Golf Club Length 101: Chart to Determine Your Ideal Length
| Club Type | Avg. Length | Club Type | Avg. Length |
| Driver | 45” | Sand Wedge | 46” |
| Putter | 44” | Gap Wedge | 45.5” |
| 1 Iron | 39.5” | 3 Wood | 43” |
| 2 Iron | 39” | 4 Wood | 42.5” |
Are all single length golf clubs the same length?
As the name suggests, a set of single-length iron and hybrid clubs will all be the same length. It's most common for them to all be the length of a 7-iron (around 36.75"-37.5" depending on the set).
What is the ideal length of a golf club?
Golf Club Length 101: Chart to Determine Your Ideal Length Club Type Avg. Length Club Type Avg. Length 2 Iron 39” 4 Wood 42.5” 3 Iron 38.5” 5 Wood 42” 4 Iron 38” 7 Wood 41” 5 Iron 37.5” 8 Wood 40.5” 7 more rows ...
How are golf clubs measured?
The first one is your height. Manufacturers usually make clubs to account for golfers anywhere between 4’8” to 6’7” inches tall. The second measurement is wrist-to-floor distance. This is done by standing on a flat surface with your arms relaxed and pointing down.
What was the first single-length set of golf clubs?
An antecedent can be found in a set of irons Bobby Jones designed for Spalding, in which every two clubs were the same length (3- and 4-iron were the same length, 5- and 6-iron, and so on). Probably the first true, mass-produced single-length set was the Tommy Armour EQL irons set released in 1988.
What is the benefit of one length irons?
One-length irons allow you to stand to the ball in the same way regardless of the iron you're using, in theory helping with consistency of strike and club speed. Essentially you can swing the same way regardless of what club you have in your hand.
Do single length clubs work?
The reality is that mid-high handicap players don't strike their 4 and 5-irons out of the middle on a regular basis. That's where the single-length irons can really help. We've found that the strike with the single length irons in the 5 and 4-iron is much more consistent than with variable length irons.
Are one length clubs good for beginners?
Single-length iron sets could be a good option for beginners and high handicappers. This group would only have to use one iron setup, which could accelerate learning. And they'd likely struggle less with longer-than-standard scoring clubs than with standard-length long irons.
Are one length golf irons good?
Lower numbered irons should be easier to hit and control with a shorter shaft than the traditional length. Higher numbered irons and wedges should fly further with longer shafts. In theory, single-length irons should assist golfers with consistency from each swing.
Do you need to be fitted for one length irons?
In short, even though the lengths of each iron will be the same, what that length should be as well as each one of the other key fitting specifications should be custom fit and custom built for each golfer.
How do you hit single-length irons?
Bryson DeChambeau's 3 tips to hitting single-length ironsAdjust your ball position. If you've looked into one-length irons, you've probably heard that the higher-lofted clubs go higher than their variable-length equivalents, and the lower-lofted clubs go lower. ... Embrace the versatility. ... Accept the learning curve.
Do one length irons reduce distance?
Luckily swinging with a one-length iron set should not make you lose distance. You may see a few yards difference with your long irons, but your short irons will likely end up going a few yards further. Sometimes the longer length on the short irons gives them a bit more distance, but it won't be significant.
Did Bobby Jones use single-length irons?
As mentioned above, legendary golfer Bobby Jones was arguably the most influential figure to play using single-length irons. Bobby Jones famously won two major championships in 1930 with single-length irons, the US Open and the Open Championship.
Do shorter golfers need shorter clubs?
Shorter golfers are often better served with shorter clubs, while the lie angle (how the club sits on the ground) may also need tweaking. If your clubs are too long and/or upright, you'll be forced to adjust away from a swing that's natural for you.
How should my golf clubs fit my height?
Using the ratio of every 6" of height there should be a 1" change in length then there should be a 1 ½" difference between their 5-irons. For example, recommend 36.5" for the lady and 38" for the man (or 36.75" / 38.25").
What length club do I need?
1. Measure Your Overall Height (i.e. “static” fitting)OVERALL HEIGHTGOLF CLUB LENGTH ADJUSTMENTS5'4″ to 5'7″minus 1/4″5'7″ to 6'1″standard length in inches6'1″ to 6'2″plus 1/4″6'2″ to 6'4″plus 1/2″7 more rows
Are DeChambeau's clubs the same length?
