Full Answer
What causes a Yamaha golf cart to run and then stop?
A Yamaha golf cart can run and then stop because of loose spark plugs, a problem with the fuel supply, or problems with the transmission of torque. To check if there is a problem with the fuel supply, spray starting fluid on the carburetor as soon as the cart stops during a run.
What should I do if my electric golf cart won't run?
Don't let an issue with your electric golf cart keep you from the greens. As with other mechanical issues, the sooner you tackle the problem, the sooner you can get your cart up and running efficiently again.
How to tell if Yamaha golf cart batteries are bad?
You can determine if your Yamaha golf cart’s batteries are in good shape by following these steps: You should have a digital voltmeter (DVM) ready. Place the probes on the positive and negative posts of the battery pack. Press the pedal. Your batteries are not in good shape of there is a fall in voltage by five to eight volts.
How do you fix a Yamaha G1 golf cart that is slow?
A slow Yamaha G1 golf cart can be fixed by simply cleaning the battery terminals, spark plug terminals, and motor terminals. If the battery terminals are greasy, the current from the battery will be low and in turn, the acceleration will be lower than what it should be.
What causes an electric golf cart to stall?
The most common reason why your golf cart is stalling is due to a bad solenoid or a faulty speed controller. What is this? The solenoid wears out every time the gas pedal is pressed down. The solenoid gets pressed down to a thin plate.
Why does my golf cart go then stop?
In some cases, this happens because the coil of the battery is worn out or is too old. It can also be a sign of a faulty battery or even loose connections within the solenoid. Additionally, you could be dealing with overheated contacts. This is an issue you need to take seriously.
Why does my electric golf cart hesitate when I accelerate?
If your cart does not start smoothly, hesitates before starting, or does not gain speed properly, these are all signs of a bad or damaged accelerator.
How do I reset my Yamaha electric golf cart?
First, you'll want to reset your motor. It should have a small reset button (Usually it will be red) located near the main battery supply. Hit the reset button and then put the cover back on the motor. The next step would be to recharge your cart and try turning it on again. If it starts up then you're in luck!
How do I know if my electric golf cart motor is bad?
You have enough going on in your life without your golf car refusing to start when you turn the key in the ignition. If your golf car won't start, is slower than it used to be, or is experiencing other technical problems, you could have a bad motor on your hands.
How do I know if my golf cart controller is bad?
X Common Symptoms of Controller FailureTop Speeds Not Appropriate for Your Cart. Golf carts are designed to reach pretty specific speeds and to not go over them or beneath them. ... Sudden and Unexpected Slowing. ... Shuttering or Shaky Driving. ... Stalling Out and Refusing to Start. ... Surges in Speed When Driving.
Why does my electric golf cart go slow uphill?
The Reason Your Electric Golf Cart Goes Slow Uphill? Your electric golf cart can struggle on inclines for a variety of reasons. Weak batteries, incorrect tires, and wear and tear to the motor and wiring are all potential causes of your cart's slow speed.
What would cause an electric golf cart not to move?
Solenoid Wear When there is a disruption in the flow of the electrical current, your cart will not operate. A common reason for current disruption is solenoid wear. Each time the solenoid activates as you press down on the gas pedal, the solenoid compounds down onto a thin metal contact plate.
What are the symptoms of a bad solenoid in a golf cart?
If your golf cart fails to turn on when you turn the key on, this is the most obvious sign of solenoid failure. The solenoid clicks a little with the ignition system in regular operation; in most cases, a failing solenoid will not snap.
Is there a reset button on a Yamaha golf cart?
The Simple Motor Reset Process Electric golf cart motors have a reset button on their chassis which is designed to put your motor back into its original factory state.
How do I test my Yamaha golf cart speed controller?
How do I test my Yamaha g16 speed controller?Keep the key on.Press down the accelerator.If you hear a clicking noise, the solenoid is working. Otherwise, there is a problem.Next, examine the controller for defects. ... If the wires are damaged, replace them to get back the speed.
How do you fix a golf cart that won't move?
When the cart won't move, you have to be sure that the batteries are sending sufficient power to the circuit. You must check the fuse. Use the voltmeter to check the voltage at the key switch. In a cart with batteries rated at 48V, it must show 48V at the key switch.
Why is my golf cart not accelerating?
When your electric golf cart does not accelerate, the first thing you need to keep in mind is that it is not a regular vehicle like your car . That's why the methods and solutions you use to get your car to start are not the same as the solutions you can apply to your cart.
What happens if your golf cart doesn't accelerate?
Bad Solenoid. If your golf cart does not accelerate, there is a possibility of the damaged solenoid. The solenoid is basically an electrical switch that enables the battery's flow from the battery into the motor. Check out the signs of the bad solenoid.
Why is my golf cart speed controller not working?
There are many reasons behind a speed controller malfunction. The most common problem that happens in the controller has aged due to infrequent use. These are just some of the issues that could be affecting your vehicle's acceleration. If you have trouble finding the issue of your golf cart accelerator, don't be afraid to take it to the mechanic.
