What Does S Flex Mean On A Golf Club? The “R” is for regular flex, the “S” is forstiff flex(might also be called “Firm” or “Tour”), and the “X” is for extra stiff flex. Table of contents Does s flex mean stiff? Don’t know what the M stands for, but they are Senior shafts, my whole set are M shafts. The S flex are stiff shafts.
Full Answer
Where can I get a TaylorMade Golf Club fitting?
You can visit www.my.taylormadegolf.com to locate a fitting event or certified TaylorMade fitting location near you. How do I get more distance from a driver?
How can you tell if a TaylorMade club is fake?
Notice the ferrule is much shorter on the counterfeit club. The bottom of the club is more rounded and the bottom grooves starts slightly higher on the face. Counterfeit TaylorMade SpeedBlade Face.
What can I expect from TaylorMade custom fitting?
The fitting process allows us to discover those repetitive motions and subscribe equipment that works along with the consistencies of your swing. What can I expect from a TaylorMade Custom Fitting? Our fittings are designed to give you a high level of trust in your equipment and deliver a club that’s optimized for your swing.
Are You playing the right amount of flex in your golf clubs?
It's important to think about the shafts in your golf clubs, and specifically whether you are playing the right amount of flex. David Cannon / Getty Images Brent Kelley is an award-winning sports journalist and golf expert with over 30 years in print and online journalism.
How do I know if my TaylorMade club is TOUR issue?
The only way to tell a “tour head” from a retail head is to look at the driver's serial number (pictured above). They always start with the letter “T,” which denotes that they were made especially for tour players.
How do I know if my TaylorMade is real?
Authentic TaylorMade golf clubs have a serial number on the hosel of each wood and on the 5-iron or the 7-iron (depending on the model) in each set of irons. If your club does not have that serial number, it may not be a genuine TaylorMade.
Why does TaylorMade tip their shafts?
Hard stepping and additional tipping of a shaft will make the club feel and play firmer than its standard profile (decreases flex). Soft stepping and reduced tipping of a shaft will make the club feel and play softer (increases flex).
What is a good price to pay for golf clubs?
The average cost of golf clubs is between $200 – $400, depending on the type of clubs you need. Golf clubs can cost as little as $2 for a used putter, or $600+ for a brand new driver.
How can you tell knock off TaylorMade?
4:5112:51How to Spot a Counterfeit Golf Club | The Hot List - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou see a little bit of difference in the coloring on the grooves on the face a little bit brighterMoreYou see a little bit of difference in the coloring on the grooves on the face a little bit brighter up here a little bit grayer down here ditto with the twist face a little bit brighter up top not.
Can I check TaylorMade serial number?
The serial numbers can be found etched into the back of the hosel on drivers, fairways and rescue clubs. For iron sets, the serial number can be found on the 5-iron (or the 7-iron for newer product), and neither wedges, putters nor balls will have a serial number.
How much should I tip my shaft?
Some manufacturers recommend tipping shafts certain amounts for specific swing speeds and miss tendencies. These recommendations can range from 0.25 inches to 1.5 inches and vary from product to product and manufacturer to manufacturer.
What can I expect from a TaylorMade fitting?
0:132:00TaylorMade Fitting Day - Whats involved - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd we're just going to collect a light a pruning just to ascertain how the turf interaction is withMoreAnd we're just going to collect a light a pruning just to ascertain how the turf interaction is with your golf. Swing. So this impact location here grant is telling us that it is toward the toe.
How long does it take TaylorMade to build clubs?
How long does it take to get my custom clubs after I've placed an order? If all necessary components are in stock, most custom orders are assembled and shipped within 3-4 business days. PLEASE NOTE: Component availability can have an effect on your orders build time.
What is the markup on golf clubs?
around 33.33%After all expenses, the best golf retailers rarely profit more than 2-3% of the total cost of a club. However, as a whole, we can say that around 33.33% of the cost of a golf club is the markup from the retailer.
How long should golf clubs last?
Taking into account the different factors we've discussed, a quality set of golf irons can last anywhere from 8 to 10 years with proper care, and sometimes up to 12 years. Remember, if you take care of your golf clubs, they'll take care of you!
How much does a full bag fitting cost?
Full Bag & Full Bag with Putter Fitting In the Full Bag WITH Putter Fitting, the client and fitter work through every club in the bag, including the putter. The cost of a True Spec Full Bag Fitting is $350 and a Full Bag with Putter Fitting is $450.
Why is the fitting process important in golf?
The fitting process allows us to discover those repetitive motions and subscribe equipment that works along with the consistencies of your swing.
What does high launch mean in golf?
For many players, high launch + low spin = more distance. However, there are instances where increased spin is to the benefit of the player (for players that are launching too low with too little spin or those with moderate swing speeds, where spin helps keep the ball airborne).
How many wedges should I use for a golf swing?
In general, golfers will carry 3-4 wedges (including PW) with a loft separation of 4-6° between each wedge. Knowing your PW loft is the first step to determining loft for your additional wedges. Your loft configuration can also vary based on the type of shots you prefer to play.
