Starts to the left (for a right-handed golfer) of the target line and continues traveling left in a straight line, ending up left of the intended target. The pull shot starts left and stays left, but does so traveling in a straight line. If there's a divot, it will be pointing left of your target line.
Full Answer
What is a golf shaft?
Either way, the golf shaft is where power is stored and released at impact. Sitting in between the golf grip and club head, a solid connection is what allows the golf shaft to do its job. So when choosing a shaft, it's important to know what specifications to look for.
What is the butt end on a golf shaft?
On the opposite side of the shaft is the butt end. This is the side where the golf grip will be installed. The butt diameter is measured about 2" down from the top of the shaft. For standard size shafts for adult players, this will usually be around 0.600", (or larger if it's a bubble shaft).
What is the shaft on a truck?
The shaft is similar to the transmission of a car. While it’s not the engine, it’s still extremely important. If you are driving a truck you want a transmission that can handle its particular demands.
What do the numbers on golf shafts mean?
When buying a golf shaft, you’ll see many different numbers in the name of the shaft. For example: These numbers are the weight of the shaft in grams. Shaft weights typically range between 50 grams and 85 grams with the 50-60 numbers being pretty common as seen in the example shafts above.
What is shaft pull golf?
1:5514:27pulling a golf shaft - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo what's in a golf shaft pull well there's really two types there's a steel shaft pull and there'sMoreSo what's in a golf shaft pull well there's really two types there's a steel shaft pull and there's a graphite shaft pull and you can do them differently.
Do you lose distance with a shorter driver shaft?
The long and the short of it Your current length may be perfect for you. You may even need a longer one. But, as our experts and test have shown, a good number of golfers would benefit from a shorter shaft. You may actually increase distance and there's a good chance you'll hit more fairways.
How do you use a shaft puller?
2:226:40pulling a graphite shaft 2016 - YouTubeYouTubeStart of suggested clipEnd of suggested clipQuick. Okay after we put the heat to it you want to put it into the puller really fast and then youMoreQuick. Okay after we put the heat to it you want to put it into the puller really fast and then you want to hold on to the head that you just got out.
How do you determine the flex of a golf shaft?
Some General Guidelines About Shaft FlexTake a look at the distance you hit your driver. ... If you have a very smooth swing, you might benefit from a softer flex even if you swing fast. ... If your drives go left, you might benefit from a stiffer flex; if your drives go right, you might benefit from a softer flex.
Are shorter driver easier to hit?
It is easier to hit the center of the clubface with a shorter club than a longer club, therefore if you feel like you are struggling with your current driver here's a few things you can try before you cut that driver down or order a new one.
How long should your driver be based on height?
Driver Shaft Length Based Solely on HeightHeight (feet/inches)Driver Shaft Length5'4″-5'7″45.5″5'2″-5'4″45″5'0″-5'2″44.5″4'10”-5'0″44″6 more rows•May 9, 2021
Can you reuse a golf shaft?
However, if the shaft tip stays intact, take a closer inspection of the tip section to see if you notice any longitudinal cracks or delaminating, or basically anything that you think would be considered damage. If not, there is a good chance you could reuse the shaft into another head or the same head later on.
How do you pull a fairway wood shaft?
1:054:56Club Building 101: Pulling a Shaft from a Bonded Driver - YouTubeYouTubeStart of suggested clipEnd of suggested clipGet it set up. And you'll see that it's already starting to push the ferrule. That's fine startingMoreGet it set up. And you'll see that it's already starting to push the ferrule. That's fine starting to really mush. It.
How do you make a golf shaft puller?
0:296:43Build your own golf club shaft extractor - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd put four bolts in it to hold it to a piece of heavy angle iron just actually is quarter-inch 2x4MoreAnd put four bolts in it to hold it to a piece of heavy angle iron just actually is quarter-inch 2x4 bent angle out of stainless steel.
What flex do I need for my driver?
If you're between 97 and 104 mph with the driver, you need a stiff flex. Regular – Now we are getting into the range where a majority of recreational golfers fall, and also where many LPGA pros fall. If you're between 84 and 96 mph, regular is going to be best for you.
What flex do I need for my irons?
Determine the Proper Shaft Flex for Your SwingIf You Can Hit 150 Yards with a...Then Your Optimal Shaft Flex Is...6- or 7-IronRegular Flex (R)5-Iron/Hybrid or 4-Iron/Hybrid(Male or Female)Senior Flex (A/M)Any Iron/Hybrid lower than 4 or any Fairway Wood (Females or Juniors)Ladies Flex (L)1 more row•Apr 6, 2022
What happens if shaft is too flexible?
