Most likely, it means that a club is 2 degrees more upright than the standard lie angle for that brand and model. For example, if a 5 iron has a standard lie angle of 62 degrees, but you either custom order it or have it adjusted to be a lie angle of 64 degrees, then it would be considered to be 2 degrees upright. How Lie Angle Affects Ball Flight
What does 2 degrees upright mean on golf clubs?
Most likely, it means that a club is 2 degrees more upright than the standard lie angle for that brand and model. For example, if a 5 iron has a standard lie angle of 62 degrees, but you either custom order it or have it adjusted to be a lie angle of 64 degrees, then it would be considered to be 2 degrees upright.
Why do golf shafts have tipped tips?
The tipped shaft cuts away this stiffness and results in a softer tip than the original design. One golf instructor looked at this illustration and commented that on this shaft tipping would move the soft section closer to the tip creating higher launch and spin.
What does “tipping” mean in golf?
“Tipping” or “tip trimming,” as it’s sometimes called, means trimming a club shaft from the clubhead end, not from the grip end where it’s most often cut. Irons
What is the difference between tip and handle trimming in golf clubs?
On the other end of the shaft is the handle, which is also generally trimmed some amount when building a golf club. Handle trimming doesn’t affect shaft flex as much as tip trimming because most shafts become gradually stiffer as they move from tip to handle.
What does +2 lie angle mean?
Two degrees upright means that a golf club has a lie angle that is two degrees upright of standard.
What does 2 degrees flat mean in golf clubs?
A golf club can be bent two degrees flat when the lie angle is lowered and the heel of the club is raised to a position that is higher than the toe of the club. Golfers change the lie angle of a club to better their chances of hitting the center of the clubface.
What does degrees mean on golf clubs?
The degree of loft on golf clubs helps separate them from each other as the loft influences the flight and distance of shots. A lower loft can potentially hit the ball further whilst a higher loft launches the ball up into the air with more spin.
What does 1 degree upright mean in golf?
Lie Angle Defined If the lie angles of your clubs are 1 degree greater than the manufacturer's standard, your clubs are 1 degree flat. If your lie angles are lower by 1 degree, the clubs are 1 degree upright.
Does 1 degree lie angle make a difference?
Yes it will make a difference, I play 2 degree upright and +1/2. If your hitting the ball left all the while (I am guessing your right handed) won't be to do with having the lye angle to flat.
What is the best lie angle for a driver?
Most standard golf drivers are going to have between 56 and 60 degrees for their lie angle. The lie angle is the number of degrees between the center of the hosel and the ground line. This angle needs to be measured while the club is on the ground.
What degree is every golf club?
Golf Club Loft Chart – What Is the Standard Loft On Golf Clubs?GOLF CLUBSTANDARD LOFT ANGLE3-IRON21 degrees4-IRON24 degrees (19 degrees – stronger loft in a game improvement set)5-IRON27 degrees (21 degrees – stronger loft in a game improvement set)6-IRON30 degrees (25 degrees – stronger loft in a game improvement set)17 more rows
What degree driver hits the farthest?
The low loft of a golf driver is very surprising from the perspective of physics. Everyone in freshman physics learns that the optimal launch angle for a projectile - the angle that makes a ball fly the farthest - is 45 degrees.
What lie angle should my irons be?
Lie angles almost always range from the mid-50 degrees (in drivers) to the mid-60 degrees (in short irons). In irons, the range is typically from 59 or 60 degrees to around 64 degrees. (Lie angles on putters reach into the 70s.)
What happens if a golf club is too upright?
But if your clubs are too upright, the toe would be off the ground, and you'd have a tendency to pull the ball (inset, top). Too flat, and the heel would be up, and you'd tend to hit pushes (inset, bottom). Starting with the face slightly off can produce exponential misses, so make sure your clubs fit.
Do shorter golfers need flatter clubs?
Generally, shorter golfers will need a flatter lie angle, whereas taller players will need a more upright lie angle. If you hit a lot of shots toward the toe of your club and your ball tends to fade to the right, you probably have a lie angle that is too flat for you.
Should irons sit flat at address?
How should a golf club lie on the ground? The golf club should address the ball with the toe set a few millimetres in the air – the clubhead should never sit flat on the turf. You should be able to fit a small coin under the toe of the club at address, with the heel remaining in contact with the ground.
What does it mean to tip a golf club?
“Tipping” or “tip trimming ,” as it’s sometimes called, means trimming a club shaft from the clubhead end, not from the grip end where it’s most often cut. ...
What is a hard step in golf?
A “hard step” is to put a 5-iron shaft into a 4-iron clubhead and so on through the set. This makes the shaft play a little stiffer. A “soft step” is the opposite — it means putting a 3-iron shaft into a 4-iron head (and so on through the set) to make the shaft play a little softer. To receive GOLF’s all-new newsletters, subscribe for free here.
What is a parallel shaft?
