Getting a golf shaft tipped is when the shaft is cut back (tipped) from the clubhead end, shortening the club and making the tip of the shaft stiffer. If you tip it from the clubhead end, the club will maintain the same length with a stiffer shaft at the bottom of the club near the ball.
What does tip thickness mean on a golf club shaft?
The shaft's tip diameter influences its torque and flexibility. Determining the tip thickness of a golf club shaft is important when installing a new shaft in a clubhead. Knowing the tip thickness will determine whether or not the shaft will fit appropriately into the hosel of the clubhead.
What is tip trimming on a golf shaft?
Shaft tipping is when a club builder removes length from the tip section of a shaft, which is the end where the clubhead is installed. In most cases, tip trimming a shaft makes it meaningfully stiffer. It also increases torsional stiffness, known as “torque,” which is a shaft’s resistance to twisting.
What is shaft tipping and how does it work?
Shaft tipping is when a club builder removes length from the tip section of a shaft, which is the end where the clubhead is installed. In most cases, tip trimming a shaft makes it meaningfully stiffer.
What does “tipping” mean in golf?
“Tipping” or “tip trimming,” as it’s sometimes called, means trimming a club shaft from the clubhead end, not from the grip end where it’s most often cut. Irons
What does it mean when a shaft is tipped?
Shaft tipping is when a club builder removes length from the tip section of a shaft, which is the end where the clubhead is installed. In most cases, tip trimming a shaft makes it meaningfully stiffer. It also increases torsional stiffness, known as “torque,” which is a shaft's resistance to twisting.
What happens when you tip a golf shaft?
What Is Tipping A Golf Shaft? Getting a golf shaft tipped is when the shaft is cut back (tipped) from the clubhead end, shortening the club and making the tip of the shaft stiffer. If you tip it from the clubhead end, the club will maintain the same length with a stiffer shaft at the bottom of the club near the ball.
What is tip size in golf shaft?
The shaft tip size is the the diameter of the tip portion of the shaft. For irons, this will usually be 0.370" (parallel) or 0.355" (tapered). For woods, it will be either 0.335" or 0.350". To choose the tip size needed, you'll want to match it with the ID (inside diameter) of the hosel of the golf club head.
What does tip flex mean in a golf shaft?
Tip Flex: Tip Flex, or Retro Flex, represents the average stiffness toward the head side of the shaft. Sometimes this is measured in a very similar fashion as the static-flex measurement. The difference being that the tip end is clamped and the load is applied to the butt end of the shaft.
What does a soft tip shaft do?
Well a shaft that has a soft tip has a low bend point and this helps lift the ball in the air by adding dynamic loft. Players who hit the ball too high should look for a tip stiff shaft which does not add so much loft, which produces a lower and more penetrating trajectory.
Should I tip my 3 wood shaft?
We generally do not recommend tip trimming on a driver or 3 wood shaft based on the shaft composition and how tipping could affect performance. We recommend that you consult your custom fitter or club-builder for the best tip trimming suggestions based on your individual swing and desired results.
How do you measure a shaft tip?
Measure your shaft tip using a golf shaft identification gauge by placing the shaft tip into the hole that fits most snugly and reading the number that is by that hole. The tip thickness range is from . 270 to . 370 inch.
What tip size are Taylormade irons?
True Temper Dynamic Gold VSSFlexWeightTip SizeX106g.355S104g.355R102g.355
What is the difference between parallel and taper tip shafts?
The difference between a parallel tip shaft and a taper tip shaft is the tip diameter and shaft weight. All golf shafts taper from the butt to the tip, but parallel tips stop tapering below the last step, while the taper tips, continues to narrow.
What does 5.0 shaft flex mean?
You know, the 5.0, 6.0, 6.5 and so on printed on the shaft. These numbers correspond with flexes from “regular” to “extra stiff plus”.
Which golf shaft flex is right for me?
If you're between 97 and 104 mph with the driver, you need a stiff flex. Regular – Now we are getting into the range where a majority of recreational golfers fall, and also where many LPGA pros fall. If you're between 84 and 96 mph, regular is going to be best for you.
What flex shaft do I need for irons?
Should You Use Regular or Stiff Flex Shafts?6-iron Carry Distance6-iron Swing SpeedShaft flex (all clubs)< 130 yards60 – 70 mphSenior Flex131 – 155 yards71 – 80 mphRegular Flex156 – 175 yards81 – 90 mphStiff Flex> 176 yards91 + mphX-Stiff FlexApr 13, 2021
What does it mean when a golf shaft is tipped?
Getting a golf shaft tipped is when the shaft is cut back (tipped) from the clubhead end, shortening the club and making the tip of the shaft stiffer. If you tip it from the clubhead end, the club will maintain the same length with a stiffer shaft at the bottom of the club near the ball.
Why do you tip a golf shaft?
Tipping a golf shaft allows players to have more control over their club. It allows players to feel the proper flex and help control their ball flight trajectory. Making the shaft stiffer helps lower torque and lessens a golfers chances of twisting the club at impact which usually results in bad shots.