Having a shaft that is too flexible can also cause the ball to hook uncontrollably, because the shaft bends incorrectly, it will come through with a closed clubface causing the ball to go left, this is because the shaft can't handle your swing speed, and the head is rotating too much.
What is the biggest misconception about golf shafts?
One of the biggest misconceptions about shafts is that there are standards out there that manufacturers adhere to. Most golfers assume that a shaft marked regular or stiff will be the same across the board, no matter who they buy it from.
What is the most important thing about a driver shaft?
One of the most important things about shafts is how they handle the force that a player’s swing will apply. Generally speaking, there are two extremes. Some players apply a late load to their swing, which would require a stiffer tip of the driver shaft. Conversely, a player that extends early in their swing (most recreational golfers) ...
How much weight should a golf shaft be?
Weight. Getting the correct weight of your shaft is an important factor to consider as well. Shafts can range anywhere from 40 to 135 grams. Typically the rule of thumb is that a golfer with a slower swing speed will benefit from using a lighter shaft, and you would add weight as swing speed increases. As you might expect at this point, there are ...
What is the difference between stock shafts and aftermarket shafts?
The difference between stock shafts and aftermarket shafts is usually found in quality control. Many times the bigger OEMs will strip off the paint of last year’s model and give them a new exterior. The graphics look attractive, but you really have no idea what is beneath it.
Why didn't Nick Price find a stiff shaft?
Regardless of the similarity in their swing speeds, Nick Price couldn’t find a shaft stiff enough for his swing because he would apply such an enormous amount of force, whereas Couples didn’t need as stiff of a shaft because of his smooth tempo.
Why is shaft profile important?
Getting the right shaft profile for your swing is very important. It will greatly affect your ability to hit quality shots on the course . There is a lot of confusion in the golf shaft industry. With no standards for performance, the quality greatly varies, and often you get what you pay for. We hope that we have cleared up some ...
Is the shaft of a truck the same as the transmission?
It absolutely has an effect on how well you can play. The shaft is similar to the transmission of a car. While it’s not the engine, it’s still extremely important. If you are driving a truck you want a transmission that can handle its particular demands.
What is the shaft of a golf club?
Many consider the golf shaft the "engine of the club". Golf shafts are either made from graphite or steel. Both types have its benefits and disadvantages. Either way, the golf shaft is where power is stored and released at impact. Sitting in between the golf grip and club head, a solid connection is what allows the golf shaft to do its job.
What is shaft flex?
Shaft flex is a description of how much a shaft will bend under the force of a golf swing with a head attached at the tip end. The speed and frequency of your swing will determine what flex you need. There are generally 5 different flex notations (from most bendable to least bendable): A-flex (Senior), L-flex (Ladies), R-flex (Regular), ...
How long is a 0.370" iron shaft?
decreasing in length from #3-PW). 0.370" parallel iron shafts arrive in uncut lengths, usually 41" or 42" for irons or 46" or more for woods.
What happens if you swing too heavy?
If the overall club is too heavy, you can lose swing speed which can result in a loss of yardage. Too light of a club will be hard to guide and control which can lead to mishits. Players with faster swing speeds or more accelerated tempos can benefit from heavier shafts.
Why do golf shafts bend?
Shaft makers vary the amount of stiffness because golfers have different types of swings—different swing speeds, different tempos—and different amounts of stiffness in a shaft better match up to those different swings.
What happens if you mismatch your golf shaft?
If your swing is mismatched to your golf shaft flex—if you are using an X flex shaft, for example, when you should be using an R flex shaft—you will have a harder time squaring the clubface at impact. The way your shots are flying can clue you into the possibility you might be using the wrong flex.
How to choose shaft flex?
These are just general guidelines, however; the best way to choose shaft flex is to go through a club fitting. Not every golfer can (or is willing) to do that, though.
When were steel shafts invented?
Alas, no. Golf industry veteran Tom Wishon, of Tom Wishon Golf Technologies, explains: "Shortly after steel shafts were introduced in the 1920s, steel shaft makers discovered they could change the diameter and wall thickness of the tubes to create shafts with different amounts of stiffness to better match to the different swing speeds ...
What does it mean when a golfer's swing is slower?
The slower a golfer's swing, generally speaking, the more flex he or she requires in the shafts that are in their golf clubs. And the faster the swing, the more stiffness. Tempo also matters: A jerkier swing requires more stiffness, a smoother swing less stiffness, generally speaking.
What is the kick point of a golf shaft?
KICK POINT: Modern shafts, particularly graphite shafts, can produce kick in different sections of the shaft — high kick, mid kick and low kick being three obvious points of reference. Fitters often spend considerable time matching a golfer’s swing with a particular kick.
What is a raw shaft?
