
The green, or putting green, is the culmination of a golf hole, where the flagstick and hole are located. Getting the golf ball into the hole on the putting green is the object of the game of golf.
What does Green mean in golf?
Green: Green is the completion of a golf hole, at the spot of the location of the flagstick and the cup. Here, the golfer will putt out, culminating the end of the hole.
What is the difference between a putting green and a hole?
The green, or putting green, is the culmination of a golf hole, where the flagstick and hole are located. Getting the golf ball into the hole on the putting green is the object of the game of golf. Every hole on every golf course in existence ends at the putting green.
What is carry on a golf green?
Carpet – Another golf term for the grass on a putting green. Carry – This term refers to the distance the balls travels through the air. It is important when you need to get over obstacles or hazards. Cavity back – These irons are designed to be more forgiving than blades.
What are the rules of through the Green in golf?
Rules Of Golf: Through the Green. For example, if your ball lies in the rough just off the fairway, and you are taking relief from an immovable obstruction or an abnormal ground condition such as casual water, the relief procedure outlined in Rules 24-2b and 25-1b (through the green), advises that you must drop the ball “within one club-length...
See more

What are the greens in golf?
Greens, the most closely mowed areas of grass on the course, are where the hole is located and players putt. Greens can vary depending on the conditions of the course. For example, in hot, dry conditions, a green will play faster than usual and approach shots will be less likely to hold on the green.
What does hitting greens mean in golf?
In golf, a player hits a green in regulation when their golf ball hits and remains on the putting surface of a hole in as many or fewer than the number of shots prescribed by the par of a hole.
Why are greens called greens in golf?
And is it the “USGA Green Section” or the “USGA Greens Section?”Green is a noun and has two proper golf meanings. The first meaning is chiefly of Scottish origin. It simply defines all territory of a golf course, or all areas outside the confines of the clubhouse.
What is difference between fairway and green?
The area between the tee box and the putting green where the grass is cut even and short is called the fairway.
How many greens do pros hit?
If you've ever wondered “Who hits the most greens on tour” it's a great question. The list is constantly changing on a weekly basis, but the 2021 Tour average is 64%. That means that PGA Tour players average roughly 11 of 18 greens per round (the European Tour is about the same too).
How many greens should I be hitting?
So how many greens in regulation should amateurs strive to hit per round? Tina Tombs, a former LPGA pro and a GOLF Top 100 Teacher, said a high-handicapper should set a goal at seven greens in regulation, while a lower handicap should strive for 10 per round.
Why is a fairway called a fairway?
Believe it or not, the term “fairway” is actually not officially defined in the Rules of Golf handbook. The original term used by golfers was the “fair Green”. The actual word “fairway” did not start being used until the 1800s. Before lawnmowers, groundskeepers had no way to create the smoother playing area.
What is a double green?
A "double green" is a very large green that serves two different holes on the golf course. Double greens have two holes and two flagsticks, and are large enough to accommodate two different groups of golfers playing the green simultaneously (each playing their own hole, of course).
Why are top dress greens?
Topdressing improves putting greens smoothness, increases firmness and dilutes thatch. Thatch is a layer of dead and living plant material just below the turf surface.
What are the 5 parts of a golf club?
The components of a golf club include a shaft, ferrule, grip, hosel and clubhead.
What is the water on a golf course called?
The USGA defines "casual water" or "temporary water" as "any temporary accumulation of water on the course that is not in a water hazard and is visible before or after the player takes his or her stance.” In other words, "casual water" is water on the golf course that isn't meant to be there by design.
What are 5 parts of a golf course?
To play with the right club, you have to have a better understanding of the hole you are playing, especially its parts. Each hole in a course has 5 major parts namely Tee, Fairway, Green, Rough and Hazards. Understanding these parts allow you to plan your shots right.
What does "greens in regulation" mean?
What Does Greens in Regulation Mean in Golf? Hitting in a green in regulation is defined as hitting a par 3 in 1 shot, a par 4 in 2 shots and a par 5 in 3 shots. Greens in regulation will typically be counted as a number such as 11 out of 18. The best golfers hit on average 12 greens in regulation. In our post on how to become a scratch golfer, I ...
How many drivers do you need to hit a green in a golf game?
If you are playing from the trees all day, you will struggle to hit greens in regulation. Most golfers will hit between 12 and 14 drivers per round. Of those 12 to 14 greens, you want to be able to have a full swing with no tree restrictions or bunker barriers on at least 90% of your swings.
What are the most important stats in golf?
One of the most important stats in all of golf is how many greens a golfer can hit in regulation. I believe the two most important stats to lower your handicap, your scores and to get close to scratch are Greens In Regulation (GIR) and Scrambling around the greens.
What does "scramble" mean in golf?
This often means hitting a chip shot on the green and one putting. These two numbers when combined as a strength can lead to some low scores. Let’s look at a potential round of golf.
Why is knowing your distances important in golf?
Knowing your distances in golf is essential to take your game to the next level. Of course there are variables such as the wind, uphill or downhill and the lie you are faced with. Overall, the key is to know what you carry a stock shot with each club in your bag and have a chart.
How many bunkers are there in a green?
Most greens will have at least one bunker or some sort of barrier short or long. The key is to select the right club and right shot for the situation that you are faced with. If there is a bunker short, make sure you take enough club to carry it.
What is green in regulation?
Green in Regulation – Occurs when the golf ball is on the green and the player is putting for a birdie or better. Green Fee – The cost of playing a round of golf at a certain golf course. Grip – There are a number of different grips golfers use to hold the club.
What is the name of the cup on the green?
