“R” denotes “ regular flex ” “S” denotes “stiff flex” (might also be designated “Firm”) “X” denotes “extra stiff flex” (might also be designated “Tour”) What does R mean on a golf club? A regular (R) shaft is favored by golfers who have a medium-fast swing and drive the ball between 225-250 on a regular basis.
What does the R stand for on a golf shaft?
For those of you who are unaware of the nomenclature, R stands for Regular and is designed for – well, you guessed it – the regular guy. It is simply the flex built into the shaft to complement the strength of what the average male golfer may produce to provide the right feel and consistent results.
What do the numbers on golf clubs mean?
Now that you are more familiar with the types of golf clubs, what about the golf club numbers? Golf club numbers refer to the loft, which is the angle of the golf club face. When you adjust the loft, you are changing the height and distance the golf ball will travel when struck.
What do the letters on golf shafts mean?
Those letters tell golfers flex—the relative stiffness—of that shaft. "L" is the most flexible shaft and "X" is the stiffest shaft: "A" or "M" denotes "senior flex" (might also be designated "AM" or "A/M," or "Senior")
What do the a and M stand for in golf shafts?
"A" originally stood for "amateur." The "M" stands for "mature" or "medium." Also, of course, "S" is taken by "stiff." Some golf shafts bend more than others, depending on how much stiffness is built into the shaft when it is manufactured.
What does R mean on club?
For those of you who are unaware of the nomenclature, R stands for Regular and is designed for – well, you guessed it – the regular guy.
Is the S on a shaft senior or stiff?
The typical range of shaft flexes available on the market range as follows: TX (most stiff), X (extra stiff), S (stiff), R (regular), A (senior) and L (ladies, least stiff). Some companies use different denominations such as numbers or colors to denote flex, but golfers are most familiar with the letters listed above.
What does r s mean on a golf shaft?
The basics of shaft flex The SR (Senior) and R (Regular) flexes are geared for slower swing speeds and golfers who need help getting the ball airborne. As your game improves and you start to generate more speed, you'll likely find yourself in an S (Stiff) or XS (Extra Stiff) flex.
What is a 5r Golf Club?
Taylor Made R5 XL irons are cavity-back, game-improvement clubs aimed at the beginner and novice. Each club is marked with a deep cavity and wide sole, made to get shots airborne with ease. Made of stainless steel, R5 irons (5-iron through pitching wedge) are slightly offset with a teardrop shape.
What are the easiest irons to hit for seniors?
With combo sets, the longer clubs (4, 5, and 6) are more like hybrids than traditional irons. Then, the 7, 8, 9, and pitching wedge have a traditional iron look and feel of a standard iron. This makes long ones easier to hit (especially off the turf) and the shorter irons geared more toward performance.
What is flex S on a golf shaft?
A player with a very fast swing will require a shaft with less flex, while a player with a slower swing will need a shaft with greater flex. Flex is generally rated as Extra Stiff (XS), Stiff(S), Firm(F), Regular(R), Senior(S), Amateur(A) and Ladies(L).
What is R flex S Flex?
"R" denotes "regular flex" "S" denotes "stiff flex" (might also be designated "Firm") "X" denotes "extra stiff flex" (might also be designated "Tour")
What flex do I need for my driver?
– Golf Shaft Flex ChartCarry DistanceSwing SpeedFlexUnder 200 yardsUnder 75 mphLadies or Senior200 to 240 yards75 to 95 mphRegular240 to 275 yards95 to 110 mphStiffOver 275 yardsOver 110 mphStiff or Extra StiffOct 15, 2019
What does P mean on a golf club?
A driver, however, usually has a number such as 9.5 or 10.5 to indicate the loft of the club. Drivers are available in a variety of lofts. Wedges typically don't have numbers. Instead that have letters such as P or PW for pitching wedge and S for sand wedge.
How old are TaylorMade R7 irons?
TaylorMade R7 Irons Fast Facts: Launch date: November 01, 2008. Handicap range: Low, Mid, and High % Hands: Both. Set makeup: 3, 4, 5, 6, 7, 8, 9.
What flex should a beginner golfer have?
But if a beginner player already has a decent swing motion and generates clubhead speed between the range of 95 to 110 mph or more, then a stiff shaft or extra stiff shaft could be justified to be used by a beginner golfer.
What degree loft should my driver be?
The ideal driver loft depends on your swing speed and the attack angle. Average players that swing the club less than 95 MPH will likely find that a 10.5-degree driver performs the best. Better players who can control their drives and want the most distance will lean more towards a 9-degree driver.
Why would a clubmaker suggest S flex shafts?
Therefore the clubmaker or fitter would suggest S-flex shafts in the lighter weight pattern because the frequency and deflection reading matched that of the heavier weight R-flex shafts.
What is flex in golf shafts?
It is simply the flex built into the shaft to complement the strength of what the average male golfer may produce to provide the right feel and consistent results. Shaft manufacturers have their own internal method of determining flex and building that into the design of a raw, uncut shaft and then suggesting a systematic way ...
What shafts have the same weight?
If you have two R-flex shafts of the same weight and length, the one with the lower bend point shaft will often appear to be stiffer even though it may not feel that way when swung. The original Apollo Shadow R-flex steel shaft is a prime example. The weight is the same as a Dynamic Gold which has the stiffer tip section.
What is a mid bend shaft?