How does a golf cart solenoid work?
The golf cart speed controller and solenoid are both controlled by the accelerator. The pedal is connected to the potentiometer. That means when you are pressing the pedal for acceleration, you are actually going through the potentiometer by pushing a rod. The potentiometer works as a communicator and tells the speed controller how much voltage it ...
How does a potentiometer work?
The potentiometer works as a communicator and tells the speed controller how much voltage it has to consume. The more voltage means the more speed and vice versa (Check out our resource on golf cart speed ).
Why is my Yamaha golf cart so slow?
The main reason why a Yamaha golf cart runs slow is because of low battery charge, dirty battery terminals, or a loose spark plug. A Yamaha golf carts slow speed can be traced to other reasons as well: A battery with a low charge. Loose or dirty battery terminals. Conductor plates are not exposed to enough distilled water.
Why is my Yamaha golf cart so slow to start rolling?
If the spark plug is loose or dirty , a Yamaha golf cart will be slow to start rolling as the torque delivered will be lower than the expected value. Cleaning and maintaining the spark plug gap can help fix this issue. The electrode color for the spark plug is expected to be tan.
How to increase torque on Yamaha golf cart?
How to increase torque on a Yamaha golf cart: Replacing the current battery with a higher-rated battery can help increase the power output of the cart, thereby increasing the top speed by 2-3 mph. Replacing the normal tires with larger, say double the regular-size tires, can increase the speed of a Yamaha Golf Cart by 3-4mph.
How fast does a Yamaha golf cart go?
How to Make a Yamaha Golf Cart Go Faster. Yamaha Golf Carts, on average, offer speeds of around 15mph. Many users wish to get a bit more from their golf carts by increasing the speed by another 4-5mph.
How to fix a slow Yamaha G16?
A slow Yamaha G16 can be fixed by cleaning up the motor cabinet or carburetor that may have debris or dirt inside. Given below are the steps you can follow to get the carburetor of your Yamaha G16 cleaned up. Bring the golf cart to ground level. Remove Air Cleaner. Remove Float Bowl.
How to check battery voltage on Yamaha golf cart?
The pack voltage of the batteries installed on your Yamaha golf cart can be checked by connecting a voltmeter to the positive and negative terminals of the battery. When going uphill, brakes and bearings tend to drag the cart back if they have not been lubricated properly.
What is a low charge battery?
A battery with a low charge. Loose or dirty battery terminals. Conductor plates are not exposed to enough distilled water. Loose spark plug No clicking noise when the accelerator is pressed. Damaged spark plug. No clicking noise when the accelerator is pressed, despite the wires being tightly in place.
Why is my Yamaha golf cart not moving?
The main cause of a Yamaha golf cart clicking but not moving, is a faulty controller or solenoid. The battery has to be checked first to see if it’s delivering the right voltage while in the idle state as well as when the pedal is pressed. There can be other reasons for the Yamaha golf cart not moving though you hear the click.
What to do if your G9 golf cart is not clicking?
If you find your G9 Yamaha golf cart not starting nor clicking, check the key components for damage. If you find the parts to in good condition, check the brushes in the starter/generator.
Why is my solenoid not clicking?
The reason why the solenoid is not clicking could be that it is faulty or has no grounding. Experts recommend checking all wiring and cable connections to rule out this possibility. Batteries on your G16 Yamaha golf carts should raise sufficient power to reach the solenoid and the starter/generator.
What is a faulty controller?
The controller is one major component that may have to be replaced. A faulty controller can stall the cart and the click you hear must be from the solenoid. Test the solenoid to see if it is functioning properly. You will require a multimeter, preferably a digital one, or a DVM for this.
How to check solenoid on G9 Yamaha?
The solenoid can be checked using an old screwdriver to jump the terminals. Your G9 Yamaha golf cart’s key must be in the start position. If the starter turns when you do this, your solenoid needs to be replaced. You must be careful while doing this crude test; there could be sparks when the two terminals touch.
Why do you need a wiring diagram?
A clear wiring diagram will help in ensuring that the cables are properly reconnected if you remove them for testing. In the solenoid, for example, the contacts inside can get jammed over a period. These have to be checked, cleaned, and re-fixed. If it still doesn’t work it has to be replaced.
What does a Yamaha cart run on?
Yamaha carts run on electricity generated by an acid-based rechargeable battery and most problems can be traced to this source. If your cart is sluggish or won't start, the battery may need to be charged. If it is charged, but still not working properly, make sure the battery terminal connections are clean and secure.
Why is my golf cart not clicking?
This insulated wire channels the electric current from the battery that powers the cart. If you press on the cart's accelerator and do not hear a clicking sound, the solenoid wires may need tightening.
Do Yamaha golf carts need maintenance?
Yamaha golf carts, like any other machine, will occasionally require troubleshooting and maintenance to ensure that they are functioning properly. Learning to troubleshoot your cart will help you recognize any potential problems before they become serious issues or safety hazards.
