What is the difference between an MB and a CB club?
Needless to say the ball will fly every direction. The second case is the CB. If you hit the sweet spot, the feel will be slightly less pleasure than the MB. Instead of the concentrated sweet spot in the center, with the help of the CB's "RIM" around the club, the vibration and shock will spread.
Why are golf clubs called Irons?
The golf clubs called irons are so-called because their clubheads are made of metal. Of course, "woods" are now also made of metal, but that's a relatively recent development. Irons have featured metal clubheads (steel, these days) for centuries.
What are the long irons in golf?
Long irons are the 2-, 3- ,and 4-irons; mid-irons, the 5-, 6-, and 7-irons; short irons, the 8- and 9-irons and pitching wedge. (Two-irons are becoming obsolete and are exceedingly rare for recreational golfers. Because of this, some sources now count the 5-iron as one of the long irons. We still classify it as a mid-iron, however, as do most.)
Why do golf clubs hit iron shots on the downswing?
That is because iron shots are played with the ball positioned so that it is struck on the downswing. That is, the club is still descending when it makes contact with the ball. Knowing which iron to use in which situation is mostly a function of learning how far you hit each club.
What does CB and MB mean in golf clubs?
If you hit the sweet spot, MB will give you 100% satisfactions. CB will give you 90% satisfactions. If you MISS! MB will give you with 50%~ 60% feedbacks. CB will give you 70%~ 80% satisfactions.
What does CB iron mean?
"Cavity back" — as in "cavity back iron" — is a golf term that refers to a design feature in irons that produces increased perimeter weighting, thereby making irons that have cavity backs more forgiving on mishit shots.
What does CB mean on Titleist irons?
Cavity backThe MB stands for 'Muscle Back' and CB stands for 'Cavity back'. And, although these are a continuation of a long line of players irons from Titleist, I still think it's important to detail the changes and performance of these modern classics.
What is CB in golf?
Countback is the fairest way to decide an outcome. In multi-round events, the last 18 holes are first used for countback. If this cannot separate a tie, then the countback method for 18-hole events is then applied, as described above.
What is the difference between CB and MB irons?
The main difference is that cavity back irons are bulkier than blades and have a hollow section at the bottom of the club. Cavity backs have a much bigger sweet spot, are a lot more forgiving, and will generate more distance. The reason most weekend golfers use cavity backs is because of the increased forgiveness.
What is the difference between Titleist CB and MB?
The 718 MB has a smooth and responsive feel when struck in the middle of the face with a nice soft click. With the 718 CB, the feel is a little more forgiving with a larger sweet spot and the sound is a bit more muted of a click than the MB.
What handicap should play Titleist CB?
The Titleist 716 CB iron has come in for the same tungsten treatment as the 716 AP1 and AP2 irons, which is unusual in what is essentially a hybrid blade iron....Titleist 716 CB Irons - Product Details.UK Launch23 October 2015USA Launch23 October 2015Handicap RangeLow HighGolferMensHand AvailabilityLeft, Right11 more rows•Sep 22, 2015
Are Titleist CB irons blades?
With their newest iron offerings, Titleist has something special for the golfing purist: the 620 MB and 620 CB irons. The 620 series are true, one-piece forged irons that are made for precision and shot-making on the course.
Are Titleist CB forgiving?
The Titleist 620 CB irons offer slightly more forgiveness than the 620 MB without giving up much in terms of looks. Excellent feel and feedback. For highly skilled ball strikers only.
Are blades better than cavity back irons?
Although blades are less forgiving than cavity backs, they tend to have less offset, better turf interaction, and improved workability, when compared to cavity back irons. They also force consistency from the best players in their swing which is why they are still favored by tour pros.
Do any pros use cavity back irons?
According to Titleist, 70% of tour players use cavity backs while 30% use blades. Cavity back irons provide increased forgiveness while blades offer more control and a better feel. This is why a lot of tour players have both cavity backs and blade irons in their bags.
Are cavity back irons more forgiving?
Made of cast iron, cavity backs are more affordable than forged blades. In the case of cavity-back irons, additional materials become a part of the design just to boost clubhead speed and ball speed and, ultimately, distance. So, naturally, they're also a lot more forgiving.
What is the progressive design of MB irons?
The progressive design of the MB irons flows seamlessly in the CBs. Each CB iron has a beautiful, traditional profile . There’s very little offset, the top lines are thin, and the shorter heel gives them a compact look.
What does the MB look like?
At address, the MB provides a couple small surprises. First, it has a very full, rounded face in the pitching wedges which makes the club look a bit larger. The progressive design shifts to a more traditional, but still full, shape in the 7I. Also, the shaping around the heel gives it the look of having more offset than it actually does . Unsurprisingly, the top line and sole are quite thin.
What are the two sets of irons that Kyle Carpenter makes?
He wanted to play clubs that he loved as much as he loves the game. The result, after less than two years in existence, are two sets of irons: MB, muscle backs, and CB, cavity backs . For this review, I tested the combo set, to see if a small company in Iowa can make clubs that compete with the biggest names.
Why are blades called players clubs?
Blades gained the nickname “player’s clubs,” because the best players preferred the extra control and feedback. In addition, blades often had more graceful lines than the sometimes chunky cavity backs.
How did Ping irons work?
When Ping successfully produced irons using a casting process —where molten metal could be formed in a mold—it found an economical and new method of shaping irons.
Why do golf clubs have cavity backs?
In addition, by moving more weight to the sole of the club, cavity backs made it easier to get the ball off the ground.
What are blade irons made of?
Once upon a time, there were simply… irons. We now refer to these vestiges of history as “blade” irons—forged from thin blocks of carbon steel that were shaped by hand and/or machine, then plated with chrome.
