R = Regular— middle of the road shaft and most used. U = Uniflex— for golfers that swing the club at the high end of R and low end of S. S = Stiff— for use by golfers with high swing speed. X = Extra Stiff— for the young, strong golfer with very high swing speed.
What does the R stand for on a golf shaft?
May 28, 2019 · Speed/Carry Guidelines for Driver. If your driver swing speed is approximately 110 mph or higher, and your carry distance around 270 yards, go with X flex shafts. If your speed is 95 to 110 mph and your carry distance 240-270 yards, go with S flex. If your speed is 85 to 95 mph and your carry distance is 200 to 240 yards, go with R flex. If your speed is 75 to 85 mph …
What do the letters stand for in golf clubs?
Jan 30, 2020 · Before delving into golf club number meanings, remember to check out our blog for a beginner’s guide to golf and other articles to help you learn how to golf. Club Types – …
What does TS stand for in golf shafts?
For those new to golf, here is what the letters stand for in the order from the most flexible to the stiffest. The L stands for ladies, A for amateur or senior flex today, R is regular, S is stiff and …
What do the numbers on golf clubs mean?
Golf club numbers refer to the loft, which is the angle of the golf club face. When you adjust the loft, you are changing the height and distance the golf ball will travel when struck. The lower …
What does S stand for on a golf club?
What is an R flex shaft?
What does ping SR shaft mean?
How do I know what flex shaft to use?
- Take a look at the distance you hit your driver. ...
- If you have a very smooth swing, you might benefit from a softer flex even if you swing fast. ...
- If your drives go left, you might benefit from a stiffer flex; if your drives go right, you might benefit from a softer flex.
What is Fujikura R2 Flex?
How far should you hit a 7 iron?
What does senior flex mean?
How do I know if I need a senior flex shaft?
Is senior flex good for beginners?
What happens if your golf shaft is too flexible?
What shaft flex should I use for irons?
| If You Can Hit 150 Yards with a... | Then Your Optimal Shaft Flex Is... |
|---|---|
| 6- or 7-Iron | Regular Flex (R) |
| 5-Iron/Hybrid or 4-Iron/Hybrid(Male or Female) | Senior Flex (A/M) |
| Any Iron/Hybrid lower than 4 or any Fairway Wood (Females or Juniors) | Ladies Flex (L) |
What flex should my irons be?
What does 9.5 mean on a golf club?
A driver, however, usually has a number such as 9.5 or 10.5 to indicate the loft of the club. Drivers are available in a variety of lofts. Wedges typically don’t have numbers. Instead that have letters such as P or PW ...
What is the golf club number?
Golf club numbers refer to the loft, which is the angle of the golf clubface. Adjust the loft and you change the height or distance the golf ball will travel when struck.
Why do golfers use clubhead covers?
Most golfers use clubhead covers to protect their driver and fairway woods from damage sustained in their golf bag. These covers are always marked with corresponding numbers so that even when a clubhead is covered, you can still identify the club with ease.
What are the best golf clubs for beginners?
As a guide for first-time golfers, a standard beginner golf club set would look like this: 1 Woods – 3 & 5 2 Irons – 3, 4, 5, 6, 7, 8, 9 and a pitching wedge 3 Putter – only 1 needed
What are the three types of golf clubs?
The three golf club types are wood, iron, and putter. Wood – These are the long-range clubs used at the beginning of every hole when you tee off.
What does higher loft mean in golf?
The higher the golf club number, the higher the loft, the more intense the angle on the golf club face; these means the golf ball will travel higher but for a shorter distance. If that all sounds like more science and physics than you wanted to learn today, we understand.
What club is used at the beginning of every hole?
Wood – These are the long-range clubs used at the beginning of every hole when you tee off. For longer courses, they are also used in the second swing. Woods have large, circular club heads with a flat front where the golf ball is struck.
What is the R3 in golf?
The R3 nomenclature was also derived from the Japanese manufactures and would be the modern day equivalent of L or ladies flex. The name R3 takes out the sex of the individual in the fitting equation and instead relates it the player’s swing speed much the same way that ladies grips are now referred to as undersized.
What does SR stand for in a flex shaft?
The SR actually stands for strong regular. Another way to put it, it is in-between a traditional R and S flex as a single or discrete flex. Unless you see characters like / or & in-between the S and X, then it is not a combination flex shaft like some of the FST steel iron shafts.
