What do shaft flex codes mean on golf clubs?
Those letters tell golfers flex—the relative stiffness—of that shaft. What Shaft Flex Codes Mean "L" is the most flexible shaft and "X" is the stiffest shaft: "L" denotes "ladies flex"
How do I know what driver Flex I Need?
The simplest way to find out what driver flex you should use is to visit your local fitting professional. They will analyze your swing and determine the best flex for your driver. However, as a rule of thumb, golfers with swing speeds above 100 mph should test a stiff shaft, while swing speeds above 110 mph are better suited to extra stiff shafts.
What do the letters on golf shafts mean?
Those letters tell golfers flex—the relative stiffness—of that shaft. "L" is the most flexible shaft and "X" is the stiffest shaft: "A" or "M" denotes "senior flex" (might also be designated "AM" or "A/M," or "Senior")
How does a golfer's swing speed affect the stiffness of shafts?
The slower a golfer's swing, generally speaking, the more flex he or she requires in the shafts that are in their golf clubs. And the faster the swing, the more stiffness.
What do the letters mean on a driver shaft?
The typical range of shaft flexes available on the market range as follows: TX (most stiff), X (extra stiff), S (stiff), R (regular), A (senior) and L (ladies, least stiff). Some companies use different denominations such as numbers or colors to denote flex, but golfers are most familiar with the letters listed above.
How do you know what shaft stiffness to use?
Take a look at the distance you hit your driver. This is a good, but very general, indicator. If you carry you driver 250 yards or more, go with Stiff; 230-250 yards, Regular; 200-230 yards, Senior; less than 200 yards, Ladies. Only the biggest of the big hitters is going to need Extra Stiff.
What type of shaft flex should I use?
In general, golfers with driver swing speeds over 95 mph should play stiff flex shafts, and those under 95 mph should play regular flex. Shafts also come in extra stiff (105+ mph) and senior flex (under 85 mph).
What do the letters on golf clubs mean?
How numbers translate. Again, breaking it down to its simplest form, the numbers on your golf clubs relate to how far they hit the ball - the lower the number, the further the ball should travel. A club with a #4 on it will hit the ball further than one with a #9 on it.
What happens if driver shaft is too flexible?
Having a shaft that is too flexible can also cause the ball to hook uncontrollably, because the shaft bends incorrectly, it will come through with a closed clubface causing the ball to go left, this is because the shaft can't handle your swing speed, and the head is rotating too much.
What swing speed do you need for a stiff shaft?
Stiff – This range is still considered fast, but you most likely won't be out on Tour anytime soon. If you're between 97 and 104 mph with the driver, you need a stiff flex.
Do any pros use regular flex shafts?
As a whole 90% of the top 100 golfers on the PGA Tour use either an extra stiff or Tour extra flex shaft in their driver. Only a very small number of this elite group, including Brian Harman and Jason Day, use a 'softer' stiff driver shaft while not one of the top 100 uses a regular or regular+ shaft in their driver.
Is regular or stiff flex better?
The regular flex golf shaft is more flexible and easier for slower swing speed golfers to swing than the stiff flex golf shaft. A stiff flex golf shaft creates more resistance in the swing of a golfer. Therefore when they attempt to hit the ball with a bit more speed, they can get the incredible distance.
How can I tell my swing speed?
Divide the ball speed by 1.5 to get the estimated swing speed for your drive. Alternatively, you can divide the carry distance by 2.3 to estimate the swing speed at impact, but the result will not be as accurate.
What does W mean on a golf club?
The term "pitching wedge" is now used by virtually all manufacturers and players to describe this club; Karsten Manufacturing (maker of the PING brand) simply labels their pitching wedges "W" for "wedge".
What does SR mean on a golf shaft?
The basics of shaft flex The SR (Senior) and R (Regular) flexes are geared for slower swing speeds and golfers who need help getting the ball airborne. As your game improves and you start to generate more speed, you'll likely find yourself in an S (Stiff) or XS (Extra Stiff) flex.
What does H mean on a golf club?
Hybrid golf clubs help fill in the gap between your harder-to-hit irons and fairway woods. They are designed for distance, trajectory, control and playability, combining features from irons and fairway woods. They could even replace a fairway wood or iron in your bag.
How do you know if you need a stiff or regular shaft?
To check your swing speed a shot tracking device will be the most accurate method. Based on your swing speeds here are our recommendations: 80-95 mph swing speeds should use regular shafts. 90-105 mph swing speeds should use stiff shafts.
Is 6.5 a stiff shaft?
Have you ever wondered what the number designation on your Project X shaft means? You know, the 5.0, 6.0, 6.5 and so on printed on the shaft. These numbers correspond with flexes from “regular” to “extra stiff plus”.
How do you know if your shaft is too stiff?
There are a few tell tale signs that your shafts are too stiff, firstly you will lose the ball to the right, because the shaft is to stiff it will be hard to square up at impact, causing the face to be open when you hit the ball, this is going to produce a fade or slice shot, generally ending up on the right side of ...
How do I know what shaft I need?