That's right. DeChambeau plays all of his irons -- all of which have unique names -- with the same 37.5-inch shaft and has been doing it since 2011, when he made the switch -- from 3-iron to 60-degree wedge -- with coach Mike Schy.
What are the drawbacks of single length golf clubs?
The biggest drawback of single-length golf clubs is you'll probably lose some distance with your lowest lofted clubs. Manufacturers and club fitters can work wonders to make appropriately gapped single-length club sets, but you'll always have more distance with a longer club (assuming all else is equal).
Why use single length irons?
Because the ball position and club length are the same, you can use the same swing for every single-length iron, improving consistency and repeatability . Another positive of single-length irons and hybrids is ...
What is the difference between a 5 iron and a 6 iron?
A 5-iron, which has less loft than a 6-iron, will be slightly longer than the 6-iron. A 6 iron is longer than a 7-iron, and so forth. As the name suggests, a set of single-length iron and hybrid clubs will all be ...
Who makes the Cobra golf clubs?
If you're in the market for single-length golf clubs, you'll find that only a small number of manufacturers are producing them. Cobra, Bryson DeChambeau's sponsor and club maker, are by far the most noteworthy manufacturer in the space. Beyond Cobra, you'll have to look at more boutique brands like Sterling Irons.
Can you use one length irons in golf?
If your time is limited, one length irons may be perfect for you. No matter what iron you're practicing with in your little time to golf, you'll be grooving your swing with all the irons in your bag.
Do single length irons work?
One "con" that should be obvious is that single-length irons will take some getting used to if you've previously played with traditional-length golf clubs. For this same reason, we'd take reviews of one length clubs with a grain of salt from people who only used them for a day after using variable-length clubs their entire lives.
Is a 6 iron the same as a 7 iron?
A 6 iron is longer than a 7-iron, and so forth. As the name suggests, a set of single-length iron and hybrid clubs will all be the same length. It's most common for them to all be the length of a 7-iron (around 36.75"-37.5" depending on the set). Since the length of all single-length irons and hybrids are the same, ...
What is the difference between lie angles and clubheads?
The clubheads are all identical weights; the lie angles are all identical and about 10-degrees more upright than typical . The point, DeChambeau says, is to "create a swing that's consistent from club to club, that doesn't have a lot of moving parts to mess up.". And it works for him.
When were single length irons invented?
The idea for single-length irons goes back at least to the 1930s, probably much earlier. An antecedent can be found in a set of irons Bobby Jones designed for Spalding, in which every two clubs were the same length (3- and 4-iron were the same length, 5- and 6-iron, and so on). Probably the first true, mass-produced single-length set was ...
What is a 5-iron set?
In a traditional iron set - what some have started referring to as "variable-length irons" - each iron in the set is a different length. The irons get shorter as the number gets higher. A 5-iron is shorter than a 4-iron; a 6-iron is shorter than a 5-iron; and so on.
Who is the only golfer to win the NCAA Championship?
And it works for him. In 2015, DeChambeau joined Jack Nicklaus, Phil Mickelson, Tiger Woods, and Ryan Moore as the only golfers to win the NCAA Championship and U.S. Amateur Championship in the same year. In 2016, DeChambeau won his first pro tournament, the Web.com Tour 's DAP Championship. And in 2017, DeChambeau became ...
Is single length iron new?
Single-Length Irons Are Not New. There are new technologies in golf all the time, but there aren't a lot of new ideas. So it's not unusual for old ideas to get recycled, expanded upon, tweaked, improved on, especially once the technology catches up to the idea. The idea for single-length irons goes back at least to the 1930s, probably much earlier.
Do you have to move the golf ball forward or back?
No need to move the golf ball forward or back in your stance depending on the club used; no resetting to adjust to a club's length; no swinging more or less upright, no more one-plane or two-plane to adjust to club length. This is the major selling point and should benefit golfers of all skill levels.
Do lower numbered irons fly lower?
