traditional "wood" clubheads were made of wood, hence the name; beech wood or ash were common prior to the twentieth century, and later persimmon or maple became preferable. Modern club heads are usually hollow steel, titanium or composite materials, and are sometimes called "metalwoods" or more recently "fairway metals". Pinseeker Golf Corp. innovated the first stainless steel metalwood called the Bombshell in 1976. The design was somewhat untraditional and did not have the promotional success needed for profitable long term marketing - it was discontinued 3 years later. In 1979 Taylor Made produced a traditionally shaped stainless steel wood head called "Pittsburgh Persimmon" which achieved market acceptance by the mid-1980s. Oversized heads made from aluminum appeared in the mid-1980s but were slow to catch on since their introduction was via independent component manufacturers and not the larger endorsement based club manufacturers. Very large size drivers (300-500cc) arrived with titanium metallurgy which meant reasonable 'headweights' could be achieved with very large thin shelled but strong structures. By the mid-2000s, titanium heads could be made to 1000 cc (Golfsmith Inc made 1,000 cc (61.0 cu in) in the mid-2000s). Around this time the USGA decided to limit the size of driver heads to 460 cc (28.1 cu in) since the rule requiring heads to be of a traditional shape was being unduly stretched. However, during this period the club-making business needed some financial help, so the USGA relaxed the "traditional shape" rule while enforcing the new 460cc limit, and new head shapes appeared, such as "torpedo" and square/rectangular shapes, to attract the buying public to potentially game improving designs particularly regarding better mishit outcomes.
What is a strong 2 wood?
A Strong 2 Wood. Higher-number woods are generally known as fairway woods and , as their name suggests, are designed for shots from off the turf of the fairway that still require long distance, such as the second shot of a par-5 or a long par-4 hole.
What is the best material for a golf club?
Today, many metal wood clubfaces (and most driver clubfaces) are constructed out of titanium. Titanium has a higher strength to weight ratio than steel and has better corrosion resistance, so it is an ideal metal for golf club construction.
What is a 25 wood club?
Some custom clubmakers offer woods in lofts up to 55° (a "25-wood" equivalent to a sand wedge); these can be used to replace the entire standard set of irons with woods, for players who prefer the swing mechanics and behavior of woods to that of irons and wedges.
What is a 14 degree fairway wood?
In essence, a 14-degree fairway wood is a weakened 2-wood or strengthened 3-wood. ‘.
What is loft in golf?
Loft. It is advisable to take advantage of any assistance you can get. One such area to consider is the degree of loft. The lower the loft of your fairway wood is, the more difficult it is to get the ball in the air, which will cost you distance. It is for this reason that Golf Digest’s Mike Stachura recommends that you pick a wood ...
How far can a 3 wood go?
While the best male golfers in the world can hit their 3-wood over 300 yards nowadays, most golfers merely need to maximize how far their 3-wood goes. Average golfers who swing their 3-woods around 70-80 miles an hour should be able to carry the golf ball 220-240 yards.
How many yards should a 5 wood golf ball carry?
Since a 5-wood has more loft than a 3-wood, it should carry about 8-10 yards shorter for the average golfer. Therefore, players with average swing speeds should be able to carry the golf ball 190-210 yards.
What is the best material for fairway wood?
Lighter than steel, titanium is a great material for the face of the fairway wood. Thinner faces provide more spring-like affect, which produces more distance than a standard steel clubface. Also, less weight in the clubface allows the manufacturer to place that weight lower and behind the face, which increases stability and forgiveness on off-center hits.
Why use graphite shafts in fairway woods?
The most important reason why fairway woods utilize graphite vs steel shafts is that lighter shafts are easier to swing faster.
How to choose fairway woods?
Here are a few key things to remember: 1 The best fairway woods are ideal for tee shots on short par-4s, reaching par-5s in two shots, and hitting high, soft approach shots into long par-4s. 2 Extensive testing and fitting will help you find the right mix of fairway woods with the proper loft, shaft flex, and lie angle. Even if you buy your clubs online, it’s a smart choice to get fitted. 3 If you’re a high handicapper, you want fairway woods with a low center-of-gravity and a wide sole. 4 Having adjustability is a great option to handle a variety of different golf course and weather conditions. 5 Fairway woods can be used in tightly-mown areas around the green, providing even more versatility.
Why are fairway woods shallower than drivers?
The face of fairway woods are much shallower than a driver, which keeps the center of gravity lower, allowing you to get the ball airborne from the fairway or rough. Some fairway wood soles are designed to make it easier to hit them from divots or heavier rough. This is something you won’t find in a modern driver.
What is the difference between links and golf?
Links-style golf courses tend to be played with lower shots that run along the ground, while traditional courses require shots that fly higher and land softer in the fairway and on the green. If you play golf courses that require softer landing shots, you want as many fairway woods as your bag will allow.
What are the different types of golf clubs?
The main types used in the game of golf are: putters, wedges, woods and irons. The clubs vary according to the club length, lie angle and loft.
How far can a golf driver hit in a gale?
According to independent sources, PGA pros hit their drivers ranging from 280 to 320 yards on average. LPGA pros hit 230 to 270 yards on average .