Which flex rating you use will depend on the type of swing you have. For example, beginners and those with less powerful swings tend to use a shaft with greater flexibility to propel the ball more. On the other hand, if a player has a high and powerful swing speed, they will require a stiffer shaft with less flex.
What does playing the right length driver shaft do?
Playing the right length Driver Shaft will increase your accuracy!
What happens if your golf shaft is too light?
A shaft that is too light will cause you to swing out of control and lose consistency. You may lose feel too, which is very important when hitting the driver since it is the longest club in your bag.
What is a tip stiff shaft?
Some shafts are ‘tip-stiff’, meaning the tip section near the clubhead is stiffer in relation to the rest of the shaft. Or ‘grip-stiff’ which keeps the upper end of the shaft firm to help reduce spin.
Why do you need torquing shafts for a high speed swing?
It is very helpful for your miss-hits and for when you make a bad swing. If you’re swinging badly at a high velocity then you need all the help you can get to keep the face as square to the ball as possible.
What is torque in golf?
Torque refers to how much the shaft twists. It’s the least talked about feature but still an important one to club fitters. High torque shafts can twist easily, and low torque shafts are resistant to twisting.
How much does a driver shaft cost?
It always comes down to price at the end of the day and we are always looking for the best deal. A driver shaft can cost anywhere from $40 – $300.
What is a bend profile?
The bend profile takes into account how your entire shaft kicks. Not just the location of one spot. With today’s technology, custom club makers can adjust the shaft at any place. There is no excuse to have the wrong shaft.
jpbova
Does driver lie help close the club face at impact? Meaning if I flatten the lie of a driver will it be more closed at impact
jimb
Malty had this rod that was a attached to a magnet to the face of an iron. Raising the toe off the resulted in the face of the iron resulted in the rod pointing left of the original direction (right handed club). It isn't that the iron face is hooked. It is that the ball will leave on a path to the left of the aim point.
coops
Upright lie will cause a closed face angle at impact - just the same as an upright lie angle on an iron (or playing from a sidehill lie with the ball above your feet).
coops
"Face direction", should have said to be more clear, as in upright lie points the face more left. ( you could have an upright lie that points the face leftward as well as a closed clubface angle at setup when soled for woods/nybrids).
Why are shafts important in golf?
A more flexible shaft can help increase your swing speed. There's a lot of homework a golfer should do before buying a set of clubs, and one of those is learning the options as to which shafts the clubs should have. If chosen correctly, shafts can help you get the most out of your swing, regardless of your abilities.
How many grades of flex shafts are there?
There are five grades of flex from which to choose, and the easiest way to select the right one is to find out how long your drives fly, an indication of your swing speed. The five grades of shafts are ladies, seniors, regular, stiff and extra-stiff. If you hit the ball relatively short, say 175 yards or less, you should probably pick ladies shafts.
What are the shafts made of?
Composition. There are two shafts on the market, ones made of graphite and the others made of steel . Graphite shafts cost more, but they are lighter and easier to hit. And because graphite shafts will contribute to a faster swing speed, you will get more distance on your shots.
Do you need longer shafts for golf clubs?
You might be tall, but you might also have long arms, so you would not need longer shafts. If you have a professional club fitter available, he will measure you correctly and make recommendations as to the correct length of the shafts.
Can a club fitter measure shaft length?
If you have a professional club fitter available, he will measure you correctly and make recommendations as to the correct length of the shafts. Because you would like to get the most distance from your driver, you could decide to add length to the shaft, but you would give up a degree of accuracy, so it's smart to find the common ground.
What Are The Signs Your Driver Shaft Is Too Flexible?
Golfing Youtube legend, Rick Shiels suggests that when your shafts are too soft it kicks the clubhead up at impact and angles it left, for right-handers. That results in unwanted hooks.
How Much More Important Is Choice Of Club Over Shaft Flex?
Of course, you should choose clubs that offer the best performance for your game.
How Important Is Shaft Weight In A Driver?
Having the right driver head weight and degree of loft will be in vain, without the right weighted shaft.
How To Know What Weight Driver Shaft You Should Use?
The most effective way to determine the ideal driver shaft weight is to get fitted by a professional.
How Important Is Driver Shaft Flex Vs Weight?
As Andrew Tursky notes, weight impacts your shots in a similar manner to flex.
How To Know What Driver Flex To Use?
The simplest way to find out what driver flex you should use is to visit your local fitting professional. They will analyze your swing and determine the best flex for your driver.
How Can I Tell My Swing Speed?
When it comes to calculating swing speed, I have to agree with Golfweek’s Lyle Smith.
Why is the shaft shorter on a golf club?
Making the shaft shorter makes the club shorter, the shaft stiffer, and it will adjust the swing weight. Your club will have less flex when you remove weight. A regular flex can become stiff, and a stiff can become extra stiff when you shorter it, but that all depends on how much you shorten it. You need to be sure this is what you want ...
Why is a shorter driver shaft better?
Pros: A shorter driver shaft will shorten the arc of your swing. This will help you to hit the center of the clubface more often. Hitting the center of the clubface more often means you are more likely to keep the ball in play than you were before.
What does a longer shaft mean?
