What is a golf club?
The Golf club is a club in golf which is used to hit the ball. There are 6 types of golf clubs. Let’s have a quick look: Fairway woods (Drivers and fairway woods both are known as woods by the way) Components of a golf club: It has 4 components basically:
What do the numbers on golf clubs mean?
You will see numbers associated with each golf club. These numbers represent the loft angle in clubs. Here is a list of club numbers you will be seeing your entire life: The pitching wedge and putter comes without any numbers. Let’s get to know more……. 1. Drivers For beginners, know your driver first.
How are golf clubs measured?
The first one is your height. Manufacturers usually make clubs to account for golfers anywhere between 4’8” to 6’7” inches tall. The second measurement is wrist-to-floor distance. This is done by standing on a flat surface with your arms relaxed and pointing down.
Are all golf clubs the same size?
For instance, not all clubs have the same standard sizing. Woods are different than irons and putters in terms of standard sizing. Grip Size. Here’s another factor that affects the appropriate golf club size. The angle and the grip size of the club are as important as the height and wrist-to-floor measurements.
What does 460cc mean on a golf driver?
“cc” stands for cubic centimeters and the USGA dictates the maximum volume a golf driver can be is 460cc. According to the USGA Rules for 2019, “The volume of the clubhead must not exceed 460 cubic centimetres (28.06 cubic inches), plus a tolerance of 10 cubic centimetres (0.61 cubic inches)” (Page 49).
What does 400cc mean in golf?
Small head drivers are golf clubs with a smaller surface area compared to most other drivers. The surface area of a driver is generally measured in cubic centimeters or commonly referred to as cc. Small heads are available in 380cc to 400cc. On average, the largest drivers have a surface area of about 460cc.
Do I need a 460cc driver?
Higher handicappers are best off using a 460 cc driver due to the enhanced sweet spot and amplified forgiveness. 400cc used to be the standard until the limit was increased making larger drivers a lot more common place.
How many cc's is a driver?
The USGA dictates that a golf driver can be no larger than 460cc (cubic centimeters)
What size driver do pros use?
between 44.5 and 45.5 inchesIt was typical in the 1990s for drivers played on tour to be in the 43-inch range, and now the majority of tour players use a driver between 44.5 and 45.5 inches.
Are bigger drivers easier to hit?
Benefits Of Large Driver Heads The larger head drivers can also help to give certain players a bit more confidence in their golf game. They will look at the shot that they are supposed to hit and realize they have a much better chance of hitting it exactly as they should because of the larger head driver in their hand.
What size of golf driver do I need?
LENGTH. The driver is the longest club in your bag. Men's drivers tend to measure between 45 and 48 inches, while women's drivers are typically between 43 or 44 inches. The size used depends on how a golfer feels in terms of overall control.
Are oversized clubs legal?
Are Oversized Irons Legal? According to the USGA, rule 4b(ii), an oversized iron is considered illegal (non-conforming) if the distance from the heel to the toe is less than the distance from the face to the back. In other words, the oversized iron must be longer than it is wide.
What is the largest cc golf driver?
460ccClub heads are measured, by volume, in cubic centimetres (cc) with a maximum limit of 460cc. Almost all drivers in today's market are between 440 and 460c.
How do I choose a golf driver?
When you are in the market for a new driver, there are seven major aspects to consider: skill level, size and shape of the club head and clubface, color, loft, shaft flexibility, and adjustability.
What golf driver is best for me?
Driver loft, which typically ranges from 8.5° to 15°, should match your swing speed. The slower your swing speed the more loft you should have. If your average swing speed is between 80 and 90 mph (the average for most male golfers) you should be using a driver with about 10.5° to 12° of loft.
What loft should my driver be?
The ideal driver loft depends on your swing speed and the attack angle. Average players that swing the club less than 95 MPH will likely find that a 10.5-degree driver performs the best. Better players who can control their drives and want the most distance will lean more towards a 9-degree driver.
