When a golf shaft is flighted, it means that the longer irons will have an easier time popping the ball a little higher. That is because the longer irons have a lower “kick point,” which helps get the ball a little higher. Comparatively, the shorter irons have a higher kick point, keeping the ball slightly lower than usual.
Full Answer
What is a flighted shaft in golf?
Flighted shafts are designed to give the ball a consistent apex point across all irons. That means that a 5-iron and a 9-iron will create a shot with similar ball heights and trajectories. What Does it Mean if a Golf Shaft is Flighted?
What does “flighted” mean in golf irons?
It also means that the irons’ weight changes based on the distance they are capable of providing. Longer irons are heavier, whereas shorter irons are lighter. Pro golfers and low handicappers can be biased towards flighted shafts because they can give players a little more control.
What do the letters on golf shafts mean?
Those letters tell golfers flex—the relative stiffness—of that shaft. "L" is the most flexible shaft and "X" is the stiffest shaft: "A" or "M" denotes "senior flex" (might also be designated "AM" or "A/M," or "Senior")
What do shaft flex codes mean on golf clubs?
Those letters tell golfers flex—the relative stiffness—of that shaft. What Shaft Flex Codes Mean "L" is the most flexible shaft and "X" is the stiffest shaft: "L" denotes "ladies flex"
What is flighted golf shafts?
What Does it Mean if a Golf Shaft is Flighted? When a golf shaft is flighted, it means that the longer irons will have an easier time popping the ball a little higher. That is because the longer irons have a lower “kick point,” which helps get the ball a little higher.
What does non flighted shaft mean?
Jess. The "flighted" shafts will have a lower ball flight in the shorter irons, and a higher ball flight in the long irons. Non-flighted shafts are all standard ball flight. Most better golfers prefer the added control of the flighted shafts in their scoring clubs (8-9-PW).
What do numbers on shaft mean?
These numbers are the weight of the shaft in grams. Shaft weights typically range between 50 grams and 85 grams with the 50-60 numbers being pretty common as seen in the example shafts above.
What does 5.5 mean in shaft flex?
StiffRegular – 5.0. Regular Plus – 5.5. Stiff – 6.0. Extra Stiff – 6.5. Extra Stiff Plus – 7.0.
What is a rifle golf shaft?
Rifle Steel Shafts Frequency Matching of each shaft perfectly matches the flex throughout a set of clubs using electronic calibration. Flexes in Rifle shafts can also be more exactly tailored for the average golfer as they use decimals to meaure stiffness (eg 5.0, 5.5, 6.0, etc).
How do you read a shaft?
5:0230:01Golf Club Fitting - Understanding Golf Shaft Stiffness - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe amount of Bend is read from the chart behind the shaft and the number is assigned to a stiffnessMoreThe amount of Bend is read from the chart behind the shaft and the number is assigned to a stiffness or more commonly a letter L a RS or X what one decides each of these letters mean is arbitrary.
How do you read a golf shaft?
Normal measurements are in the 2- to 6-degree range. A low torque number means less twisting of the shaft but also can mean a harsher feel. A high torque number is associated with a soft-feeling shaft, although there may be a sacrifice in accuracy. FLEX: The strength of a shaft as it bends during the swing.
How do you know what shaft stiffness to use?
The higher the speed, the stiffer the shaft. Steel shafts, which are heavier than graphite, are stiff and less forgiving than graphite. According to Golf.com, graphite shafts are lighter and can help increase swing speed. Selecting the right flex for your shaft is key to good ball striking.
Is 6.5 stiff or extra stiff?
Have you ever wondered what the number designation on your Project X shaft means? You know, the 5.0, 6.0, 6.5 and so on printed on the shaft. These numbers correspond with flexes from “regular” to “extra stiff plus”.
Is a 6.0 flex shaft stiff?
5.0 out of 5 stars 6.0 62g is VERY stiff! Great shaft! The only thing I would say to someone who is looking at this is if you normally play a stiff shaft you should go with the 5.5 62g variant. the 6.0 62g shaft is extra stiff in my opinion.
What shaft is best for my swing speed?
– Golf Shaft Flex ChartCarry DistanceSwing SpeedFlexUnder 200 yardsUnder 75 mphLadies or Senior200 to 240 yards75 to 95 mphRegular240 to 275 yards95 to 110 mphStiffOver 275 yardsOver 110 mphStiff or Extra StiffOct 15, 2019
Why do you use flight in golf?