How many inches does Tiger Woods cut his driver shaft?
Tiger Woods cut his driver shaft to 42.5 inches at one point in his career when using a True Temper X-100 steel shaft. About 90 percent of all fairway woods are trimmed on the PGA Tour. Woods are commonly tipped three to four inches.
What happens if you cut a golf club from the butt?
If you cut a club from the butt end then you will make the club shorter and stiffer. If you cut too much length off and shorten the club too much, you will have it stiffer but you might lose distance as well.
What are the myths about the shaft?
The Myths. Myth #1 – Tipping a shaft changes the feel. Myth #2 – Tipping a shaft will reduce spin. Myth #3 – Tipping a shaft will reduce launch angle. Myth #4 – Tipping a shaft will improve accuracy.
Does tipping a golf shaft help with accuracy?
Conclusion. If you want a shaft to feel stiffer, tipping it will get results. However, tipping (just like playing a stiffer shaft) is no guarantee of lower spin, lower launch, or greater accuracy. If you’re interested in maximizing your distance off the tee and hitting more fairways, the best approach is to work with a high quality club fitter.
Does a tipped shaft lower spin?
Tipping a shaft, just like choosing a stiffer flex, does not guarantee lower spin. As our players moved from the untipped shaft to the 1/2″ tip to the 1″ tip, two of them did see lower spin. However, two of them registered their highest spin numbers with the most heavily-tipped shaft.
Can you buy accuracy with a stiffer shaft?
You can’t buy accuracy with a stiffer shaft, and you can’t get it by tipping your shaft either. None of our testers saw the 1″ tipped shaft stand alone for accuracy, though two were equally (or near equally) accurate with the 1″ tip and the untipped shaft.
Why do you tip a golf shaft?
Here’s another way to understand why tipping makes a shaft meaningfully stiffer. When you cut off a portion of the softest part of a golf shaft ( the tip), it increases the overall stiffness. The handle section of a shaft, on the other hand, is longer and more uniformly stiff, so removing material from the handle does not make such ...
What is shaft tipping?
Shaft tipping is when a club builder removes length from the tip section of a shaft, which is the end where the clubhead is installed. In most cases, tip trimming a shaft makes it meaningfully stiffer. It also increases torsional stiffness, known as “torque,” which is a shaft’s resistance to twisting. On the other end of the shaft is the handle, ...
How much should a golf tipping shaft be?
These recommendations can range from 0.25 inches to 1.5 inches and vary from product to product and manufacturer to manufacturer.
Why is tipping so complicated?
The reason tipping is so complicated is first and foremost the way most golf shafts are made. As we describe in this article, nearly all golf shafts on the market are made by hand with a decades-old process known as the Roll-Wrapping Method. Because these shafts are made by hand, it’s impossible for even two shafts that are supposed ...
Does trimming a shaft affect flex?
Handle trimming doesn’t affect shaft flex as much as tip trimming because most shafts become gradually stiffer as they move from tip to handle. For that reason, trimming the handle section of a shaft does not dramatically increase shaft stiffness. Here’s another way to understand why tipping makes a shaft meaningfully stiffer.
What is the tip of a golf club called?
TIPPING: The tip end of the shaft, which is inserted into the clubhead, sometimes is cut or trimmed to provide more stiffness in the shaft. This is called tipping. While the practice is common on professional tours, it is not widely used among amateur golfers.
What is the kick point of a golf shaft?
KICK POINT: Modern shafts, particularly graphite shafts, can produce kick in different sections of the shaft — high kick, mid kick and low kick being three obvious points of reference. Fitters often spend considerable time matching a golfer’s swing with a particular kick.
How much does a true temper iron shaft weigh?
True Temper’s Dynamic Gold, the most popular steel iron shaft on the PGA Tour, weighs abourt 130 grams. At the other end of the spectrum, Mitsubishi Rayon has a Bassara graphite driver shaft that weighs about 35 grams. RAW: A raw shaft is an uncut shaft that has not been installed in a clubhead.
What is a raw shaft?
RAW: A raw shaft is an uncut shaft that has not been installed in a clubhead. BLANK: This is another word for a raw shaft. When clubmakers refer to a blank, they mean a raw shaft. SPINE ALIGNMENT: Golf shafts, because they are round and hollow, have a spine that is a result of the manufacturing process.
What does low torque mean on a golf swing?
Normal measurements are in the 2- to 6-degree range. A low torque number means less twisting of the shaft but also can mean a harsher feel . A high torque number is associated with a soft-feeling shaft, although there may be a sacrifice in accuracy. FLEX: The strength of a shaft as it bends during the swing.
Where is the ferrule on a golf club?
FERRULE: The ferrule is an oval piece, commonly made of plastic, that is located just above the neck of the clubhead. Modern ferrules not only are decorative, they are made with great precision to provide accurate and secure bonding between the shaft and clubhead. BUTT: The top end of the shaft, called the butt, is located underneath the grip.