RAW: A raw shaft is an uncut shaft that has not been installed in a clubhead. BLANK: This is another word for a raw shaft. When clubmakers refer to a blank, they mean a raw shaft. SPINE ALIGNMENT: Golf shafts, because they are round and hollow, have a spine that is a result of the manufacturing process.
What does low torque mean on a golf swing?
Normal measurements are in the 2- to 6-degree range. A low torque number means less twisting of the shaft but also can mean a harsher feel . A high torque number is associated with a soft-feeling shaft, although there may be a sacrifice in accuracy. FLEX: The strength of a shaft as it bends during the swing.
What is torque in swing?
TORQUE: A measurement of the circular rotation of the shaft during the swing.
What is the tip of a golf club called?
TIPPING: The tip end of the shaft, which is inserted into the clubhead, sometimes is cut or trimmed to provide more stiffness in the shaft. This is called tipping. While the practice is common on professional tours, it is not widely used among amateur golfers.
Where is the ferrule on a golf club?
FERRULE: The ferrule is an oval piece, commonly made of plastic, that is located just above the neck of the clubhead. Modern ferrules not only are decorative, they are made with great precision to provide accurate and secure bonding between the shaft and clubhead. BUTT: The top end of the shaft, called the butt, is located underneath the grip.
How much does a true temper iron shaft weigh?
True Temper’s Dynamic Gold, the most popular steel iron shaft on the PGA Tour, weighs abourt 130 grams. At the other end of the spectrum, Mitsubishi Rayon has a Bassara graphite driver shaft that weighs about 35 grams. RAW: A raw shaft is an uncut shaft that has not been installed in a clubhead.
What to know about golf shafts?
In today’s guide we will review everything you need to know about golf shafts. Picking out the proper golf shaft is very important as it will impact several components of your golf swing. For example, picking the wrong golf shaft flex can cause you to hook or slice the golf ball. It also can hinder the total distance the ball flies by having too much spin or too low of launch. But don’t worry, at the end of reading today’s guide you’ll be much more educated on the buying process and how to pick out the right golf shaft. Lets Get Started!
Why do golf clubs have shafts?
During the golf swing the shaft causes deflection (bend) that causes the clubhead to be in a forward and toe downward position relative to the grip of the club.
How to determine golf shaft flex?
Start by using a launch monitor to analyze your golf swing speed. If your swing ranges between 85 mph and 95 mph then you should start with a regular flex. If your swing speed is faster than 95 mph, then you should try a stiff shaft.
What is the best shaft for golf?
Steel – A steel golf shaft is usually stronger and more durable (less likely to snap) than a graphite shaft. It’s also less expensive and sometimes stainless steel is used in the creation of the steel shaft. There is also two variations, stepped steel and rifle steel.
Why does my golf shaft have a slice?
When the golf shaft is too stiff, it doesn’t unload properly at impact. This can lead to the face staying open and result in a slice golf shot. Beware, a slice isn’t always an indication the shaft is too stiff so if you already have a slice, it could be caused by another fault in your golf swing.
What shafts do golfers use?
For most golfers, a graphite shaft works great. Most iron sets are made with graphite shafts as well so you get that material type by default usually unless you specifically seek out steel shafted irons. With steel shafts, you may find that golf shots are easier to control.
What is the most common shaft material used in golf clubs?
Graphite Shafts. Graphite – this type of shaft is usually lighter weight compared to a steel shaft but it’s less durable and more expensive to make. Graphite is one of the most common shaft types used in golf clubs and can arguably be considered the main shaft material used, beating out steel.
What is the difference between a low trajectory shaft and a mid high shaft?
In a typical driver fitting, for example, a Low trajectory shaft may produce a 9 degree launch while a Mid-High trajectory shaft may only increase the launch to 11 degrees , and spin may only increase from 2,500 to 2,900.
How many categories of shafts are there?
Shafts are typically identified by launch or trajectory characteristics in five categories: Low, Low-Mid, Mid, Mid-High and High. The same categories apply to the spin characteristics.
What is a BGF shaft?
The BGF Fitting System has a one-to-one relationship between Trajectory and Spin. This means that a shaft that has a Low Trajectory designation will also have a Low Spin designation. And a shaft that is Mid-High Trajectory will also have Mid-High Spin. So when selecting shafts in a fitting, our fitters choose a shaft category based upon the BGF Fitting Recommendations in the appropriate category.
How many categories of shafts are there?
Shafts are typically identified by launch or trajectory characteristics in five categories: Low, Low-Mid, Mid, Mid-High and High. The same categories apply to the spin characteristics.
How many degrees does a low trajectory shaft launch?
In a typical driver fitting, for example, a Low trajectory shaft may produce a 9 degree launch while a Mid-High trajectory shaft may only increase the launch to 11 degrees, and spin may only increase from 2,500 to 2,900.
