
Basically all the reed switch does is keeps the cart from running while the battery charger is plugged in.
What is the purpose of the reed switch on a cart?
The charger socket on the cart has a reed switch inside of it. Could anybody tell me the purpose of the reed switch for this particular application or the general purpose of a reed switch. Yours truly, Beardog Basically all the reed switch does is keeps the cart from running while the battery charger is plugged in.
How do golf carts work?
For example, if you park the cart to hit your next fairway shot and forget to set the parking brake, the cart will start to roll away. Once a specified rpm is reached, the cart uses the controller to cause the motor to slow the vehicle down to a very slow speed.
What is a regenerative braking switch on a golf cart?
This switch is only installed into golf carts with a separately excited motor which produces regenerative braking. They are not used in traditional golf carts with a series wound motor.
What is a tow run switch on a golf cart?
The tow run switch, also sometimes called a tow maintenance switch, is present in many brands and models of modern golf carts. This switch is only installed into golf carts with a separately excited motor which produces regenerative braking. They are not used in traditional golf carts with a series wound motor.

How do you bypass a micro switch on a golf cart?
You can bypass the reed switch in an EZGO golf cart by connecting the red wire of the reed switch to the white wire from the charger receptacles and to the red wire from the FRN micro switch.
Why does my ezgo golf cart not move?
The main reason why a EZGO gas golf cart will not go forward is because of a locked up brake, or a faulty solenoid and accelerator. A defective Run/Tow or Forward/Reverse switch can also cause a EZGO to not move forward.
How do you test a golf cart switch?
Testing a Club Car Ignition SwitchFind the back and red wires on the back of your battery pack.Connect the black wire to the negative terminal and the red to the positive.Keep the cart turned off while you work on it.Check the wires with a probe meter while the cart is off – only one wire should have a charge.More items...
Where is the reset button on an ezgo golf cart?
Locate the motor Remove the panel so the electric motor is visible. Electric motors usually include reset buttons that can perform similar to circuit breakers. Look in the area where several electrical wires enter the motor and locate a small red button. This is the reset button.
How do I bypass the reed switch on my EZGO?
0:221:131995 36V EZGO Golf Cart Reed switch bypass - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo some form said that the reed valve can be bypassed and that seems to be a pretty common issue.MoreSo some form said that the reed valve can be bypassed and that seems to be a pretty common issue. And here's the charger here and the front I've already taken off the panel and loosened it.
Why won't my EZGO golf cart go forward or reverse?
For example, if your run/tow switch has malfunctioned, your cart won't go forward or backward. This switch is designed to change your cart's operating mode from normal operation to increased power for towing. Check the switch to make sure that it isn't “stuck” between the two modes.
How can you tell if the ignition switch is bad?
Keep reading to see all of the common signs of a faulty ignition switch.Car Won't Start. If you turn your key and the car attempts to start, but fails, then you might have a broken ignition switch. ... Key Won't Turn. ... Car Stalls. ... No Noise From The Starter. ... Dashboard Lights Flicker.
How do you fix a golf cart that won't move?
When the cart won't move, you have to be sure that the batteries are sending sufficient power to the circuit. You must check the fuse. Use the voltmeter to check the voltage at the key switch. In a cart with batteries rated at 48V, it must show 48V at the key switch.
What causes a golf cart not to start?
As the main source of power to your electric golf cart, the batteries are commonly the cause for why your electric golf cart won't start. Acid-based batteries are typically used for electric golf carts and must be recharged in order to work properly.
What would cause an electric golf cart not to move?
Solenoid Wear When there is a disruption in the flow of the electrical current, your cart will not operate. A common reason for current disruption is solenoid wear. Each time the solenoid activates as you press down on the gas pedal, the solenoid compounds down onto a thin metal contact plate.
Do all golf cart motors have a reset button?
Electric golf cart motors have a reset button on their chassis which is designed to put your motor back into its original factory state. While it doesn't repair damage that may have occurred to the motor over the years, obviously, it does help to overturn any changes to the operation which may have occurred.
Where is the reset button on golf cart motor?
First, you'll want to reset your motor. It should have a small reset button (Usually it will be red) located near the main battery supply. Hit the reset button and then put the cover back on the motor. The next step would be to recharge your cart and try turning it on again. If it starts up then you're in luck!