The lower-numbered irons in a same-length set tend to fly a little lower than traditional irons. Not getting enough height on shots is already a problem for most recreational golfers. There might be a sacrifice in distance with the lower-numbered irons.
What is the purpose of every club in a set?
Every club in the set fits property which allow you to make a fluid, power swing. It just makes sense that in order for you to maximize your golfing potential, all of the irons within your set should have the same fitting and dynamic attributes as your favorite iron (same length, weight, flex, etc.).
How many different swings can you learn with a club?
With a conventional set of clubs, you must learn and master 12 different swings using 12 different postures, swing planes, and ball positions. This means a lot of practice and it’s likely you’re going to have trouble making this work for you consistently.
Why is one plane swing better?
The one plane swing produces a dramatic increase in ball striking consistency because there are fewer moving parts. Add a set of clubs that have the same length, weight, flex, etc., and you’ve got a powerful match.
What are 1 irons made of?
Because the 1 Irons are made with a harder-type cast steel (17-4 stainless), you won’t have to worry as much about the loft and lie angles drifting over time. Left Handed Clubs. If you are a left-handed golfer, fortunately they are available for you. Customer Service. It is excellent.
Do new golf clubs come on the market every year?
Every year new golf clubs come on the market and each manufacturer raves about all the new specs and improvements that lead you to believe that new club is the one that will finally improve your rounds. Problem with that theory is that every year supposedly brings a better club.
How does a lengthened golf club work?
A longer distance can be achieved with a lengthened club if you have the ability to swing it with the same force and speed that you did with a shorter club . This increases the ball’s velocity upon impact, and you can hit it farther. Flex: The flex of the shaft will be altered. This happens for a few reasons.
What happens if you play too long in a golf club?
If the club is too long for you, then you’re spending extra time during ramp up which is the amount of time spent during your initial downswing. You want a balance between your abilities, ramp up, and momentum while cutting through the wind with as little resistance as possible.
Why are golf clubs made the way they are?
The reason clubs are made the way they are is to gather momentum as you swing down. If your club is too short, you’re going to build momentum while having resistance, meaning you will push too hard against the wind and not just swing naturally. There’s not enough weight to the club.
What happens if your woods aren't longer?
If your woods didn’t have the length that they do, and they were shorter, you’d be sending your ball almost straight up and they wouldn’t close much of a distance. It’s not always about the angling of the golf club head; sometimes it’s about the length and force to make it meet the ball.
Why do you have to swoop on your golf club?
Because the club is longer, you have to swoop on your downward swing, causing the force of your wood – if you’ve hit it correctly – to be applied to the bottom of the ball and send it upwards. A wood without enough length just doesn’t cut it. You’d be sending the ball higher but with almost no distance.
When shortening a golf club, do you have to remove the crown?
When you shorten a golf club, you have to remove the crown, and safely disconnect the shaft from the head.
Why did Lars start golfing?
Father of six and long-time golfer, Lars started golfing because of a summer job when he was nineteen, where he caddied for a Virginia state official. From that moment on, he fell in love with the sport, and made it a core staple in his life. Thirty-five years later, with thousands of games under his belt, he’s here to teach you the fundamentals and master techniques of golf, while recommending proper golfing gear and equipment for every step in your journey.
What are the different lengths of golf irons?
A standard set of golf irons has clubs of all different lengths. The shorter irons are the wedges, nine iron, and 8 iron. Then you have mid-length irons and then finally long irons like the five, four, and three iron. As you move up in the set, the irons get quite a bit longer. The problem that this has caused for golfers is ...
What is a one length iron?
The One Length iron concept is a reasonably new idea in the world of golf. One-length irons have become very popular very quickly. Some golfers will try and have golf clubs cut to length and adjusted to make them a one length set. The technology behind the one length irons is unique and exciting.
How tall should a golf iron be?
Golfers that choose one length irons should make sure that they are in the recommended height range for this club. If you are taller than 6’0 and shorter than 5’6″ you should look at a custom fitting for the one length. Within this range, then you should be fine to stick with the standard one length golf clubs.
Why do golfers put long irons in the bag?
For most amateur golfers, the long irons sit in the bag because they are afraid to use them. If that describes you, then distance should not be a concern when switching to the one length irons.