Plugged Lie – Occurs when a golf ball sinks into the ground and it is submerged. Easily occurs in wet conditions. Pot – Another name for the cup on the green. Press – Occurs when a second bet is brought up by a golfer during a round, and usually used to hedge their first bet.
What is a baseball grip?
Baseball Grip – A type of grip that resembles a baseball bat grip. Others might call it a 10-finger grip. Below the Hole – A term that refers to a putt where the hole is at a higher elevation than the ball. Big Dog – A Driver. Bite – A term used by golfers for a golf ball to stop rolling.
Why is backspin important in golf?
It is important for distance and accuracy. Backspin – Spin is very important in most aspects golf and you will often come across the term when comparing clubs or in golfing instructions. Simply put, more backspin will give you a high ball with a fair amount of control.
What is an ace in golf?
Ace – Otherwise known as a hole in one an ace is when the ball finds the hole from the tee in a single stoke. It is the dream of many golfers.
What is a local rule in golf?
Local Rule – Specific rule or rules that are not mainstream and only for that particular golf course. Long – A term for a golfer who hits the ball far (Dustin Johnson). Long Game – Refers to hitting long irons, woods, hybrids, and driver. Lob Wedge – A type of wedge that is usually in the 60 to 64-degree range.
What is the back nine of a golf course?
Back Nine – This refers to the last 9 holes of a typical 18 hole course, also known as heading in. Backswing – As the term suggests, this is simply the action taking when swinging back before striking the golf ball. It is important for distance and accuracy.
What does it mean when a golf ball goes through the green?
After all, "through the green" makes it sound like a golf ball has gone over the putting green. "That ball just ran through the green," a golfer might say, referring to such a result.
What does "through the green" mean?
Through the Green (Definition of the Golf Term) "Through the green" is — make that was — a term used in The Official Rules of Golf that applied to all parts of the golf course once you subtracted tees, greens and hazards. The term was dropped from the rule book beginning in 2019, but because it was used by golfers and rules officials for decades, ...
How far can you see the break of a green?
You can often see the contour of the green as you’re approaching it from a distance of 100 yards and in.
Is pace important on the PGA Tour?
Getting your pace right is very important and also can prove to be a bit difficult. Watching the pros on the PGA Tour. It’s amazing when you think that from week to week they’re playing on entirely different golf courses. The speeds of the greens can and will be very subtly different from course to course. The PGA Tour Stars seem to adjust to this with relative ease.
What is putting green?
Putting greens are comprised of living plants that change and perform differently from season to season and even day to day. Temperatures, humidity, rainfall and routine maintenance practices all influence daily green speed. Maintaining the same green speed throughout the year is impossible, and letting a target number dictate management practices is a recipe for damaged greens and undesirable playing conditions.
What is the most important thing to know about green speed measurements?
One of the most important things to know about green speed measurements is that they should not be used to compare one golf course with another. A green speed that is perfect for one course could be way too fast for a course down the road that has steeper green contours or golfers with different skill levels. There are simply too many variables involved to make reasonable comparisons.
What are the best ways to maintain fast greens?
While golfers hear a lot of discussion about courses with fast greens, they don’t hear as much about all that goes into providing those conditions. Lower mowing heights, regular topdressing, verticutting and hand watering are just some of the practices involved in maintaining faster greens. In addition, courses that maintain faster greens typically invest heavily in improving putting green growing environments by removing trees and enhancing drainage. The investments required on a daily and yearly basis to deliver faster green speeds are substantial, and beyond the budget of most golf courses.
How does a golf green aerify?
To aerify a golf green a piece of machinery built for the task cores the ground (punches holes and removes the dirt) in a certain pattern. (The small cores of dirt that are removed are called "plugs.") Air and water are thus infused into the ground at root level, and space opened up for new root growth. The holes left behind are filled ...
Where is the ball placed on the putting green?
The most to-the-point part of that local rule is this: "On the putting green, a ball that comes to rest in or on an aeration hole may be placed at the nearest spot not nearer the hole that avoids the situation.". Because such a local rule would be of limited duration, it would not be printed on the scorecard.
What is aeration in golf?
Think of golf course aeration as preventive maintenance: It's the (typically) annual process of punching little holes into greens (and sometimes fairways) that opens up growing room for grass roots and helps keep the turfgrass healthy. (It's also called "aerification.")
What is topdressing in golf?
The holes left behind are filled with sand in a process called "topdressing.". Once topdressed, a course is said to have "sanded greens.". The greens are left alone for a few days (although golfers may still play them) and the grass allowed to grow. The topdressing gradually disappears as watering takes place.
Why do golf courses need aeration?
The bottom line on why golf courses go through the process of aerified greens is that over time it keeps the greens healthier. This is the case because: 1 Aeration loosens soil that has been compacted by golfers walking over it and machines rolling over it. 2 This opens up growing room for the roots and increases oxygen to the roots. 3 The roots of the turfgrass thus can grow deeper, creating a healthier putting surface.

Official Definition of 'Putting Green' in The Rules
Defining Some Specific Types of Greens
- Double Greens A "double green" is a very large green that serves two different holes on the golf course. Double greens have two holes and two flagsticks, and are large enough to accommodate two different groups of golfers playing the green simultaneously (each playing their own hole, of course). Double greens occasionally show up on parkland-style ...
Putting Green Maintenance and Green Speeds
- We'll first offer another definition of a green-specific term, "double-cut greens." A "double cut" green is one that has been mowed twice in the same day, usually back-to-back in the morning (although a superintendent may choose to mow once in the morning and once in the late afternoon or evening). The second mowing is usually in a direction perpendicular to the first mo…