What does it mean when a golf swing is different?
To put it lightly, every single golf swing is different which therefore means every single swing has different needs in terms of the amount of loft in each club. Course conditions also play a part here.
What degree loft should a putter be?
What Degree Loft Should Your Putter Be? Traditionally, the standard loft on putters is three to four degrees however out on Tour there is something called ‘effective loft’ which is the goal of delivering the putter with three or four degrees of loft at impact. Related: What Loft Should Your Putter Be?
How many degrees of loft does a three iron have?
In the longer irons a three-iron usually comes in at around 20 degrees, a four-iron at roughly 25 degrees and a five-iron at 29 degrees of loft. A six-iron is typically 31 degrees, a seven iron is usually around 34 degree and then the eight and nine-irons often come with 37 and 41 degrees of loft respectively.
How many degrees are fairways?
Usually fairways range from 13-19 degrees but there are also professional golfers who use seven-woods which can be as high as 24 degrees. Once again, there is no right answer here aside ...
What is the best way to replace fairway wood?
Hybrids and utility irons have become one of the best ways in bridging the gap between fairway woods and the longer irons in the bag. Sometimes they also replace fairway woods so they can be lofted from 17 degrees to as high as 25 degrees to replace the five-iron in some bags.
Why do golfers use 4 woods?
Many golfers have a 4 wood in their bags specifically to address the gaps in the distance on course. For everyday golfers, the 4 wood carries greater significance. If you want to hit a shot off 225 yards, then 4 wood is a good choice. It is a better fit in contrast to other clubs from distance gap points.
What is a 4 wood golf club?
The 4-wood is a golf club that has 16 degrees of loft. A 4 wood is not as popular as the 3 wood and 5 wood, but still has a lot of features that can boost your golf game. Compared to the 3 wood which has a loft of 13 degrees, the 4-wood club has a higher loft of 16 degrees. The higher degree of loft on the 4 Wood makes it swinging easier ...
How far can a 4 wood golfer hit?
There are three types of golfers on the course and the distance covered by the 4 wood varies with each hitter. A short hitter can cover 175 yards on the course with a 4 wood. A mid hitter can hit a shot that goes off 200 yards. A long hitter can also cover the same distance of 200 yards as the mid hitter.
How long is a 4 wood?
The length of the 4 wood is 43 inches. The 4 wood also comes under the category of a fairway wood. Golfers use a fairway wood on the fairway as it is easier to control and can be shot in the air without using the standard tee. The 4 wood is also considered to be the hardest one to find among all the fairway woods.
How far can you cover with 4 wood?
The 4 wood works smoothly off the deck and can easily cover about 225 yards. The greater distance off the tee is also due to the increased accuracy of the shot with the 4 wood. For example, on a course that’s 6630 yards long; using a long wood works fine. The 4 wood gives more attack par 5’s or maybe a few par 4’s.
What is the difference between 4 wood and 4 iron?
This means that it can result in high shots and can cover more distance on the course. The 4 iron mostly has a graphite shaft and greater soles to keep it from digging in the course. The 4 iron is more stable of the rough than the 4 wood.
How far can you hit a 4 wood and 2 iron?
The 4 wood and 2 iron can have a significant difference in the distance, depending on the shot played. The 4 wood can be hit over 230 yards, and the 2 iron can cover a maximum of 2 iron on courses. It depends on the accuracy of the shot to determine the distance covered.
Overview
Design
The head of a wood is roughly spherical in shape with a slightly bulging clubface and a generally flattened sole that slides over the ground without digging in during the swing. Traditional "wood" clubheads were made of wood, hence the name; beech wood or ash were common prior to the twentieth century, and later persimmon or maple became preferable. Modern club heads are usually hollow steel, titanium or composite materials, and are sometimes called "metalwoods" or more rec…
Drivers
The 1-wood, or driver, is the lowest-lofted, longest, and often lightest club in a player's bag, and is meant to launch the ball the longest distance of any club. Originally, the driver was only slightly larger than any other wood and was designed to be used from the tee or the fairway, but with the advent of hollow metal clubhead construction, the driver has become highly specialized for use off the tee by incorporating an oversized head and a deep striking face to maximize the "sweet s…
Fairway woods
Higher-number woods are generally known as fairway woods and, as their name suggests, are designed for shots from off the turf of the fairway that still require long distance, such as the second shot of a par-5 or a long par-4 hole. They have two important features: a higher loft to lift the ball out of the turf and over low obstacles like hills, and a shallower face height which allows a player to hit a b…
Construction
The shaft is the true engine of the wood. Widely overlooked, the proper shaft increases distance and accuracy, while a poor shaft can lead to inconsistent shots, slices, and reduced distance.
The oldest shafts for all golf clubs were made of Hickory wood. The shaft was whippy and light, but inconsistent in flex from club to club and quite fragile. Beginning in the 1920s, steel shafts started making an appearance, though the USGA and R&A did not allow their use in sanctioned tourname…
External links
• http://golfworldscottsdale.com/2016/08/10-best-golf-putters-2016/