What does it mean to pure your irons?
SST Pure recommends 'puring' the shaft and orienting it into the club head with the hard side or stiffest side toward the target; that will cut down on the total amount of variation.”Mar 24, 2020
What is club champion Puring?
0:052:04Club Champion - SST Puring - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo what happens is it tries to bend around it and so it'll actually throw the club head in or out ofMoreSo what happens is it tries to bend around it and so it'll actually throw the club head in or out of plane. That you're trying to get back to square at impact.
What is prepping a golf shaft?
Shafts: Lightly sand shaft from tape to tip with 150 grit or finer sand paper to remove the polyurethane finish and all the paint. This operation is "prepping" the shaft and can be done by The GolfWorks (PREP).
What does tipping a golf shaft mean?
Shaft tipping is when a club builder removes length from the tip section of a shaft, which is the end where the clubhead is installed. In most cases, tip trimming a shaft makes it meaningfully stiffer. It also increases torsional stiffness, known as “torque,” which is a shaft's resistance to twisting.
What is SST shaft pure alignment?
SST PURE is a patented process of shaft alignment that analyzes a golf shaft to find its most stable orientation. Using proprietary computer software and sensitive data-acquisition sensors, the SST PURE Shaft Alignment System quickly locates the “neutral” plane in each shaft.
What golf shaft flex should I use?
– Golf Shaft Flex ChartCarry DistanceSwing SpeedFlexUnder 200 yardsUnder 75 mphLadies or Senior200 to 240 yards75 to 95 mphRegular240 to 275 yards95 to 110 mphStiffOver 275 yardsOver 110 mphStiff or Extra StiffOct 15, 2019
How do you tip a golf shaft?
5:0012:20Installing a Shaft Adapter - YouTubeYouTubeStart of suggested clipEnd of suggested clipOnce you do have your ferrule in place you think it is in place the easiest way is to take anythingMoreOnce you do have your ferrule in place you think it is in place the easiest way is to take anything like a screwdriver something like that drive it down into the adapter.
How do you tip a driver shaft?
1:0911:44The Purpose of Shaft Tipping - YouTubeYouTubeStart of suggested clipEnd of suggested clipSection we take away. The more we get into the more we expose this wider. Section from from here onMoreSection we take away. The more we get into the more we expose this wider. Section from from here on up. So we we take the soft part away we leave the stiffer part which is up in this butt. Section.
What is tip and butt prepping?
Tip & Butt Trimming - $4.95 Shafts are tip trimmed (if required) to manufacturer's recommendations. For steel shafts, we abrade the tips. For graphite shafts, we remove the polyurethane coating. After tip trimming and prepping, the shafts are butt trimmed to the desired final playing length*.
What does torque mean on a golf club shaft?
a twisting force thatTorque is defined as “a twisting force that tends to cause rotation.” In the case of a golf shaft, it's the amount of twisting (or lack thereof) that occurs during the swing.Jun 5, 2020
What shaft torque do I need?
So for most golfers, as long the torque of a graphite shaft is between 3.5 and 5.5 degrees - which is the case for the vast majority of graphite shafts today - the golfer will be OK and torque will never be a factor to worry about in the shaft fitting.Apr 17, 2018
What happens if golf shaft is too stiff?
If your driver's shaft is too stiff, the clubhead may not square with the ball at the point of impact, causing slices and fades. If you can't feel the weight of the clubhead loading through the shaft, it's probably too stiff, and can cause errors and issues associated with accuracy such as these.Aug 31, 2021
What is a pured shaft?
To have a shaft that’s “pured” is just another way of saying that the shaft has gone through an SST Pure analysis to ensure it’s in the most beneficial orientation for consistent performance when attached to a club head.
What does "pure" mean in golf?
We take a look at what it means to “pure” a golf shaft, or to have a set that’s “pured.”. Due to manufacturing tolerances, not all golf shafts are perfectly round or symmetrical. Any small imperfections — whether its wall thickness, roundness or otherwise — can cause variations in how one shaft performs versus another within the same model family.
How does pureing help in golf?
PUREing not only helped players land their shots nearer the centerline, it also helped them to shrink their dispersion. The average distance between players’ furthest right and furthest left shots was 2.1 yards smaller with the PUREd iron versus the non-PUREd iron.
