How to clean golf club heads – e.g. irons
Fill a bucket with warm water and fill the bucket just enough to cover your club heads. Do not use hot water as it may loosen the club head from the shaft through the ferrules which join the two together.
How to clean metal woods
For metal woods e.g. drivers and fairway woods , the cleaning process is different, as these kinds of golf clubs should not be submerged in water.
How to clean wooden clubs
Golf clubs that are made from wood are much more fragile and tend to be much older than those that are made from metal. These clubs should not be dipped in water either, and they should definitely not be scrubbed with a brush. Follow these steps to clean your wooden golf clubs.
How to clean golf club shafts
It’s important that you don’t neglect the golf club shafts after you have cleaned your golf club heads. Golf club shafts can be prone to dirt too. To remove the any dirt, you must use a damp cloth to clean and clear any grime from the shaft and then dry it thoroughly with a towel.
How to clean golf club grips
The grips of a golf clubs are very important as they can easily get dirty and worn from sweat. Be sure to clean your golf club grips often, preferably after each time you play. It is a simple method – get a damp cloth and wipe it over the entire grip’s surface and then rinse with water, making sure it’s not hot as this could damage the grip.
Why do you need to clean your golf clubs?
The largest benefit of cleaning your clubs is that it will make for much better contact between the ball and the club. The grooves on your golf club and the dimples on the ball need to interact with each other to get the proper ball flight and response out of your shot.
How to get rid of rust on golf clubs?
If you notice some rust starting on your golf clubs, vinegar is also a great way to get rid of it. If the situation seems pretty bad, making a paste with vine gar and baking soda and letting it sit on your club for a few minutes can really change the way the golf clubs look.
What material is a driver made of?
Your driver is likely made from titanium material, which makes it much more sensitive to scratching. When you clean a driver, you are going to have to be quite a bit more careful than you are with the irons and wedges. When you are cleaning your irons simply dip your driver’s head in a bucket of warm soapy water.
What is a golf brush?
Brush – A brush allows you to clean the grooves of your face effectively. You can purchase one designated for this task such as the Frogger BrushPro Golf Brush with a 2.5ft retractable cord and offers two brush heads, 1 made with nylon and phosphorous bronze and the other is 100% nylon. It also has a golf club groove sharpener if they start ...
Can you use vinegar on steel shafts?
Sometimes; simple wiping is not enough if your steel shaft is showing signs of rust. In this case, you can use a little vinegar and a 000 or 0000 steel wool. Any steel wool rougher than this can possibly scratch the shaft.
Is it fun to play golf?
Playing golf can be fun, but for you to continue enjoying that fun you need to adopt a habit of properly maintaining your equipment. Maintenance, in this case, involves both washing and replacing worn out parts. Knowing the proper methods of how to clean your clubs will keep your set in the best condition to perform well and last for many rounds.
Does Coca Cola rust?
Coca-Cola has the ability to dissolve rust, but can also damage the club if left exposed for long periods of time. It is best to soak the club in Coca-Cola for only a few minutes at a time. Again, use a small brush to scrape clean the rust.
How to clean rust off golf clubs?
A quick soak can easily loosen surface rust and allow your club to be cleaned using a brush.
Can steel wool be used on golf clubs?
Steel wool and wire brushes can be helpful in removing surface rust. However, used improperly these products can damage the surface of a golf club. Be sure to use a wire brush made of a material less strong than the material of your club. Likewise, starting off with ultra-fine steel wool will ensure you do not scratch or damage your clubs.
What is pitting corrosion?
Pitting Corrosion. Often, surface rust can lead to further corrosion. The most damaging is called pitting corrosion. This is localized corrosion that results in holes or divets in the metal surface. While it is possible to remove the rust from the surface of these divets, it is very difficult to repair them.
5 Easy Step – How to Clean Golf Clubs Correctly
Every golfer knows that cleaning up your golf clubs is essential. Because it will keep the golf club durable and you can use it for a long time. Now, you’ll find many effective ways to do that.
How To Clean You Golf Clubs Video Instruction
You should clean woods or hybrids more carefully. You should avoid submerging persimmon woods or even metal woods into the soap water because metal woods comes with a pretty much glossy finish.
Final Words
Cleaning the club properly is essential for every golfer. In this comprehensive guide, I tried to bring all information in one place to let you know how to clean old golf clubs in the right way. I believe, after reading this guide, now you know every secret of how to clean your golf clubs.