What do shaft flex codes mean on golf clubs?
Those letters tell golfers flex—the relative stiffness—of that shaft. What Shaft Flex Codes Mean "L" is the most flexible shaft and "X" is the stiffest shaft: "L" denotes "ladies flex"
What is the difference between a 4444 and a 6666 flex code?
For simplicity, a 4444 code shaft will play softer than a 6666 code shaft but both are designated nominally as stiff. I had a Miyazaki R-45 shaft in a Srixon F45 5 wood that I bought, it had a flex code of 6423 and was nominally classed as stiff but you can see from the 23 how soft it was in the bottom half of the shaft.
What do the letters on golf shafts mean?
Those letters tell golfers flex—the relative stiffness—of that shaft. "L" is the most flexible shaft and "X" is the stiffest shaft: "A" or "M" denotes "senior flex" (might also be designated "AM" or "A/M," or "Senior")
Why do golf shafts have different amounts of stiffness?
Shaft makers vary the amount of stiffness because golfers have different types of swings—different swing speeds, different tempos—and different amounts of stiffness in a shaft better match up to those different swings. The slower a golfer's swing, generally speaking, the more flex he or she requires in the shafts that are in their golf clubs.
What do the numbers on the shaft of a golf club mean?
These numbers are the weight of the shaft in grams. Shaft weights typically range between 50 grams and 85 grams with the 50-60 numbers being pretty common as seen in the example shafts above.
What do the letters mean on a golf shaft?
Eventually, the shaft industry developed five different shaft flex designs, designated by the letters L for Ladies; A for Amateur, which evolved into the senior flex; R for Regular; S for Stiff and X for Extra Stiff.
How do you read a golf shaft?
Put simply, the higher the rating, the more the shaft is prone to twisting. It is the torque that also determines how the shaft feels to every player, which means that the higher the rating, the softer the shaft will feel. A shaft with a 3-degree torque will feel much stiffer than a 5-degree torque, for example.
What does international Flex mean?
The International Flex Code is a four number sequence. The numbers represent the stiffness of each of the four sections of the shaft: butt, mid-butt, mid-tip, and tip. The numbers range from 0 to 9, with 0 representing a very soft section and 9 representing XX-Stiff.
What do the numbers and letters mean on golf clubs?
The higher the golf club number, the more loft, the more intense the angle on the golf club face, which means the golf ball will travel higher, but for a shorter distance.
What does shaft flex 5.0 mean?
Regular PlusRegular Plus – 5.0. Stiff – 5.5. Stiff Plus – 6.0. Extra Stiff – 6.5. Extra Stiff Plus –7.0.
How do you know what shaft stiffness to use?
The higher the speed, the stiffer the shaft. Steel shafts, which are heavier than graphite, are stiff and less forgiving than graphite. According to Golf.com, graphite shafts are lighter and can help increase swing speed. Selecting the right flex for your shaft is key to good ball striking.
What flex shaft do I need for irons?
Should You Use Regular or Stiff Flex Shafts?6-iron Carry Distance6-iron Swing SpeedShaft flex (all clubs)< 130 yards60 – 70 mphSenior Flex131 – 155 yards71 – 80 mphRegular Flex156 – 175 yards81 – 90 mphStiff Flex> 176 yards91 + mphX-Stiff FlexApr 13, 2021
What swing speed requires a stiff shaft?
between 97 and 104 mphStiff – This range is still considered fast, but you most likely won't be out on Tour anytime soon. If you're between 97 and 104 mph with the driver, you need a stiff flex. Regular – Now we are getting into the range where a majority of recreational golfers fall, and also where many LPGA pros fall.
What are the different flex types for golf clubs?
There are five flex ratings for golf clubs--extra stiff (X), stiff (S), regular (R), senior (A) and ladies (L). Generally, the faster your club speed, the stiffer the shaft, but use care when selecting a flex. If you are not certain or in between flexes, it is better to select a softer flex than a stiffer one.
What is a tour flex shaft?
The “T” as we will show in a couple of examples refers to Tour flex. So the TS are short for Tour Stiff. This is a flex that is stiffer than traditional S flex but softer than X flex within the same family of shafts. TS may be equivalent or a cross-over to the SX designation.
What is S flex shaft?
Firm Shaft More commonly known as the stiff shaft (S), this flex is favored by golfers who have a fairly fast swing and drive the ball 250 yards on a consistent basis. Golfers who play a firm or stiff shaft have club speeds between 90-105 mph.
How many grams are Miyazaki shafts?
Keep in mind some of those older Cleveland Miyazaki shafts were 39 grams and 50 gram models. Made to be soft not to be strong. They currently offer 4 models for 4 different player dynamics with several weight options
Is a 4444 shaft stiff?
Yes the stiffs seem more like a R.the R flex very soft. The international flex code is the key to understanding their shaft profiles and whether a shaft will play 'soft' or 'hard' to flex. For simplicity, a 4444 code shaft will play softer than a 6666 code shaft but both are designated nominally as stiff.
How to determine golf shaft flex?