Is a golf shaft straight?
Start by understanding that, to varying degrees, golf shafts aren’t perfectly straight or perfectly round. These irregularities can cause problems when the shaft twists and bends during the swing. SST PURE Shaft Alignment finds the most stable bending plane or “Neutral-Axis” of the shaft.
What Is Pureing A Golf Shaft - Is It Worth It Or Just A ..
This means that a pured golf shaft can potentially go one club further than the club you are currently using. When you look at it that way, this is quite a significant difference. Of course, there is always a downside to these great revelations in the golf world, pureing a golf shaft does come at a cost. More ›
Does PUREing a Shaft Improve Performance? - Golf Myths ..
It may be hard to believe, but there's something that hundreds of PGA Tour players have done that a relatively small number of golfers even know about - PUREing their shafts. SST PURE has been on the PGA Tour for over 15 years, and players using th is technology have won over $1.5 billion. More ›
What does it mean to "pure" a golf shaft? - Gear 101
Puring a shaft usually costs between $30 and $40, depending on location. Is getting your shaft "pured" actually worth it, though? We'll tackle that question in a follow-up story. Stay tuned.
Shaft Pureing - Club Fitting - Team Titleist
For those that believe in purring their shafts, it elevates their confidence in their equipment. There is no harm in trying it. If you trust the advice of your pro then you should try it.
Results of a shaft puring - are they good? - Clubs, Grips ..
Moreover, if you've only had one club pured (and not the whole set) it's not really going to match anything and is basically a waste of money. A better bet would be to have your set built by a club maker who can align your set using FLO (flat line oscillation) and frequency checking techniques. More ›
What is SST PUREing? Tour club builder Scott E.G. explains
If a $300 shaft needs to be pured, its not worth buying and cheap $10 shafts that come from "off the shelf" sets arent worth the extra cost. Better to buy a shaft thats made properly without a seam. eg Nunchuk More ›
Testing the Performance of Drivers with Pured Shafts ..
This varied from player to player, but the consensus was they could feel a difference in the way the pured shafts felt to them, even though the statistical data did not show an overwhelming performance benefit. The players that could feel a difference commented that the club felt more stable and uniform during the swing. More ›
What Is Pureing A Golf Shaft - Is It Worth It Or Just A ..
Pureing a golf shaft is when a golf shaft is taken out of the golf club, analyzed, and then placed back in at a strategic angle. Many golf clubs, when they come from a manufacturer, could have small imperfections in the shaft. This is not usually an issue, but for some players, it can be.
Does PUREing a Shaft Improve Performance? - Golf Myths ..
SST PURE Shaft Alignment finds the most stable bending plane or "Neutral-Axis" of the shaft. SST claims that when the club head is installed in the proper orientation with the "Neutral Axis," golfers will see improved consistency. SST PUREing is NOT the same as "spining" or "FLOing."
Does Pureing A Shaft Improve Club Performance? New ..
The test concluded that "PUREing" a shaft led to significant distance increases. On average, our testers gained over 7 yards of total distance with the PUREd six-iron compared to the non-PUREd club. That is nearly a full club of extra distance despite the fact that both clubs had the same loft!
Golf shafts: To pure or not to pure? - Morning Read
Weiss, who pured the world's first golf shaft, deserves the last word here. "SST PURE works with golfers of all abilities," he concludes, "and our list and success of Tour players who have had their clubs pured speaks for itself.
Shaft PUREing - Golf Club Building, Fitting, Repair
Golf shaft PUREing is a technical process, which is one of several mechanical approaches to improving shaft performance. Hundreds of PGA Tour players have their shafts pured. And, PUREing is done to both graphite and steel shafts. The process involves identification of the most stable bending plane or "neutral-axis" of the golf shaft.
Testing the Performance of Drivers with Pured Shafts ..
The result of the puring process, in theory, is that players of all skill levels hit the ball longer, straighter and more uniformly consistent. Miles of Golf has been asking the major club manufactures for years if a pured shaft outperforms a non-pured shaft.
Is "Pureing the shaft" a scam? - WRX Club Techs - GolfWRX
100 legit....but it works best if you keep your clubs in a dedicated area.