How many cubic inches are in a golf clubhead?
According to the USGA Rules for 2019, “The volume of the clubhead must not exceed 460 cubic centimetres (28.06 cubic inches), plus a tolerance of 10 cubic centimetres (0.61 cubic inches)” (Page 49). Ok cool, now what does that mean and why should the average golfer care?
What is the unit of measurement of volume?
In our day to day lives, one of the few things measured in volume is liquids. For example, soda is commonly sold in 2-Liter bottles. The “Liter” is a unit of measurement of volume and is defined as 1,000 cubic centimeters (cc).
What does the larger the club head mean?
The larger the club head, the more energy is going into the ball, and the further the ball is traveling. The USGA is simply trying to limit how far drivers can hit the ball. They don’t want people out on the course swinging bowling ball size drivers. Authored by Taylor Morton.
What is 460cc golf head?
The USGS is the central authority which fixes the standards that are used for the golf head drivers. 460cc is the maximum permissible size of a golf head.
What is a 400cc driver?
A 400cc driver falls in the “small head category”. They can provide a great deal of flexibility to the player. These heads generally have lesser drag compared to the big head drivers. The head speed is also is higher when using 400cc drivers Vs 460cc models.
Why do golf clubs have head drivers?
Golf head drivers are used to provide maximum distance coverage when compared to regular clubs. This is because drivers generally have longer s hafts than normal. The loft angle of the driver is designed to provide a long range of shot.
What is a small head golf club?
Small head drivers are golf clubs with a smaller surface area compared to most other drivers. The surface area of a driver is generally measured in cubic centimeters or commonly referred to as cc. Small heads are available in 380cc to 400cc. On average, the largest drivers have a surface area of about 460cc.
What are the different types of golf irons?
Golf irons can be classified into 3 categories namely, short irons, mid irons, and long irons. 8-irons or 9-irons are classified as short irons. These are characterized by shorter shafts and bigger loft. The shaft sizes increase as we move from short irons to long irons.
Why is it important to control a golf driver?
Gaining optimum control of a driver is essential to make full use of its potential. In order to achieve greater control, golfers can use a small gold head on their drive. If the player is unable to control the driver correctly, then there is a high chance of the ball moving out of control.
Why is there an upper limit on driver size?
This is because drivers having more surface area will have more energy being transferred to the ball. Not having an upper limit on driver size would lead to the ball traveling longer distances than necessary. To avoid this, the USGS has come up with ...
How many cubic inches are in a clubhead?
The volume of the clubhead must not exceed 460 cubic centimeters (28.06 cubic inches), plus a tolerance of 10 cubic centimeters (0.61 cubic inches).
When did titanium driver heads become popular?
Driver heads produced from titanium didn’t become popularized until 1995 when the Callaway Great Big Bertha and the TaylorMade Titanium Bubble were introduced.
How is progress measured in golf?
In golf, progress is usually measured by decades, but in the case with driver size and the ability to produce these clubs out of lighter, yet stronger materials, size grew exponentially in only the next few years.
When did the USGA impose a 460cc limit?
So in October 2003, the USGA imposed a 460cc limit on club head size effect January 1, 2004.
When was the first titanium driver made?
A milestone of sorts came in Japan in 1990 as Mizuno created the first titanium driver called the Ti-110. Titanium had been well known for its high strength, yet lighter weight compared to steel. The extremely expensive price tag made this a very limited product to consumers.
Why are wedges different from irons?
Wedges can simply change the outcome of the game because of its specific use and characteristics. These clubs are very identical to irons because of their look and build. Wedges can be distinguished from the irons by their lofts. These clubs have higher loft degrees ranging from 46 to 64 degrees.
Why do you need fairway wood?
Technically, you need the fairway wood for two reasons: When you have to make a shot with your iron club and speculate that it requires bit more distance, here the fairway wood comes into play . So, for ranges beyond the iron club, fairway wood is mostly used. Most players use the driver to make a shot from the tee box.