Start by using a launch monitor to analyze your golf swing speed. If your swing ranges between 85 mph and 95 mph then you should start with a regular flex. If your swing speed is faster than 95 mph, then you should try a stiff shaft.
Why do golf clubs have shafts?
During the golf swing the shaft causes deflection (bend) that causes the clubhead to be in a forward and toe downward position relative to the grip of the club.
What is the best shaft for golf?
Steel – A steel golf shaft is usually stronger and more durable (less likely to snap) than a graphite shaft. It’s also less expensive and sometimes stainless steel is used in the creation of the steel shaft. There is also two variations, stepped steel and rifle steel.
Why does my golf shaft have a slice?
When the golf shaft is too stiff, it doesn’t unload properly at impact. This can lead to the face staying open and result in a slice golf shot. Beware, a slice isn’t always an indication the shaft is too stiff so if you already have a slice, it could be caused by another fault in your golf swing.
What shafts do golfers use?
For most golfers, a graphite shaft works great. Most iron sets are made with graphite shafts as well so you get that material type by default usually unless you specifically seek out steel shafted irons. With steel shafts, you may find that golf shots are easier to control.
What is the most common shaft material used in golf clubs?
Graphite Shafts. Graphite – this type of shaft is usually lighter weight compared to a steel shaft but it’s less durable and more expensive to make. Graphite is one of the most common shaft types used in golf clubs and can arguably be considered the main shaft material used, beating out steel.
What to know about golf shafts?
In today’s guide we will review everything you need to know about golf shafts. Picking out the proper golf shaft is very important as it will impact several components of your golf swing. For example, picking the wrong golf shaft flex can cause you to hook or slice the golf ball. It also can hinder the total distance the ball flies by having too much spin or too low of launch. But don’t worry, at the end of reading today’s guide you’ll be much more educated on the buying process and how to pick out the right golf shaft. Lets Get Started!
What Is Shaft Flex?
Shaft flex is the degree to which the shaft will bend or flex during the swing. A more flexible shaft bends easily during the swing and has the potential to produce a longer-ranged shot.
How Does Shaft Flex Impact Your Golf Game?
The shaft flex of your golf club has an immense effect on the game’s outcome as a whole. From high irons to wedges and drivers, you have to make sure they have the correct flex for trajectory, accuracy, and distance.
How to Choose the Shaft Flex for You?
You can know the correct flex for your shaft by evaluating your swing at a golf equipment store. They’ll check all kinds of things like ball speed, distance, clubhead speed, spin, and many other factors. They also try several shafts in the same driver head to give the most accurate results.
What Shaft Flex Should You Use for The Driver?
It would be best if you choose the stiffest shaft flex for your driver because it is often the club that has the maximum swing speed. Since it carries the maximum swing speed, you may consider choosing the most accurate shaft flex.
How to Determine the Right Flex for Your Iron?
Choosing the right flex for the iron depends on the club you use for hitting a 150-yard shot. If you’re about to take a 150-yard shot, consider using these flex for your irons.
Final Thoughts
When selecting a flex for the shaft in your clubs, the tradeoff is between accuracy and distance. Choosing a senior flex helps you to achieve greater distance due to its flexibility but at the cost of lower accuracy.
Golf Practice Plans with Step by Step Schedules to Follow
Or hop onto our email newsletter and get the free weekly golf tips we send out to our community plus updates and other announcements you don’t want to miss!
What is the kick point of a golf shaft?
KICK POINT: Modern shafts, particularly graphite shafts, can produce kick in different sections of the shaft — high kick, mid kick and low kick being three obvious points of reference. Fitters often spend considerable time matching a golfer’s swing with a particular kick.
Where is the ferrule on a golf club?
FERRULE: The ferrule is an oval piece, commonly made of plastic, that is located just above the neck of the clubhead. Modern ferrules not only are decorative, they are made with great precision to provide accurate and secure bonding between the shaft and clubhead. BUTT: The top end of the shaft, called the butt, is located underneath the grip.
How much does a true temper iron shaft weigh?
True Temper’s Dynamic Gold, the most popular steel iron shaft on the PGA Tour, weighs abourt 130 grams. At the other end of the spectrum, Mitsubishi Rayon has a Bassara graphite driver shaft that weighs about 35 grams. RAW: A raw shaft is an uncut shaft that has not been installed in a clubhead.
What is a raw shaft?
RAW: A raw shaft is an uncut shaft that has not been installed in a clubhead. BLANK: This is another word for a raw shaft. When clubmakers refer to a blank, they mean a raw shaft. SPINE ALIGNMENT: Golf shafts, because they are round and hollow, have a spine that is a result of the manufacturing process.
What is the tip of a golf club called?
TIPPING: The tip end of the shaft, which is inserted into the clubhead, sometimes is cut or trimmed to provide more stiffness in the shaft. This is called tipping. While the practice is common on professional tours, it is not widely used among amateur golfers.
What does low torque mean on a golf swing?
Normal measurements are in the 2- to 6-degree range. A low torque number means less twisting of the shaft but also can mean a harsher feel . A high torque number is associated with a soft-feeling shaft, although there may be a sacrifice in accuracy. FLEX: The strength of a shaft as it bends during the swing.