What is the most popular iron in golf?
Some sets are made with all clubs the same length as the eight or six iron, but the seven ir on is the most popular. You will still need to make sure you get your clubs fitted adequately for you; in fact, it is more important with the one length than with variable length.
Can you cut irons to be the same length?
This is not very easy to do. When you try and cut your irons all to be the same length, you are going to throw off the lie angles, and the lofts could be off as well. The best way to get a set of one length irons is to order them directly from a manufacturer.
Is it good to have one length irons?
The one-length iron sets are not for every player. These clubs take a bit of getting used to, but then once you do, your game should become quite a bit more dependent and reliable. Golf is a complicated game with many moving parts; anytime you can decrease the complexity of the sport, it is positive.
How tall is a golf club?
Manufacturers usually make clubs to account for golfers anywhere between 4’8” to 6’7” inches tall. The second measurement is wrist-to-floor distance. This is done by standing on a flat surface with your arms relaxed and pointing down. You then measure the distance between the ground and the line where your wrist meets your hand.
What factors affect the size of a golf club?
Here’s another factor that affects the appropriate golf club size. The angle and the grip size of the club are as important as the height and wrist-to-floor measurements . However, this means more to serious professional golfers than to someone just starting out.
Why do manufacturers make golf tables?
Manufacturers create such tables to help everyone from beginner golfers to pro golfers choose the right club size for their play. Here’s how your size affects the dimensions of your needed golf club size and why it matters. Last but not least, the grip size should also be determined for the club to fit perfectly in your hands.
What is the difference between men's and women's golf clubs?
The difference between men’s and women’s clubs is generally noticeable on the grip. Men’s golf clubs have larger grips and are also about 2.5 cm longer than women’s golf clubs. Kids’ clubs are even smaller than women’s for the most part. Knowing what type of golf club you need is the first step in determining the appropriate size.
What is plus and minus golf clubs?
The adjustments on a size chart are made with reference to the standard clubs. Therefore, the plus and minus values show how much shorter or longer your golf club should be compared to the standard, according to your measurements, ...
What is the second measurement of a grip?
The second measurement is the length of your middle finger from the tip to its base. When you have these two measurements, you can then find the appropriate grip size on a manufacturer’s size chart. Note that we only use the middle finger as an example as it applies to most people.
Can you play golf with an off size club?
Because there are plenty of variations, it’s unsurprising that a lot of people sometimes play with off-size clubs. Most pros recommend that even beginners should opt for a perfectly sized golf club in order to have the best learning experience.
What brand of irons are single length?
Soon after turning pro he signed a deal with Cobra prompting them to release their own single length irons in the form of the F7 and Forged One models. Cobra then introduced the F8 One and are also offering hybrids and wedges in single length too. Wishon are the third brand to offer single length with their Sterling irons.
Who used single length irons?
It may seem like something new and a bit funky to some but Bobby Jones, the greatest amateur player of all time, used single length irons. Most people just accept that variable length irons are the norm as that is what they have always used and that is all they are likely to see when they walk into the pro shop.
Single-Length vs Traditional Variable-Length Irons: Basic Differences of Clubs
- In a traditional set of irons (now sometimes called "variable-length irons"), shaft lengths increase as golf clubs' loftdecreases. A 5-iron, which has less loft than a 6-iron, will be slightly longer thanthe 6-iron. A 6 iron is longer than a 7-iron, and so forth. As the name suggests, a set of single-length iron and hybrid clubs will all be the sam...
Cons of Single-Length Irons
- While single-length golf clubs can make it easier to improve your consistency, they can also have some drawbacks. Before diving into the cons, we want to warn you: Though we've listed a higher number of potential cons for single-length irons than pros, we think the significance of the pros will outweigh the cons for many golfers.
Who Should Play Single-Length Irons?
- Everyone is different, so it's impossible for us to say with 100% certainty if single-length golf clubs will be right for you. With that in mind, here are some categories of golfers who could benefit from single length irons and hybrids over variable-length clubs: 1. New Golfers - Beginners to the game of golf are perhaps the most ideal candidates for single-length iron sets. Focusing only on one s…