
– A golf club can be bent two degrees flat when the lie angle is lowered and the heel of the club is raised to a position that is higher than the toe of the club. Golfers change the lie angle of a club to better their chances of hitting the center of the clubface.
What does 2 degrees flat mean on a golf club?
What does 2 degrees flat mean? – A golf club can be bent two degrees flat when the lie angle is lowered and the heel of the club is raised to a position that is higher than the toe of the club.
What is a flat lie angle in golf?
A flat lie angle is simply when the heel of the golf club is bent so it is higher than the toe. Club fitters are able to bend clubs to increase or decrease the lie angle using a loft, lie bending machine. (more on this down below) Upright lie- The toe of the club is bent higher than the heel of the club (lie angle is higher than a standard lie)
What is a good lie angle on an Irons?
Lie angles almost always range from the mid-50 degrees (in drivers) to the mid-60 degrees (in short irons). In irons, the range is typically from 59 or 60 degrees to around 64 degrees. (Lie angles on putters reach into the 70s.)
What is the effect of 2 degree flat lie angle?
Effect of 2 degree flat lie angle? - WRX Club Techs - GolfWRX Effect of 2 degree flat lie angle? Absolutely could be. More sharing options... A club that is too flat will likely lead to shots going right.

What does +2 lie angle mean?
Most likely, it means that a club is 2 degrees more upright than the standard lie angle for that brand and model. For example, if a 5 iron has a standard lie angle of 62 degrees, but you either custom order it or have it adjusted to be a lie angle of 64 degrees, then it would be considered to be 2 degrees upright.
What does 1 degree flat iron mean?
Lie Angle Defined If the lie angles of your clubs are 1 degree greater than the manufacturer's standard, your clubs are 1 degree flat. If your lie angles are lower by 1 degree, the clubs are 1 degree upright.
What lie angle should my irons be?
Lie angles almost always range from the mid-50 degrees (in drivers) to the mid-60 degrees (in short irons). In irons, the range is typically from 59 or 60 degrees to around 64 degrees. (Lie angles on putters reach into the 70s.)
What does flat mean in golf clubs?
If your lie angle is too flat, typically meaning it's closer to 0 degrees than 90 degrees, then that means you will typically hit the ground with your club with the toe side of the sole.
Does 2 degrees flat mean?
A golf club can be bent two degrees flat when the lie angle is lowered and the heel of the club is raised to a position that is higher than the toe of the club. Golfers change the lie angle of a club to better their chances of hitting the center of the clubface.
What does 2 up mean in golf clubs?
Re: What does 2UP mean on an iron? Yeah. It means the club is 1/2 inch longer than standard length and that the lie angle is 2 degrees upright, meaning the toe points up higher at address. A flatter lie angle means the toe points down.
Does flattening lie affect loft?
The first thing to know is that lie angle being incorrect is the most important on clubs with more loft. The more loft a club has, the more magnified an incorrect lie angle will be when it comes to the direction of your golf ball. A 3 iron will be much less offline than a PW with the same lie angle.
Does 1 degree upright make a difference?
Yes it will make a difference, I play 2 degree upright and +1/2. If your hitting the ball left all the while (I am guessing your right handed) won't be to do with having the lye angle to flat.
How do you know when you need irons upright?
All you need is a marker. Draw a straight line on the back of the golf ball, and have it facing the clubhead. After you make impact the line will appear on the face. If it's pointing towards the toe, then your club is too upright.
How do I determine my lie angle?
4:4511:13HOW TO CHECK LIE ANGLES ANYWHERE - YouTubeYouTubeStart of suggested clipEnd of suggested clipPointing it towards the face of the club. Away from the target. And hitting balls that way.MorePointing it towards the face of the club. Away from the target. And hitting balls that way.
How much does 1 degree of loft affect distance?
The distance difference between clubs is created equally by the increments in club length and loft angle. The calculations here are based on 1/2″ club length difference = 5 yards distance difference and every 4° loft angle difference = 5 yards distance difference.
Do shorter golfers need flatter clubs?