What is the best golf club in 2018?
Callaway golf clubs are the hot favorite in 2018. It has accumulated a number of awards from the Golf Digest’s Hotlist 2018. It was awarded gold rating for the best drivers, best fairway woods and best irons in 2018. For best Mallet putter and best blade putter, you have to look into some other brand.
Why are hybrid golf clubs used?
Hybrid golf clubs are most commonly known as the club for recreational golfers. It’s because of the ease at which you can make strokes. But, professionals have slowly started to use them due to their added advantages. With a hybrid club, you get a clubhead of a larger surface area.
How far can a 7 iron cover?
For example, if you have an 8 iron and it covers 130 yards for you, then a 7 iron will cover roughly 140-145 yards.
How to choose a golf club?
But as a general rule, the best way to choose a club is to know your hitting range first. So, if you know your shortest and longest range, from there, you can build up your golf club collection. A number factor comes into play choosing a golf club like distance, placement, and conditions of play.
What is hybrid club?
The distinctive feature of the hybrid club is it has both the combination of wood and an iron golf club.
What is a wood golf club?
Wood golf clubs are long-range clubs used at the beginning of every hole when you tee off. For longer courses, use wood golf clubs in the second swing. Woods have large, circular club heads with a flat front where you strike the golf ball.
What does the number mean on a golf club?
Golf club numbers refer to the loft, which is the angle of the golf club face. When you adjust the loft, you are changing the height and distance the golf ball will travel when struck. The lower the golf club number, the less loft, the less intense the angle on the golf club face; this means the golf ball will travel more distance at a lower height.
What are the different types of golf clubs?
The three common types of golf clubs are wood, iron and putter. You can find these types of golf clubs at our golf pro shop in South Florida.
Why are putters so easy to remember?
Putter Golf Clubs. Putters are easy to remember because they have short shafts and smaller club heads. You may recognize this club from the last time you played mini-golf, but, hopefully, your putter is much better than those!
Is it hard to learn to play golf?
Learning to play golf can be difficult due to the golf rules and regulations that come with it. A common question asked by rookies and veteran golfers alike is the meaning behind the various golf club numbers.
What factors affect the size of a golf club?
Here’s another factor that affects the appropriate golf club size. The angle and the grip size of the club are as important as the height and wrist-to-floor measurements . However, this means more to serious professional golfers than to someone just starting out.
Why do manufacturers make golf tables?
Manufacturers create such tables to help everyone from beginner golfers to pro golfers choose the right club size for their play. Here’s how your size affects the dimensions of your needed golf club size and why it matters. Last but not least, the grip size should also be determined for the club to fit perfectly in your hands.
What is the difference between men's and women's golf clubs?
The difference between men’s and women’s clubs is generally noticeable on the grip. Men’s golf clubs have larger grips and are also about 2.5 cm longer than women’s golf clubs. Kids’ clubs are even smaller than women’s for the most part. Knowing what type of golf club you need is the first step in determining the appropriate size.
How tall is a golf club?
Manufacturers usually make clubs to account for golfers anywhere between 4’8” to 6’7” inches tall. The second measurement is wrist-to-floor distance. This is done by standing on a flat surface with your arms relaxed and pointing down. You then measure the distance between the ground and the line where your wrist meets your hand.
What is plus and minus golf clubs?
The adjustments on a size chart are made with reference to the standard clubs. Therefore, the plus and minus values show how much shorter or longer your golf club should be compared to the standard, according to your measurements, ...
What is the second measurement of a grip?
The second measurement is the length of your middle finger from the tip to its base. When you have these two measurements, you can then find the appropriate grip size on a manufacturer’s size chart. Note that we only use the middle finger as an example as it applies to most people.
Can you play golf with an off size club?
Because there are plenty of variations, it’s unsurprising that a lot of people sometimes play with off-size clubs. Most pros recommend that even beginners should opt for a perfectly sized golf club in order to have the best learning experience.