A parallel shaft is one that has a constant diameter from the tip and up to a specified distance on the shaft. Conversely, a taper tip is as it’s described — the shaft tapers towards the tip. Most new clubs (irons and woods) are designed to accommodate parallel shafts, but can also accommodate a taper shaft using brass adapter shims.
Does tipping affect spin rate?
Lastly, tipping won’t do much to affect spin rates and launch angle — two popular misconceptions when it comes to trimming the lower end of a shaft.
What are the myths about the shaft?
The Myths. Myth #1 – Tipping a shaft changes the feel. Myth #2 – Tipping a shaft will reduce spin. Myth #3 – Tipping a shaft will reduce launch angle. Myth #4 – Tipping a shaft will improve accuracy.
Can you buy accuracy with a stiffer shaft?
You can’t buy accuracy with a stiffer shaft, and you can’t get it by tipping your shaft either. None of our testers saw the 1″ tipped shaft stand alone for accuracy, though two were equally (or near equally) accurate with the 1″ tip and the untipped shaft.
Does a tipped shaft lower spin?
Tipping a shaft, just like choosing a stiffer flex, does not guarantee lower spin. As our players moved from the untipped shaft to the 1/2″ tip to the 1″ tip, two of them did see lower spin. However, two of them registered their highest spin numbers with the most heavily-tipped shaft.
Does tipping a golf shaft help with accuracy?
Conclusion. If you want a shaft to feel stiffer, tipping it will get results. However, tipping (just like playing a stiffer shaft) is no guarantee of lower spin, lower launch, or greater accuracy. If you’re interested in maximizing your distance off the tee and hitting more fairways, the best approach is to work with a high quality club fitter.
Where does Matt Saternus live?
He's worked in nearly every job in the golf industry from club fitting to instruction to writing and speaking. Matt lives in the northwest suburbs of Chicago with his wife and two daughters. Latest posts by Matt Saternus ( see all)
What is shaft tipping?
Shaft tipping is when a club builder removes length from the tip section of a shaft, which is the end where the clubhead is installed. In most cases, tip trimming a shaft makes it meaningfully stiffer. It also increases torsional stiffness, known as “torque,” which is a shaft’s resistance to twisting. On the other end of the shaft is the handle, ...
How much should a golf tipping shaft be?
These recommendations can range from 0.25 inches to 1.5 inches and vary from product to product and manufacturer to manufacturer.
Why is tipping so complicated?
The reason tipping is so complicated is first and foremost the way most golf shafts are made. As we describe in this article, nearly all golf shafts on the market are made by hand with a decades-old process known as the Roll-Wrapping Method. Because these shafts are made by hand, it’s impossible for even two shafts that are supposed ...
Why do you tip a golf shaft?
Here’s another way to understand why tipping makes a shaft meaningfully stiffer. When you cut off a portion of the softest part of a golf shaft ( the tip), it increases the overall stiffness. The handle section of a shaft, on the other hand, is longer and more uniformly stiff, so removing material from the handle does not make such ...
Does trimming a shaft affect flex?
Handle trimming doesn’t affect shaft flex as much as tip trimming because most shafts become gradually stiffer as they move from tip to handle. For that reason, trimming the handle section of a shaft does not dramatically increase shaft stiffness. Here’s another way to understand why tipping makes a shaft meaningfully stiffer.
What does it mean when your divots are deeper on the toe side than the heel side?
If your divots are deeper on the toe side than the heel side (toe down, heel up at impact) or deeper on the heel side than the toe side (toe up, heel down at impact), that's a sign your lie angles might be too flat or too upright.
What is the lie angle on a 9 iron?
Upright lie angle: A lie angle that is higher than the standard lie angle (a 66-degree lie angle on a 9-iron is more upright than the standard 9-iron lie angle of around 64 degrees). You might hear a golfer (or clubfitter) saying things such as, "You need flatter lie angles on your irons," or "I had my irons bent 1-degree upright.".
Why is a proper lie angle important?
Proper Lie Angle Is More Important in Irons Than in Woods. Don't misunderstand: Lie angle is an important factor in all golf clubs, even the putter. But having improperly fit lie angles causes more problems in irons than in the woods.
What is lie angle?
Lie angle is a factor that affects the accuracy of golf shots. Golfers who use clubs whose lie angles don't fit their body types and/or golf swings are costing themselves strokes. Matching the lie angle of clubs to the specific golfer is one of the goals of a clubfitting session.
What is the lie angle of a golf club?
The "lie angle" of any golf club is the angle formed between the center of the shaft and the sole, or ground line, of the club when the club is soled in its proper ...
What does it mean when your toe is up at impact?
A toe-up position at impact indicates that your lie angle might be too upright; a toe-down position (meaning the club's heel is higher than the toe) at impact indicates that your lie angle might be too flat.
What happens if the lie angle of your golf clubs is ill-suited to you?
When the lie angle of your clubs is wrong for your swing or body type, you can put a great swing on the ball and still have problems with accuracy. Poorly fitting lie angles create pushes and pulls and other mishits.