Generally, shorter golfers will need a flatter lie angle, whereas taller players will need a more upright lie angle. If you hit a lot of shots toward the toe of your club and your ball tends to fade to the right, you probably have a lie angle that is too flat for you.
What direction does offset go on X-14?
Offset generally will go LEFT of no offset. So if you hit X-14s with offset and you generally move the ball left with a left miss, then you hit no-offset and 2 flat, both of those would influence the ball to the right of your X-14 stds...
Does a shot with a too flat lie angle go right?
Actually, even well struck shots with a too-flat lie angle will go right. It has nothing to do with striking the ball poorly or not. It has everything to do with the angle of the face at contact that is automatically facing right because of the faulty lie angle. quote]
Is 2 degrees flat or offset?
Two degrees should not make a "significant" difference, assuming "std" ballflight is good... A combination of two degrees flat and less offset, might encourage slightly lower ball flight to the right, but it shouldn't be a dramatic difference...
Do irons go to the right?
If your original irons' lies actually don't fit (for example, if they were too upright), and if you hit them straight by compensating for the lie, then without changing your swing a 2-flat iron would probably go to the right.
What happens if the lie angle of your golf clubs is ill-suited to you?
When the lie angle of your clubs is wrong for your swing or body type, you can put a great swing on the ball and still have problems with accuracy. Poorly fitting lie angles create pushes and pulls and other mishits.
What is the lie angle of a golf club?
The "lie angle" of any golf club is the angle formed between the center of the shaft and the sole, or ground line, of the club when the club is soled in its proper ...
What does it mean when your divots are deeper on the toe side than the heel side?
If your divots are deeper on the toe side than the heel side (toe down, heel up at impact) or deeper on the heel side than the toe side (toe up, heel down at impact), that's a sign your lie angles might be too flat or too upright.
What is the lie angle on a 9 iron?
Upright lie angle: A lie angle that is higher than the standard lie angle (a 66-degree lie angle on a 9-iron is more upright than the standard 9-iron lie angle of around 64 degrees). You might hear a golfer (or clubfitter) saying things such as, "You need flatter lie angles on your irons," or "I had my irons bent 1-degree upright.".
Why is a proper lie angle important?
Proper Lie Angle Is More Important in Irons Than in Woods. Don't misunderstand: Lie angle is an important factor in all golf clubs, even the putter. But having improperly fit lie angles causes more problems in irons than in the woods.
What is lie angle?
Lie angle is a factor that affects the accuracy of golf shots. Golfers who use clubs whose lie angles don't fit their body types and/or golf swings are costing themselves strokes. Matching the lie angle of clubs to the specific golfer is one of the goals of a clubfitting session.
What is the range of lie angles?
Lie angles almost always range from the mid-50 degrees (in drivers) to the mid-60 degrees (in short irons). In irons, the range is typically from 59 or 60 degrees to around 64 degrees. (Lie angles on putters reach into the 70s.)
What is the lie angle on irons?
Lie angle is one of the most important, if not THE most important thing to get right when you buy a set of irons. Each manufacturer has a different spec for the lie angle on their clubs, and a majority of golfers never get them adjusted for their particular swing.
What is the lie angle of a golf club?
Lie angle is defined as the angle between the shaft and the ground line when the club is measured in normal playing position with the center of the sole touching the ground line. The most important thing about measuring lie angle for each particular golfer is how the club is interacting with the ground at impact.
What happens when the angle of the club is not adjusted properly?
There are only two scenarios that occur when your lie angle is not adjusted properly for your swing. The club is too upright, and the toe is not making contact with the ground at impact. The club is too flat, and the heel is not making contact with the ground at impact.
Why is the lie angle important?
Wrapping it up. To briefly summarize, the lie angle of your irons is extremely important because it will greatly affect the initial direction of your shots. Not all irons are created equal, and most players are using irons that likely do not have the right specifications for their swing.
How far off the target line does the ball travel?
For every degree that your lie angle is either too upright or flat, the ball will initially travel 4 yards off your intended target line. Some players have lie angles that are as much as 2-3 degrees off, which means they are making things very difficult for themselves on approach shots!