What are the different shaft flexes?
Shaftology 101 states there are 5 basic shaft flexes (L, A, R, S and X). For those new to golf, here is what the letters stand for in the order from the most flexible to the stiffest. The L stands for ladies, A for amateur or senior flex today, R is regular, S is stiff and finally X is extra stiff. These have pretty much stood the test of time since shafts first received flex designations, but that is not the case anymore. Here is a primer to get you up to speed with all the new designations you may encounter.
What is the difference between R2 and R3?
The R2 is the equivalent of the modern day A-flex. Instead of calling it amateur or senior flex which is ability or age related, the R2 is simply a softer shaft than a standard regular flex for those with reduced swing speeds. R3. The R3 nomenclature was also derived from the Japanese manufactures and would be the modern day equivalent ...
What is R3 Flex?
The R3 flex is the gender neutral term for those with the lowest swing speeds. SR. This flex designation can be confusing because some may look at the SR as being short for senior flex. Or others may think it could be a combination R and S flex model depending how it is cut. It is neither.
Is a double X stiff enough?
XX. The double X – yes, there is such a category for those with very high swing speeds in which standard X is just not stiff enough. XX may be equivalent or a cross-over to the TX designation.
What does the number mean on a golf club?
Golf club numbers refer to the loft, which is the angle of the golf club face. When you adjust the loft, you are changing the height and distance the golf ball will travel when struck. The lower the golf club number, the less loft, the less intense the angle on the golf club face; this means the golf ball will travel more distance at a lower height.
What are the different types of golf clubs?
The three common types of golf clubs are wood, iron and putter. You can find these types of golf clubs at our golf pro shop in South Florida.
What is a wood golf club?
Wood golf clubs are long-range clubs used at the beginning of every hole when you tee off. For longer courses, use wood golf clubs in the second swing. Woods have large, circular club heads with a flat front where you strike the golf ball.
What is the difference between a wood and an iron club?
The difference between a wood and iron club refers to the material the club is made out of. A 3-wood and 3-iron will have the same loft angle, as would a 5-iron and 5-wood, though made of different materials, which means they are better suited for different shots.
Why are putters so easy to remember?
Putter Golf Clubs. Putters are easy to remember because they have short shafts and smaller club heads. You may recognize this club from the last time you played mini-golf, but, hopefully, your putter is much better than those!
Is it hard to learn golf?
Golf can seem a little complicated to newcomers and first-timers, and understandably so. Learning to play golf can be difficult due to its steep learning curve, rules and regulations, and equipment specifications that accompany the game. A common question newcomers to the sport ask is the meaning behind the various golf club numbers. Thankfully, our South Florida golf course experts at Deer Creek Golf Club are here to share some insight into the golf club numbering system. We will break down what the numbers mean and which numbered club you should use for particular shots.
Why would a clubmaker suggest S flex shafts?
Therefore the clubmaker or fitter would suggest S-flex shafts in the lighter weight pattern because the frequency and deflection reading matched that of the heavier weight R-flex shafts.
What is flex in golf shafts?
It is simply the flex built into the shaft to complement the strength of what the average male golfer may produce to provide the right feel and consistent results. Shaft manufacturers have their own internal method of determining flex and building that into the design of a raw, uncut shaft and then suggesting a systematic way ...
What is a low bend point shaft?
A shaft classified as a “low” bend point (a shaft designed to hit the ball high) has more of the flex built into the shaft more toward the tip section or where it is attached to the head. Conversely, a shaft classified as a “high” bend point (a shaft designed to hit the ball lower) has less of the flex built into the shaft’s tip section. A shaft classified as “mid” bend point has the stiffness distribution more evenly spread along the length of the shaft.
What shafts have the same weight?
If you have two R-flex shafts of the same weight and length, the one with the lower bend point shaft will often appear to be stiffer even though it may not feel that way when swung. The original Apollo Shadow R-flex steel shaft is a prime example. The weight is the same as a Dynamic Gold which has the stiffer tip section.
What is a mid bend shaft?
A shaft classified as “mid” bend point has the stiffness distribution more evenly spread along the length of the shaft. In order for a low bend point shaft to have more flex built into the tip means the shaft has a disproportionate amount of its stiffness in the butt end. In determining the flex of the shaft whether by deflection ...