Benefit of Using Flights in a Golf Tournament. The primary benefit of flighting is that it allows more golfers to compete for gross championships. If you flight golfers by skill level, then the golfers within each flight have a better chance of competing against each other based on gross score. A 15-handicapper will never win a tournament ...
What is a championship flight?
The Championship Flight is for the best golfers (at or close to scratch); the First Flight for the next-best group, and so on. The number of flights required depends on the number of golfers in the field; the more golfers, the more flights, because a wider range of handicaps will be present. One possible method of flighting a tournament based on ...
What is a flighted tournament?
(Ordinal names—first, second, third—are most common). When a tournament uses flights, it is called a flighted tournament, or said to be "flighted by handicap," "flighted by age," etc.
Can a 15 handicapper win a tournament?
A 15- handicapper will never win a tournament that includes scratch golfers. But a 15-handicapper who is playing in, for example, a 10-15-handicap flight does have a chance to win that flight. Many tournament organizers that use flights not only crown gross champions within each flight, but also an overall net score winner.
Who decides whether to use flights?
The Committee or tournament organizers (the people who are in charge, in other words) are responsible for deciding whether to use flights and, if so, how those flights will work. That means deciding on the criteria for the flights (handicap, age or some other factor) and what range of such criteria makes up each flight within the tournament.
Is a 10-25 handicap too large?
A flight that encompasses golfers with handicaps from 10-25 is too large a range, for example: Any 25-handicapper in the flight has no chance of winning (at gross) against a 10-handicapper. Organizers have to keep that in mind when deciding how to build their tournament flights. We've seen tournaments that go to an 11th or 12th flight or even more.
Why do golf clubs have shafts?
During the golf swing the shaft causes deflection (bend) that causes the clubhead to be in a forward and toe downward position relative to the grip of the club.
What to know about golf shafts?
In today’s guide we will review everything you need to know about golf shafts. Picking out the proper golf shaft is very important as it will impact several components of your golf swing. For example, picking the wrong golf shaft flex can cause you to hook or slice the golf ball. It also can hinder the total distance the ball flies by having too much spin or too low of launch. But don’t worry, at the end of reading today’s guide you’ll be much more educated on the buying process and how to pick out the right golf shaft. Lets Get Started!
How to determine golf shaft flex?
Start by using a launch monitor to analyze your golf swing speed. If your swing ranges between 85 mph and 95 mph then you should start with a regular flex. If your swing speed is faster than 95 mph, then you should try a stiff shaft.
What is the best shaft for golf?
Steel – A steel golf shaft is usually stronger and more durable (less likely to snap) than a graphite shaft. It’s also less expensive and sometimes stainless steel is used in the creation of the steel shaft. There is also two variations, stepped steel and rifle steel.
Why does my golf shaft have a slice?
When the golf shaft is too stiff, it doesn’t unload properly at impact. This can lead to the face staying open and result in a slice golf shot. Beware, a slice isn’t always an indication the shaft is too stiff so if you already have a slice, it could be caused by another fault in your golf swing.
What shafts do golfers use?
For most golfers, a graphite shaft works great. Most iron sets are made with graphite shafts as well so you get that material type by default usually unless you specifically seek out steel shafted irons. With steel shafts, you may find that golf shots are easier to control.
What is the most common shaft material used in golf clubs?
Graphite Shafts. Graphite – this type of shaft is usually lighter weight compared to a steel shaft but it’s less durable and more expensive to make. Graphite is one of the most common shaft types used in golf clubs and can arguably be considered the main shaft material used, beating out steel.
What is a BGF shaft?
The BGF Fitting System has a one-to-one relationship between Trajectory and Spin. This means that a shaft that has a Low Trajectory designation will also have a Low Spin designation. And a shaft that is Mid-High Trajectory will also have Mid-High Spin. So when selecting shafts in a fitting, our fitters choose a shaft category based upon the BGF Fitting Recommendations in the appropriate category.
How many categories of shafts are there?
Shafts are typically identified by launch or trajectory characteristics in five categories: Low, Low-Mid, Mid, Mid-High and High. The same categories apply to the spin characteristics.
How many degrees does a low trajectory shaft launch?
In a typical driver fitting, for example, a Low trajectory shaft may produce a 9 degree launch while a Mid-High trajectory shaft may only increase the launch to 11 degrees, and spin may only increase from 2,500 to 2,900.
