What are Ping golf shafts?
One product that Ping has been known for is their golf club shafts. Ping golf shafts are made for drivers and irons. Pings iron shafts are manufactured in either steel or graphite.
Is Ping G series SF TEC good for senior golfers?
Ping G Series SF Tec is a highly specialized driver, which senior golfers can make the most of. The club is known for its excellent use of weight-saving with the help of the Dragonfly technology.
What is Senior Flex on Ping golf clubs?
With a relatively low swing speed, the senior flex helps you square the clubhead at impact and generate more power. PING recommends its “soft regular” shaft flex for players who swing their drivers at 90 mph or less. PING manufactures a variety of clubs with soft regular shafts, including drivers, hybrids, irons and wedges. A Lack of Standards
What are the different shaft specifications of the Ping G10 line?
The G10 line has three different shaft specifications which are the Ping TFC 129i, Ping AWT, and Ping Z-Z65. Each of the three shafts have different specifications that can change the outcome of a golf swing.
What does SR flex mean on a golf club?
A senior flex golf shaft is a graphite shaft built to accommodate the needs of a slower swing. Players that use a senior flex golf shaft will typically have swing speeds below 85mph.
Who should use a senior flex shaft?
Senior flex shafts are appropriate for golfers who swing between 75 and 90 mph and carry a driver about 180 to 200 yards. Regular flex shafts are designed for golfers who swing 90 to 100 mph and carry a driver about 200 to 240 yards.
Is senior flex good for beginners?
Is senior flex good for beginners? Senior shaft flex is specifically made for all golfers with a slow swing speed. Now, these could be beginners and/or seniors or even women golfers. You can be a senior or older golfer getting back into the game after a long gap or someone wholly new to the game (old or young).
Does s flex mean stiff or senior?
stiff flex"A" or "M" denotes "senior flex" (might also be designated "AM" or "A/M," or "Senior") "R" denotes "regular flex" "S" denotes "stiff flex" (might also be designated "Firm") "X" denotes "extra stiff flex" (might also be designated "Tour")
What is SR shaft?
SR stands for Stiff / Regular, which is a very common flex for Japanese clubs. Great for players that are currently playing a Stiff flex and finding it slightly hard but have experienced difficulty with the Regular.
What is the difference between a senior shaft and a regular golf club?
When it comes to senior golf shafts, or if you see a golf shaft with a senior rating, it means that the shaft has been manufactured to a lesser stiffness than a regular golf shaft in order to accommodate the generally slower swing speeds of older players.
Will senior flex increase distance?
If you are playing with a regular shaft currently and it is not the right fit for you, the senior flex shaft could help you increase distance.
Which golf shaft flex is right for me?
If you're between 97 and 104 mph with the driver, you need a stiff flex. Regular – Now we are getting into the range where a majority of recreational golfers fall, and also where many LPGA pros fall. If you're between 84 and 96 mph, regular is going to be best for you.
Should senior golfers use graphite shafts?
Generally speaking, graphite shafts are better for seniors than steel shafts unless the senior still maintains very high swing speeds. There are some seniors in incredible shape that can easily hit a regular steel shaft in their iron. If this is you, by all means, keep swinging it!
What does S stand for on a golf club?
Drivers are available in a variety of lofts. Wedges typically don't have numbers. Instead that have letters such as P or PW for pitching wedge and S for sand wedge.
What loft driver should seniors use?
11 degreesWhat loft driver should seniors use? Most seniors should use a driver loft of at least 11 degrees. While some players might get away with 10 or 10.5 if they still have a higher swing speed, most golfers should between 11-13 degrees.
What golf clubs should seniors carry?
1 and 3 hybrids have replaced 2, 3, 4 and 5 irons in many senior's golf sets. Finally, in order to increase how high you can hit the ball on your drives, consider increasing the degrees of loft on your driver. Depending on your swing speed, you should be looking at a 12.5 to 15-degree loft on your club face.
Feedback
In the PING G410, the ALTA "SR" shaft is listed as a 56g "soft regular", while the standard "regular" shaft is 59g. I've hit the SR in the G410 and really liked it.