How to determine the proper lie angle for irons?
A custom fitting is the best way to determine the proper lie angle for your irons. However, there is a quick way that you test it out on your own. Get a black marker and draw a straight line on your golf ball. Place the ball on the ground with the line vertically facing your club.
How to choose shaft flex?
These are just general guidelines, however; the best way to choose shaft flex is to go through a club fitting. Not every golfer can (or is willing) to do that, though.
Why do golf shafts bend?
Shaft makers vary the amount of stiffness because golfers have different types of swings—different swing speeds, different tempos—and different amounts of stiffness in a shaft better match up to those different swings.
What happens if you mismatch your golf shaft?
If your swing is mismatched to your golf shaft flex—if you are using an X flex shaft, for example, when you should be using an R flex shaft—you will have a harder time squaring the clubface at impact. The way your shots are flying can clue you into the possibility you might be using the wrong flex.
What does it mean when a golfer's swing is slower?
The slower a golfer's swing, generally speaking, the more flex he or she requires in the shafts that are in their golf clubs. And the faster the swing, the more stiffness. Tempo also matters: A jerkier swing requires more stiffness, a smoother swing less stiffness, generally speaking.
Why is softer flex better for macho men?
Choosing a softer flex often has the effect of forcing macho men to slow down their swings. And slowing down the swing often makes those macho men into better golfers. And the fact is, the harm in hitting a shaft that is too flexible is much less than the harm in hitting a shaft that is too stiff.
What does flex mean in golf?
"Flex" refers to the ability of a golf shaft to bend as forces are applied to it during the golf swing. Those forces are generated by the type of swing that you have: fast or slow, smooth or jerky.
What is the key to a club fitting?
The key, short of a club fitting, is hitting lots of different clubs and watching the effect that changing shaft flex has on your shots. If you find a flex that feels good and produces a good ball flight, there's a good chance that's the right flex for you.
What shaft do you need for a jerky swing?
A swing that gets jerky at the top—when transitioning into the downswing—will probably need a stiffer shaft. If your drives go left, you might benefit from a stiffer flex; if your drives go right, you might benefit from a softer flex.
What are the ratings for shaft flex?
There are five generally used ratings for shaft flex: Extra Stiff, Stiff, Regular, Senior and Ladies, usually denoted by the letters X, S, R, A and L ("A" is used for Senior because this flex was originally called "amateur").
What is a club fitting demo day?
At demo days, you'll be able to hit many different types of clubs with different types of shafts. Or find a good pro shop with swing bays where you can try before you buy. The key, short of a club fitting, is hitting lots of different clubs and watching the effect ...
What is the first thing you notice about a fake golf club?
The first thing you will notice about a fake club is the quality doesn’t compare to the real deal. If held side by side with an authentic club, it will be easy to identify the counterfeit golf club because of the inferior quality.
Where are the stickers on golf clubs?
Most stickers on authentic clubs are placed on the underside of the shaft up by the grip or down next to the ferrule. Counterfeit clubs usually have this sticker near the shaft band on the top of the shaft so it is easily visible. They figure it will make it look more authentic I suppose.
What is Taylormade serial number?
TaylorMade serial numbers are normally put on with a laser and are smooth to the touch just like most counterfeit clubs. Normally, the counterfeit serial numbers are in a different font and specifically a larger font.
Why is the head weight of a counterfeit driver heavier than the head weight of an authentic driver?
Head weight on counterfeit drivers is normally heavier than authentic drivers because they are not made of titanium. You can also try the magnet test on your driver to see if it will stick.
Can you verify a club serial number?
Most manufacturers do not offer a way for you to verify whether or not a serial number is authentic. The main reason for this is counterfeit club makers can easily take an actual serial number and stamp it onto their clubs. There are a couple of manufacturers that allow you to register your clubs on their website.
mookie
Can anyone help me to better understand how the serial number thing works?
dmitry
When I bought some Taylormade irons, I called Taylormade, and the guy told me my serial number was not in his database. However, when I went to the website the registration went through normally.
electroleum
Ping definitely leads the pack when it comes to serial #'s and tracking. I've never been able to comprehend how TM can keep track of all their serials, especially being the biggest volume clubmaker out of the bunch.
markheardjr
Since it was brought back from the dead (a couple different times it appears) I'll tell you my story that's similar. I sold my buddy a TM CGB Max Limited driver (one with 3 interchangeable shafts) that I had purchased on eBay.
Pudgelewis
Just got off the phone with TM, tried to confirm a tour issue club, all he could confirm was that it was indeed tour issued, came off one of their tour vans, but he could not disclose any other information due to the fact that it's tour issue.
hattrick3518
Just got off the phone with TM, tried to confirm a tour issue club, all he could confirm was that it was indeed tour issued, came off one of their tour vans, but he could not disclose any other information due to the fact that it's tour issue.
hansmoleman
That's typical of TM, as far as I know. I bought my Rocketbladez Tour irons from Dick's, and the serial numbers were different throughout. If you go to the website, they'll tell you that the serial number that counts is the 7 iron (5 in older TM sets).