What is the difference between a low trajectory shaft and a mid high shaft?
In a typical driver fitting, for example, a Low trajectory shaft may produce a 9 degree launch while a Mid-High trajectory shaft may only increase the launch to 11 degrees , and spin may only increase from 2,500 to 2,900.
How many categories of shafts are there?
Shafts are typically identified by launch or trajectory characteristics in five categories: Low, Low-Mid, Mid, Mid-High and High. The same categories apply to the spin characteristics.
Why do golf shafts bend?
Shaft makers vary the amount of stiffness because golfers have different types of swings—different swing speeds, different tempos—and different amounts of stiffness in a shaft better match up to those different swings.
What happens if you mismatch your golf shaft?
If your swing is mismatched to your golf shaft flex—if you are using an X flex shaft, for example, when you should be using an R flex shaft—you will have a harder time squaring the clubface at impact. The way your shots are flying can clue you into the possibility you might be using the wrong flex.
What does it mean when a golfer's swing is slower?
The slower a golfer's swing, generally speaking, the more flex he or she requires in the shafts that are in their golf clubs. And the faster the swing, the more stiffness. Tempo also matters: A jerkier swing requires more stiffness, a smoother swing less stiffness, generally speaking.
How to choose shaft flex?
These are just general guidelines, however; the best way to choose shaft flex is to go through a club fitting. Not every golfer can (or is willing) to do that, though.
When were steel shafts invented?
Alas, no. Golf industry veteran Tom Wishon, of Tom Wishon Golf Technologies, explains: "Shortly after steel shafts were introduced in the 1920s, steel shaft makers discovered they could change the diameter and wall thickness of the tubes to create shafts with different amounts of stiffness to better match to the different swing speeds ...
Feedback
I agree with previous posts that the best option would be to visit a Certified Rifle and get fitted. If you don´t have that chance and like the DG Regular I think that you should go for a 4.5 since 5.0 is more of a firm (between regular and stiff) flex.
Feedback
What about hitting the ball "in the screws"? If I hit a TMSpeed Blade 6-iron with Project X 5.5 my strikes are 4 lines up with 1/8" to 1/4" in variation toward toe and heel. But if I hit a Callaway Diablo Forged 6-iron with Uniflex shaft my strikes have a wider dispersion, e.g., 1/4" to 3/8" toward heel and toe.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Sony Open Pics from January 11, 2022 Part 1
I was able to get out to the Sony Open today to take a few pics. I guess due to Covid precautions they kept the spectators pretty far from the players. Also due to camera...
Where is the ferrule on a golf club?
FERRULE: The ferrule is an oval piece, commonly made of plastic, that is located just above the neck of the clubhead. Modern ferrules not only are decorative, they are made with great precision to provide accurate and secure bonding between the shaft and clubhead. BUTT: The top end of the shaft, called the butt, is located underneath the grip.
What is the tip of a golf club called?
TIPPING: The tip end of the shaft, which is inserted into the clubhead, sometimes is cut or trimmed to provide more stiffness in the shaft. This is called tipping. While the practice is common on professional tours, it is not widely used among amateur golfers.
How much does a true temper iron shaft weigh?
True Temper’s Dynamic Gold, the most popular steel iron shaft on the PGA Tour, weighs abourt 130 grams. At the other end of the spectrum, Mitsubishi Rayon has a Bassara graphite driver shaft that weighs about 35 grams. RAW: A raw shaft is an uncut shaft that has not been installed in a clubhead.
What is a raw shaft?
RAW: A raw shaft is an uncut shaft that has not been installed in a clubhead. BLANK: This is another word for a raw shaft. When clubmakers refer to a blank, they mean a raw shaft. SPINE ALIGNMENT: Golf shafts, because they are round and hollow, have a spine that is a result of the manufacturing process.
What does low torque mean on a golf swing?
Normal measurements are in the 2- to 6-degree range. A low torque number means less twisting of the shaft but also can mean a harsher feel . A high torque number is associated with a soft-feeling shaft, although there may be a sacrifice in accuracy. FLEX: The strength of a shaft as it bends during the swing.
What is torque in swing?
TORQUE: A measurement of the circular rotation of the shaft during the swing.
What is the kick point of a golf shaft?
KICK POINT: Modern shafts, particularly graphite shafts, can produce kick in different sections of the shaft — high kick, mid kick and low kick being three obvious points of reference. Fitters often spend considerable time matching a golfer’s swing with a particular kick.