Feedback
SR is between stiff and regular. I have a Graphite Design Tour AD XC driver shaft in the SR flex. If you were to use a scale of 1 to 5, with 1 being a regular flex and 5 being a stiff flex, the SR would be a 3.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
What is a Ping G 5 hybrid?
Ping G 5 Hybrid 26 is an excellent golf club for senior golfers as it comes with countless incredible features. The inner sole of this specialized club is designed in a way that it launches the ball over longer distances than most typical hybrids. As the club makes an impact with the ball, it will rebound off the face of the club and fly away at incredible speed.
Why do senior golfers use sweet spots?
Furthermore, senior golfers can also utilize large sweet spots on their clubs to minimize the effect of mishits. As a result, they can hit the ball at greater distances with minimal effort. Ping is one of the few brands that caters to the essential needs of senior golfers so that they enjoy the game they love.
Why do seniors need a golf club?
Another essential feature for senior golfers is that they need a golf club to improve their slow swing speeds. This driver does that job, especially well with the help of Vortec Technology, which decreases friction with air at the end of a golfers swing.
What is the difference between a golf club and a neutral headset?
The white scoring lines and designated turbulators square off the face, whereas the neutral headsets up neatly at the end of the club.
What is Jack's goal in golf?
Jack loves golf. He's currently around a 10 handicapper. Jack's goal each time he hits the course is to shoot in the 70's. He began golfing as a child and played competitively through High School. After settling into the adult world, Jack once again began golfing with friends and family.
Can senior golfers use a turbulator?
As a result, senior golfers can directly benefit from a decreased spin, and they will be able to strike the ball more accurately. Furthermore, the club has an additional feature known as Turbulator Technology. Senior golfers can use this technology to alter the grooves of the club.
Where are the dots on ping irons?
PING irons, no matter their style, have small coloured dots on their hosels. These dots are located just above the logo on the back side of each club.
What does the dot on a golf club mean?
The dots symbolize the varying degree and type of lie angle of the club. The lie angle of a club is the angle between the shaft and the ground when the club is at normal playing position, with the centre of the sole touching the ground.
What is the lie angle of a golf club?
Ideally, you need a club with a lie angle that will have you hitting the ball squarely at impact. If the lie angle is too upright, you will tend to hit the ball to the left of your target. A lie angle that is too flat results in a shot that is off to the right of your target.
What shafts do golfers use?
For most golfers, a graphite shaft works great. Most iron sets are made with graphite shafts as well so you get that material type by default usually unless you specifically seek out steel shafted irons. With steel shafts, you may find that golf shots are easier to control.
What to know about golf shafts?
In today’s guide we will review everything you need to know about golf shafts. Picking out the proper golf shaft is very important as it will impact several components of your golf swing. For example, picking the wrong golf shaft flex can cause you to hook or slice the golf ball. It also can hinder the total distance the ball flies by having too much spin or too low of launch. But don’t worry, at the end of reading today’s guide you’ll be much more educated on the buying process and how to pick out the right golf shaft. Lets Get Started!
How to determine golf shaft flex?
Start by using a launch monitor to analyze your golf swing speed. If your swing ranges between 85 mph and 95 mph then you should start with a regular flex. If your swing speed is faster than 95 mph, then you should try a stiff shaft.
What is the best shaft for golf?
Steel – A steel golf shaft is usually stronger and more durable (less likely to snap) than a graphite shaft. It’s also less expensive and sometimes stainless steel is used in the creation of the steel shaft. There is also two variations, stepped steel and rifle steel.
Why does my golf shaft have a slice?
When the golf shaft is too stiff, it doesn’t unload properly at impact. This can lead to the face staying open and result in a slice golf shot. Beware, a slice isn’t always an indication the shaft is too stiff so if you already have a slice, it could be caused by another fault in your golf swing.
Why do golf clubs have shafts?
During the golf swing the shaft causes deflection (bend) that causes the clubhead to be in a forward and toe downward position relative to the grip of the club.