How many flex ratings are there for golf clubs?
There are five flex ratings for golf clubs--extra stiff (X), stiff (S), regular (R), senior (A) and ladies (L). Generally, the faster your club speed, the stiffer the shaft, but use care when selecting a flex. If you are not certain or in between flexes, it is better to select a softer flex than a stiffer one.
How many yards off the tee for stiff shaft golf?
The stiff shaft is quite popular and should be chosen by those who consistently drive the ball 250 or more yards off the tee.
What does flex mean in golf?
The flex in a golf shaft affects the distance, accuracy and trajectory of your golf shot.
What happens if your golf shaft is too stiff?
It is important to note that if you select a shaft that is too stiff, you will lose loft and control on your shots.
What is the softest flex for golf?
Women generally have the lowest club speed of all golfers and should select a ladies flex. This is the softest of all the flex ratings. If you consistently hit the ball less than 200 yards off the tee , this is an appropriate flex. Women who hit further may want to consider either senior or regular flex clubs.
What does the letter A mean in a golf summary?
If you see the letter “a” before a player’s name in a golf tournament summary -- also known as a box score -- it means the player is an amateur. Amateurs occasionally play in professional tournaments, but they do not receive prize money. In a match play summary, a line may read “Player A def.
What does PGA stand for in golf?
By M.L. Rose. PGA stands for "Professional Golfers' Association of America.". As with any large undertaking, the golfing world has developed its own language, including a variety of abbreviations and shorthand terms. Some are used for convenience in conversation, while others are mainly employed in print. Understanding these abbreviations can help ...
What is the USGA?
Organizations. Numerous golfing entities are known by their initials. Most notable in the United States is the USGA, which stands for United States Golf Association. The USGA generally regulates golf in the United States and Mexico, publishes the standard Rules of Golf, and runs the U.S. Open and a few other tournaments.
What does "out" mean in golf?
A golfer might say, for example, “he went out in 47 but came in at 39.” The word “out” refers to the front nine holes while “in ” refers to the back nine. In this example, therefore, the player shot 47 for the first nine holes but improved to 39 for holes 10 through 18.
How many holes does Player A lead in golf?
In this example, therefore, Player A has won the match by taking a three- hole lead after 16 holes of play.
Where does the word "golf" come from?
According to Snopes website, the word “golf” may derive from either the Dutch word “kolf,” a word used to describe a stick, club or mallet, or the Scottish verb “goulf,” meaning to “strike or cuff.”. Sorry, the video player failed to load. (Error Code: 100013)
What is the Ladies Professional Golf Association?
The Ladies Professional Golf Association is an organization made up of the LPGA Tour and club professionals. Another worldwide organizational abbreviation of note include the R&A (Royal and Ancient Golf Club, based in Scotland), the governing body of golf worldwide, except in the United States and Mexico.
What are the names of old golf clubs?
Names of Old Golf Clubs. Golf clubs have changed quite a bit over the long history of the sport. There used to be clubs with names like mashie and niblick and jigger and spoon.
How many different types of golf clubs are there?
There are several different types of golf clubs in a typical golfer's bag. In fact, today, there are five categories of clubs: woods (including the driver), irons, hybrids, wedges and putters.
What is wedge golf?
The wedges are the highest-lofted golf clubs. They are used for shorter approach shots into greens, for chips and pitches around greens, and for playing out of sand bunkers.
What is a clubhead in golf?
Clubheads: Clubheads can be a traditional blade; a heel-toe clubhead; or a mallet clubhead. A traditional blade is narrow and shallow, typically with the shaft entering at the heel (although sometimes center-shafted). Heel-toe putters have the same general shape as blades, but with extra weight at the heel and toe to add perimeter weighting, and with other design tricks to help make the clubs more "forgiving" on mishits. Mallet putters have large clubheads that maximize that forgiveness of poor contact. Mallets come in a variety of shapes and sizes, some very large and quite unusual.
What is a wood golf club?
The category of golf clubs called "woods" includes the driver and the fairway woods. (They are called woods even though their clubheads are no longer made of wood.) The woods are the clubs with the largest heads (typically hollow, extending a few inches from side-to-side and a few inches from front to back, with rounded lines) ...
What is a hybrid club?
Hybrids are numbered like irons are (e.g., 2-hybrid, 3-hybrid, etc.), and the number corresponds to the iron they replace.