Do golfers get adjustments when buying irons?
When golfers buy a new set of irons they don’ t usually get any kind of adjustments made , most notably their lie angle. They incorrectly assume what they are buying is right for them. Today I want to talk about one of the most important things players are overlooking when they purchase an iron set. If this specification is not adjusted properly ...
Is there a standard for lie angle on 7 irons?
There is no standard. Showing up to the store and buying irons off the shelf without testing out the lie angle is a coin flip, because there is no standard for lie angle in the golf industry. I went to the websites of some of the most popular manufactures and got the standard lie angles for 7-irons; here are the results:
What is 1 degree flat?
The term “1 degree flat” is probably unfamiliar to anyone who hasn’t bought a set of golf clubs from a professional club fitter. If you buy clubs off the rack at a golf store, you probably focus more on the shaft’s length, flex and composition. If you examine the clubheads, you’ll likely consider whether they’re forgiving of mishit shots.
What happens if you hit a golf ball on flat ground?
In other words, the effective lie angle will be too upright. Likewise, if you hit a ball on flat ground with a club that’s too upright the heel will strike the ground first, causing you to pull the shot. Flattening the lie angle cures that equipment defect.
What happens if you hit the board with the clubhead's heel?
But if you’re consistently hitting the board with the clubhead’s heel, then your lie angle is too upright and must be made flatter. You can do a rough check yourself with your current clubs by examining any divots you take during a round. If the divots are deeper on the heel side your lie angle is too upright.
How does the lie angle affect golf?
To understand how the lie angle impacts your game, think about hitting a ball on a hilly course. If your ball is on a hill or short rise and lies above your feet, it will fly to the left -- if you’re right-handed -- when you take a normal swing, because the clubhead’s toe will be higher than the heel. In other words, the effective lie angle will be too upright. Likewise, if you hit a ball on flat ground with a club that’s too upright the heel will strike the ground first, causing you to pull the shot. Flattening the lie angle cures that equipment defect.
What is the lie angle of a 9 iron?
For example, a typical driver has a lie angle of about 55 degrees, while a 9-iron’s lie angle is about 64 degrees -- the more loft a club contains, the greater the lie angle. If the lie angles of your clubs are 1 degree greater ...
Do clubheads forgiving of mishit shots?
If you examine the clubheads, you’ll likely consider whether they’re forgiving of mishit shots. But if you’re fit for clubs, the club fitter will make sure that the clubs have the correct lie angle to suit your body and your swing.
How many degrees are in a 5 iron?
There is no industry standard for golf club lofts: A 5-iron from Company X might have a loft of 28 degrees, while Company Y's 5-iron is 27 degrees and Company Z's 5-iron is 29 degrees. So you can shop around and compare sets. Another way to get weaker lofts is to visit a clubfitter, clubmaker, club repairer — any shop that has what is called ...
Which clubs have the lowest loft?
The longest-hitting clubs (driver, woods, low hybrids, long irons) have the lowest lofts; the shortest-hitting clubs (short irons, wedges) have the highest lofts. So as a golfer moves through the bag, the lofts increase as the clubs get shorter.
What does it mean when you hear weaker lofts?
The short answer: When you hear reference to weaker lofts or weakening lofts, it means increasing the loft angle of your club or clubs, usually to improve your ball flight. If you are hitting your shots on too flat a trajectory and you want to achieve a higher trajectory, then weakening loft is a way to do that.
What does "weakening lofts" mean?
But back to the original question, to sum up: Weakening lofts or going to weeaker lofts refers to increasing loft angle — going from, say, 27 degrees in your 5-iron to 29 degrees in your 5-iron. Weaker lofts mean (all other things being equal) ...
What does a clubfitter do?
One of the things a clubfitter will do is ensure that the loft angles of your clubs are best-suited to your swing speed and swing path. And that's why a golfer might weaken his or her lofts, that's why a friend or a pro might advise getting weaker lofts. You can weaken your lofts one of several ways, including buying a new set of golf clubs.