A longer shaft means a wider arc to your swing and that creates more speed. But hitting the center of the clubface is much more important. A shorter driver shaft means a shorter arc in your swing and that makes hitting the center of the clubface easier. Many players don’t lose any clubhead speed when they shorten their driver shaft by about an inch.
What happens if you have a shorter driver?
As we talked about before, a shorter driver will decrease the width of the arc to your swing and increase your frequency of hitting the center of the clubface.
How long is the average driver on the PGA Tour?
On the PGA Tour, the average driver length is 44.5 inches. That’s shorter than the standard 45-46 inches.
Does shortening your driver shaft help?
More practice equals more consistency. Yes, better equipment helps. And equipment that is attuned to your needs helps even more. Shortening your driver shaft could be beneficial for you and combining that with the want to improve is a step in the right direction.
Does shortening a driver shaft make your handicap fall?
Most professional golfers are aware of the benefits that shortening their driver shaft, at least a little, can give them. This doesn’t mean that shorten ing your driver shaft will immediately make your handicap fall. The biggest factor is still your technique and how you play.
ForTourUseOnly
Wichever way the pure machine spits them out......but prey that on shafts with logos that it comes out down. Lol
OUZO Power
Depends on the graphics. On my RAZR FIT I play both shafts I use Aldila RIP Alpha & Fujikura Motore F3 graphics & grip up.
GolfMonster09
I play them down, but not because the graphics distract me. Just like the cleaner look.
GooseHook
It doesn't bother me either way, but it seems like logo up would draw too many complaints if I tried to sell something on here. So, logo down it is. For grips, I put the logo down because I do grips on my own and like to leave margin for error.
When you hit a driver's heel, do you move the sweet spot?
If you consistently hit the heel or toe of the driver, you might adjust the weight to move the sweet spot towards your normal contact point.
What is the best adapter for golf?
Cobra. True to their “golf should be fun” ethos, Cobra has the simplest, best-labeled adapter on the market. Each loft is clearly labeled, and the one you select shows up in a window on the hosel. The “Draw” settings indicated a more upright lie angle.
How many settings does a titleist adapter have?
It’s a two-ring adapter with four positions on each ring – 1,2,3,4 and A,B,C,D – allowing for a total of 16 settings.
What is Opti Fit+?
This is a two-ring adapter, much like Titleist’s, but using it is much simpler. You can use the two rings to select a Neutral (N) or Draw (D) lie angle, and subtract 1° of loft or add 1° or 2°.
What happens when you remove the loft?
When you remove loft, you are opening the face. This is counterintuitive, but if you experiment with your own adjustable driver you’ll see that it’s correct. Set the driver to the highest loft and you’ll see a closed face. Set it to the lowest loft and the face will be open. For those interested in the “why,” here it is: ...
What is Taylormade's higher and lower label?
No one has created more different adapters over the years than TaylorMade. Their current generation of drivers strive for simplicity with their “Higher” and “Lower” labels. This sleeve allows you to add or subtract 2° of loft.
How to adjust a tennis ball?
Moving Weight Towards the Toe or Heel. This is the easiest adjustment to understand: the ball will go towards the weight. If you move the weight toward the toe, the ball will be more inclined to fade or slice. If you move the weight toward the heel, the ball will be more likely to draw or hook.
Flex/Frequency
Length
- The length of your driver shaft will help you control the directionof the ball more. A shorter shaft will give you better accuracy. A longer shaft will give you more distancebut will cost you some fairways in regulation. You will sense a theme in this article that the name of the game is to find balance, and that includes length. There is a perfect length for you. A shorter driver will also affe…
Weight
- The weight of your shaft is going to primarily affect your distance. A heavier shaft will reduce your clubhead speed and thus the amount of energy transferred into the ball. But it’s not as easy as just going out and getting a lighter shaft. A shaft that is too light will cause you to swing out of control and lose consistency. You may lose feel too, which is very important when hitting the driver sinc…
Kickpoint
- Now we are getting into some in-depth driver talk. This is a word you may not hear too often amongst your weekend foursome pals. This refers to a spot or small range on the shaft where it experiences the most bend under duress or that of a golf swing. I’m sure you noticed that the grip end is thicker than the clubhead end. This tapering is different with each shaft and will affect ho…
Torque
- Torque refers to how much the shaft twists. It’s the least talked about feature but still an important one to club fitters. High torque shafts can twist easily, and low torque shafts are resistant to twisting. Not to sound like a broken record but generally, you want your torque to be not too high and not too low. Based on your swing speed, your club fitter can determine how mu…
Cost
- It always comes down to price at the end of the day and we are always looking for the best deal. A driver shaft can cost anywhere from $40 – $300. Yes, one shaft without a head or grip on it can cost $300+. Not many people want to drop that much cash on half of a driver. But that should be proof of how much science and technology goes into these so that we can all hit it a little furthe…
Conclusion
- Fitting yourself for a driver shaft is a bit like trying to do your own plumbing. You could do it yourself but if you get something wrong then you might end up in the water. It’s just easier to hire a trained professional and get it done right from the beginning. Getting fit for a driver shaft is a great learning experience and you will feel like a professional when you get to see all your numb…