What is the purpose of the cavitation back iron?
Cavity-back design allowed manufacturers to create an iron that did not require a perfect strike to make an acceptable shot.
Why are golf clubs called irons?
The golf clubs called irons are so-called because their clubheads are made of metal. Of course, "woods" are now also made of metal, but that's a relatively recent development. Irons have featured metal clubheads (steel, these days) for centuries. The clubheads of irons are thin from front to back, and the clubfaces are grooved to impart spin on ...
Why are irons called irons?
The golf clubs called irons are so-called because their clubheads are made of metal.
What is the difference between a blade and a muscleback iron?
The difference is that a blade-style features a full back on the rear ...
Why are short irons easier to hit than long irons?
Without getting too technical, the reason is that as loft increases and shaft length decreases, a club becomes easier to master. A shorter shaft makes a club easier to control in the swing (think of baseball where a batter will "choke up" on the bat—essentially, shorten the bat—when he's simply trying to make contact rather than swing for the fences). More loft helps get the ball airborne and adds a little more control to the shot.
How many clubs are in a golf club?
A typical, off-the-shelf set of irons will include a 3-iron through pitching wedge (advertised as "3-PW"), 8 clubs total. The clubs are identified by a number (3, 4, 5, etc.) on the sole of each club, except for the pitching wedge which will have a "PW" or "P." Other irons may be available for purchase separately, including a 2-iron and additional wedges ( gap wedge, sand wedge, lob wedge). None of the additional clubs are necessary for beginners, and especially not the 2-iron. 1-irons used to be available, too, but are now virtually extinct.
How many yards is a 3-iron?
The yardage gap between irons is generally 10-15 yards. Your 3-iron, in other words, should produce shots that are 10-15 yards longer than your 4-iron. The specifics of this gap depend on the player, but the gap should be consistent from club to club.
What are the different types of irons?
Irons are generally categorized as long irons, mid-irons , and short irons. Long irons are the 2-, 3- ,and 4-irons; mid-irons, the 5-, 6-, and 7-irons; short irons, the 8- and 9-irons and pitching wedge. (Two-irons are becoming obsolete and are exceedingly rare for recreational golfers. Because of this, some sources now count the 5-iron as one ...
Why do golf clubs have shafts?
During the golf swing the shaft causes deflection (bend) that causes the clubhead to be in a forward and toe downward position relative to the grip of the club.
What is the most common shaft material used in golf clubs?
Graphite Shafts. Graphite – this type of shaft is usually lighter weight compared to a steel shaft but it’s less durable and more expensive to make. Graphite is one of the most common shaft types used in golf clubs and can arguably be considered the main shaft material used, beating out steel.
What is the best shaft for golf?
Steel – A steel golf shaft is usually stronger and more durable (less likely to snap) than a graphite shaft. It’s also less expensive and sometimes stainless steel is used in the creation of the steel shaft. There is also two variations, stepped steel and rifle steel.
Why does my golf shaft have a slice?
When the golf shaft is too stiff, it doesn’t unload properly at impact. This can lead to the face staying open and result in a slice golf shot. Beware, a slice isn’t always an indication the shaft is too stiff so if you already have a slice, it could be caused by another fault in your golf swing.
What shafts do golfers use?
For most golfers, a graphite shaft works great. Most iron sets are made with graphite shafts as well so you get that material type by default usually unless you specifically seek out steel shafted irons. With steel shafts, you may find that golf shots are easier to control.
What to know about golf shafts?
In today’s guide we will review everything you need to know about golf shafts. Picking out the proper golf shaft is very important as it will impact several components of your golf swing. For example, picking the wrong golf shaft flex can cause you to hook or slice the golf ball. It also can hinder the total distance the ball flies by having too much spin or too low of launch. But don’t worry, at the end of reading today’s guide you’ll be much more educated on the buying process and how to pick out the right golf shaft. Lets Get Started!
How much does a graphite shaft weigh?
Graphite shafts are also much lighter weight (50-85 grams) while steel shafts can start at 120 grams in most cases.
50 Words Or Less
Introduction
- Like so many entrepreneurs, Kyle Carpenter launched Ballistic Golf to scratch his own itch. He wanted to play clubs that he loved as much as he loves the game. The result, after less than two years in existence, are two sets of irons: MB, muscle backs, and CB, cavity backs. For this review, I tested the combo set, to see if a small company in Iowa can make clubs that compete with the b…
Looks
- In the bag, Ballisitic Golf’s irons are very traditional and very desirable. The MB has a soft, rounded shape with only the Ballistic logo on the toe. The CB has a slightly more angular shape, but the cavity design is classic, and, again, it’s only adorned with one small logo. Everyone I showed these irons to noted the clean, minimalist appearance....
Sound & Feel
- My first experience with the Ballistic MB irons was hitting a PW to warm up during the first outdoor session of the year. My expectations for my swing weren’t high, but on impact I was met with the most beautiful soft, solid feel. I immediately raked another ball. Same exhilarating feel. These MB irons are truly addictive to hit. The feel is so satisfying on center, all I want to do is hit …
Performance
- Reading through Ballistic Golf’s description of their irons is a refreshing change of pace from all the distance-centered hype of many OEMs. You quickly get the picture that both the CB and MB irons are very traditional, designed for the skilled, discerning player. The focus is on things like versatility, visual appeal, and turf interaction rather than how far the 6I goes. All this, combined …
Conclusion
- For the golfer who wants to get back to traditional-looking irons with traditional lofts, there aren’t many better options than the MB and CB irons from Ballistic Golf. With the option to buy heads only or custom built sets, Ballistic Golf provides not only a brand you won’t find everywhere but personalized options, too.