Why does my golf cart spin out?
The brake bub will spin out when there is too much load to prevent any damage to the rear axles, causing the golf cart to stall on hills. Remove the covers from the rear wheel. Notice the castle nuts that are holding the hub to the axles. Apply the brakes.
Why does my EZGO golf cart hesitate?
The main reason why an EZGO Gas golf cart hesitates while accelerating, is because of a dirty carburetor. A dirty carburetor causes this hesitation. Regular cleaning can prevent this problem. Check the rubber boot and clean if you spot any dirt. In case it has worn out too much, you can replace the carburetor.
How to check for leaks in golf cart?
You can check for any leaks by following these steps: Crank up the golf cart and check every seal for leakage. You can also spray wd40 at the clutch to find leaks. When the cart becomes hot, the voltage also drops. So, make sure you provide enough voltage to the batteries so the cart can run.
Why is my EZGO RXV hesitation?
In most cases, the hesitation problem occurs due to bad batteries. If you have bought new batteries for your EZGO RXV, make sure to fully charge them before the first use. Batteries should then be charged after every use. To keep the batteries in check, get a Digital MultiMeter to measure the individual voltage.
Why does my golf cart stall?
The most common reason why your golf cart is stalling is due to a bad solenoid or a faulty speed controller. Batteries have lost charge. Faulty ignition. Problem with the direction switch. Faulty speed controller. Bad solenoid. The solenoid wears out every time the gas pedal is pressed down. The solenoid gets pressed down to a thin plate.
Why does my cart stutter?
If you change the battery, change the charger as well; otherwise, the battery will keep running down. If your cart seems to run fine for a few feet, and then it stutters, it is most likely the batteries. If it is not the battery, then check if it is the speed controller or the resistor.
What causes a cart to heat up?
Weak batteries. Bad connection between the batteries. If there are loose connections, it will cause heating in the battery. To check, you can drive your cart for a while and feel the temperature in the cables and connections. If there is no heating, then check the individual voltages.
Why do electric golf carts fail?
These carts can start to show signs of wear and may fail just like any other vehicle over time.
What are the problems with electric golf carts?
These carts can start to show signs of wear and may fail just like any other vehicle over time. Learn about some of the more common issues associated with electric golf carts. 1. Solenoid Wear. The solenoid is the primary electrical switch in your golf cart and is designed to ensure the current from the battery flows into the motor. ...
What is the controller on a golf cart?
An electric golf carts' controller is known as the heart of the operation and closely resembles and operates much like the motherboard in a computer. So a problem with the controller will have rippling effects throughout the cart. A common function of the speed controller is to control the speed of the golf cart.
Why does my gas cart not work?
When you press down on the gas pedal and hear a tapping-like sound, this is the sound of the solenoid activating. When there is a disruption in the flow of the electrical current , your cart will not operate. A common reason for current disruption is solenoid wear.
What happens if your cart doesn't move?
If the cart doesn't move in either direction, both switches have failed. Diagnosing a problem with the direction switches isn't a complicated matter, but repairing the switch is more complex, especially if the switches are built into the speed controller.
How does a solenoid work?
Each time the solenoid activates as you press down on the gas pedal, the solenoid compounds down onto a thin metal contact plate. Over time, the force of this pressure creates tiny electric arcs on the plates' surface. These arcs eventually create a resistance that prevents the current from properly flowing.
Why won't my sped controller accelerate?
Problems with the sped controller occur for a variety of reasons, but most often the cause is degradation due to age or lack of use.
Why does my golf cart keep powering off?
If the cart starts powering off after a new installation, then you will know that the issue is caused due to errors with the installation.
What happens if you charge your golf cart?
You would have charged up your cart fully but after driving it around for an hour or two, the power would have got drained off completely. If this is a frequent occurrence with your cart, then you will need to take a look at the batteries.
How to check battery water level in golf cart?
How to Check Battery Water Levels in a Golf Cart. Check if the voltages in both the batteries are at the designated levels. Also, if the water in the batteries has dried up, it could cause this issue. Check for the electrolyte and water levels in the batteries. Make sure that you are not overcharging or undercharging your batteries as these could ...
Why does my cart have a loose solenoid?
If the connections from the solenoid have become loose or if there is some other loose contact, the cart might behave in this manner. It can also be caused by a faulty motor or a faulty key switch.
Why does my golf cart cut out?
Another reason why golf carts can cut out is due to problems with the battery voltage or water levels.
Can you fix a golf cart on your own?
Under NO circumstances should you attempt to fix your golf cart on your own. Doing so is dangerous and could result in serious bodily harm. The information on this website has not been verified for accuracy and should only be used for general information purposes only. Use this information at your own risk.
Is my speed sensor broken?
There is a magnet associated with the speed sensor. Sometimes your speed magnet may be broken but will still be clinging on; only being held by the screw. Unfortunately, you may not realize it is broken until you take the mechanism apart. The speed sensor may not even show any issues. Check if the magnet is broken and if it is, ...