A shaft classified as “mid” bend point has the stiffness distribution more evenly spread along the length of the shaft. In order for a low bend point shaft to have more flex built into the tip means the shaft has a disproportionate amount of its stiffness in the butt end. In determining the flex of the shaft whether by deflection ...
How many flex ratings are there for golf clubs?
There are five flex ratings for golf clubs--extra stiff (X), stiff (S), regular (R), senior (A) and ladies (L). Generally, the faster your club speed, the stiffer the shaft, but use care when selecting a flex. If you are not certain or in between flexes, it is better to select a softer flex than a stiffer one.
What happens if your golf shaft is too stiff?
It is important to note that if you select a shaft that is too stiff, you will lose loft and control on your shots.
How does flex affect golf?
The flex in a golf shaft affects the distance, accuracy and trajectory of your golf shot. Because the shaft flexes during a swing, the position of the clubhead changes and it is important to select the proper flex in a club so that the clubface will be square on the ball when it makes contact.
What is stiff shaft?
Stiff Shaft. The stiff shaft is quite popular and should be chosen by those who consistently drive the ball 250 or more yards off the tee. This shaft generally appropriate for mid-low handicaps, but be sure to have your clubhead speed measured before choosing between a stiff and regular flex.
What is the softest flex for golf?
Women generally have the lowest club speed of all golfers and should select a ladies flex. This is the softest of all the flex ratings. If you consistently hit the ball less than 200 yards off the tee , this is an appropriate flex. Women who hit further may want to consider either senior or regular flex clubs.
What does the number mean on a golf club?
Golf club numbers refer to the loft, which is the angle of the golf club face. When you adjust the loft, you are changing the height and distance the golf ball will travel when struck. The lower the golf club number, the less loft, the less intense the angle on the golf club face; this means the golf ball will travel more distance at a lower height.
What are the different types of golf clubs?
The three common types of golf clubs are wood, iron and putter. You can find these types of golf clubs at our golf pro shop in South Florida.
What is a wood golf club?
Wood golf clubs are long-range clubs used at the beginning of every hole when you tee off. For longer courses, use wood golf clubs in the second swing. Woods have large, circular club heads with a flat front where you strike the golf ball.
Why are putters so easy to remember?
Putter Golf Clubs. Putters are easy to remember because they have short shafts and smaller club heads. You may recognize this club from the last time you played mini-golf, but, hopefully, your putter is much better than those!
Why are golf clubs stamped with a number?
Clubs are labeled clearly for identification. Most golf clubs are stamped with a number as a means of identification. Although experienced golfers are often able to differentiate between their clubs simply by viewing their size, shape and loft of their clubface, the number helps make this distinction certain.
What does 9.5 mean on a golf club?
A driver, however, usually has a number such as 9.5 or 10.5 to indicate the loft of the club. Drivers are available in a variety of lofts. Wedges typically don't have numbers. Instead that have letters such as P or PW ...
Why do golfers use clubhead covers?
Most golfers use clubhead covers to protect their driver and fairway woods from damage sustained in their golf bag. These covers are always marked with corresponding numbers so that even when a clubhead is covered, you can still identify the club with ease.
What are the numbers on golf clubs?
Numbers. The numbers stamped or marked on the heads of golf clubs relate to the club's loft. Fairway woods and irons are the clubs that are always stamped, although specialty clubs also carry some form of identification. A 4-iron, for example, has less loft than a 9-iron.
Where is the number on a fairway wood?
In most cases, the number displayed on a fairway wood or iron is always in the same place. On fairway woods, this number is often on the bottom of the club so that it's visible when the club is in your bag. Numbers stamped on irons are usually found on the bottom of the club for the same reason, but some manufacturers display this information on ...
Do sand wedges have numbers?
Wedges typically don' t have numbers. Instead that have letters such as P or PW for pitching wedge and S for sand wedge. The sand wedge, gap wedge and lob wedge might also be identified by the degrees of loft. The sand wedge, for example, might say "56" for 56 degrees of loft, rather and "S." Putters also are not marked with a number because ...
What are the names of old golf clubs?
Names of Old Golf Clubs. Golf clubs have changed quite a bit over the long history of the sport. There used to be clubs with names like mashie and niblick and jigger and spoon.
How many different types of golf clubs are there?
There are several different types of golf clubs in a typical golfer's bag. In fact, today, there are five categories of clubs: woods (including the driver), irons, hybrids, wedges and putters.
What is wedge golf?
The wedges are the highest-lofted golf clubs. They are used for shorter approach shots into greens, for chips and pitches around greens, and for playing out of sand bunkers.
What is putter used for?
Putters are used for, well, putting . They are the clubs golfers use on the putting greens, for the last strokes played on a golf hole - for knocking the ball into the hole. There are more varieties of putters on the market than any other club. That may be because choosing a putter is a very personal process.
What is a wood golf club?
The category of golf clubs called "woods" includes the driver and the fairway woods. (They are called woods even though their clubheads are no longer made of wood.) The woods are the clubs with the largest heads (typically hollow, extending a few inches from side-to-side and a few inches from front to back, with rounded lines) ...
What is a hybrid club?
Hybrids are numbered like irons are (e.g., 2-hybrid, 3-hybrid, etc.), and the number corresponds to the iron they replace.
Is there a right putter?
There is no "right" putter. There is simply the putter that is right for you. Putters generally come in three styles of clubhead, and three varieties of lengths. Clubheads: Clubheads can be a traditional blade; a heel-toe clubhead; or a mallet clubhead.