What is the most common shaft material used in golf clubs?
Graphite Shafts. Graphite – this type of shaft is usually lighter weight compared to a steel shaft but it’s less durable and more expensive to make. Graphite is one of the most common shaft types used in golf clubs and can arguably be considered the main shaft material used, beating out steel.
What is a ping iron shaft?
Ping Iron Shafts. Pings iron shafts are manufactured in either steel or graphite. Selecting the best shaft for your iron is crucial to getting the best contact and distance on a golf shot. Ping uses G10 technology to create their golf shafts.
What is ping golf?
Ping is one of golfs leading brands around the world. Ping produces golf products such as clubs, putters, gloves, and clothing accessories. One advantage of going with the Ping brand is that their equipment is customizable. Custom products create a wider array of available products for the golf consumer. One product that Ping has been known ...
What type of shaft does a Ping TFC 129i use?
The Ping TFC 129i uses a graphite shaft. The flex on the shafts are soft, regular and stiff. The torque on each shaft can either be 2.6 or 3.5 degrees. Weight on each shaft can be 70, 74, or 86 grams.
What is the degree of a Ping ATW iron shaft?
The flexes on the iron can be soft, regular, stiff, or X-stiff (a stronger version of stiff). The degree on the shafts are 2.0, 2.1, 1.6, or 1.5.
What is the shaft on a Pro Launch Red?
The Pro Launch Red driver shaft uses graphite material with a regular, stiff, or x-stiff flex. The degree on each shaft is 3 degrees. The weight on the shaft can be 60, 62, or 64 grams.
What is the flex of a Ping TFC 129?
The Ping TFC 129 driver shaft uses graphite material with a flex of soft, regular, stiff, or x-stiff. The degrees for a driver shaft are 5.5, 4.6, 4.1, and 3.7 degrees. The weight of the driver shaft can be 58, 60, 63, or 68 grams.
How far off the target line do golf clubs travel?
The general rule is for every degree your clubs are off in lie angle, it can cause your shots to travel four yards off your intended target line.
What is the standard length for a golfer?
Golfers between 5’7” and 6’0” fit into the standard length segment. Those shorter than 5’7” will be recommended shorter shaft lengths while those taller 6’0” will be recommended longer lengths.
What is a Spargo golf club fitter?
Whether that’s a softer, lighter shaft with a higher launch or a heavier, stiffer shaft with a lower trajectory, Spargo Golf, a PING Certified Club Fitter, can help you find the shaft that brings consistency to your game.
Where is Spargo Golf located?
Spargo Golf will Custom Order your set, and you will receive clubs directly from PING Golf located in Phoenix, Arizona. That's pretty nifty... Don't settle for what you can find in store's, order what you need from Spargo Golf. The Tour 65 shaft is available at an upcharge - default standard length is 45.25".
PING Repair Department
Fill out the form below and sign the release by checking the box and clicking SUBMIT.
Instructions
Complete the sections as completely as possible, making sure to include the serial number for every club. Some clubs within the same set may have different serial numbers. Please ensure that all the clubs in the box are listed on this form. Please note that ALL COMPONENTS AND PARTS are required for no-charge consideration.
Irons (s) to Repair
Check all that apply. If different work is needed on each club then check the boxes and describe the different club repairs in Additional Instructions. You may want to call us if the differences are complex.
Wedges (s) to Repair
Check all that apply. If different work is needed on each club then check the boxes and describe the different club repairs in Additional Instructions. You may want to call us if the differences are complex.
Driver (s) to Repair
Check all that apply. If different work is needed on each club then check the boxes and describe the different club repairs in Additional Instructions. You may want to call us if the differences are complex.
Fairway Wood (s) to Repair
Check all that apply. If different work is needed on each club then check the boxes and describe the different club repairs in Additional Instructions. You may want to call us if the differences are complex.
Putter (s) to Repair
Check all that apply. If different work is needed on each club then check the boxes and describe the different club repairs in Additional Instructions. You may want to call us if the differences are complex.