What is torque in swing?
TORQUE: A measurement of the circular rotation of the shaft during the swing.
Step 1
Check and ensure there is no debris at the shaft tip. Clean the debris on your shaft tip with a coarse sandpaper or a damp wipe. This cleaning tip will give the most precise measurement results.
Step 2
Measure the length from the shaft’s tip to the point after putting the golf shaft into the clubhead’s hosel. You can mark this point with a pen.
Step 3
Take off the shaft from the club head’s hosel. Next, remove the coating of the shaft down from the marking point in the previous step. It would help if you used coarse sandpaper or a utility knife for a graphite shaft.
Step 4
We recommend using a gauge ruler or an electronic caliper for quickly determining shaft tip sizes.
Using A Gauge Ruler
Place the shaft tip in each hole of the identification gauge until it is fully fitted. Read the label next to that hole and determine the tip’s size—the range of thickness for shaft tip usually from .270” to .370”.
Using An Electronic Caliper
Place the shaft tip between two hands of the caliper and pull them to fit the tip. Don’t forget to read the digits in the digital display.
What is the tip of a golf club?
The tip is the part of the shaft that fits into the hosel of the clubhead. The difference between the two types of shaft is the tip diameter and shaft weight.
Why do golfers prefer taper shafts?
Tour professionals and traditionalists prefer the taper-tip shaft because of the constant weight, but the average golfer will notice little difference. According to True Temper, taper- and parallel-tip shafts play the same, and blind testing with identical iron heads showed the testers noticed no difference in the clubs.
How to adjust flex on golf club?
Adjusting Flex. To adjust shaft flex with parallel-tip shafts, you change the amount you trim. To stiffen the shaft, trim more off the tip end; to weaken the flex, trim less off the tip and make the club longer. To adjust the flex with taper-tip shafts, however, you have to use a different shaft.
What size shaft is needed for a golf club?
With a parallel-tip shaft, the entire tip section--the portion below the last step--is a constant diameter. The standard size is .370 inch for irons and would require a clubhead with a .370-diameter hosel hole. Parallel-tip shafts are the same, within the model type, for each iron but are trimmed to fit the length for each club. As a result, parallel-tip shafts are heavier in the longer irons and weigh less in the shorter irons.
When did taper tip golf clubs come out?
The taper tip was the standard until the 1970s, when the parallel tip was introduced. The parallel-tip shaft allowed club makers to control inventory because they could stock just one shaft length for each model of woods and irons, instead of stocking a different length shaft for each club.
What is a parallel shaft?
Parallel-tip shafts are the same, within the model type, for each iron but are trimmed to fit the length for each club. As a result, parallel-tip shafts are heavier in the longer irons and weigh less in the shorter irons.
Why do golf shafts bend?
Shaft makers vary the amount of stiffness because golfers have different types of swings—different swing speeds, different tempos—and different amounts of stiffness in a shaft better match up to those different swings.
What happens if you mismatch your golf shaft?
If your swing is mismatched to your golf shaft flex—if you are using an X flex shaft, for example, when you should be using an R flex shaft—you will have a harder time squaring the clubface at impact. The way your shots are flying can clue you into the possibility you might be using the wrong flex.
What does it mean when a golfer's swing is slower?
The slower a golfer's swing, generally speaking, the more flex he or she requires in the shafts that are in their golf clubs. And the faster the swing, the more stiffness. Tempo also matters: A jerkier swing requires more stiffness, a smoother swing less stiffness, generally speaking.
How to choose shaft flex?
These are just general guidelines, however; the best way to choose shaft flex is to go through a club fitting. Not every golfer can (or is willing) to do that, though.
When were steel shafts invented?
Alas, no. Golf industry veteran Tom Wishon, of Tom Wishon Golf Technologies, explains: "Shortly after steel shafts were introduced in the 1920s, steel shaft makers discovered they could change the diameter and wall thickness of the tubes to create shafts with different amounts of stiffness to better match to the different swing speeds ...
What Is Tipping and Why Would You Do It?
The Myths
- Myth #1 – Tipping a shaft changes the feel Myth #2 – Tipping a shaft will reduce spin Myth #3 – Tipping a shaft will reduce launch angle Myth #4 – Tipping a shaft will improve accuracy
How We Tested
- For this test, we brought together five golfers with handicaps ranging from 10 to +3. Each player hit five drives with each of three shafts. One shaft was untipped, one was tipped 1/2″, and one was tipped 1″. The shaft used was the Nippon Regio Formula B. Each shaft was built to the same finished length and swing weight. All testing was done at and with the help of Club Champion
The Results
- Tipping a shaft unequivocally changes the feel. All five of our testers noticed a difference, though some were more sensitive to it than others. Despite not knowing which shaft they were testing, each one identified the feel as you would expect: the untipped version felt the softest, the 1″ tipping felt the stiffest. If you like the shaft you’re playing but want a stiffer feeling, tipping it sho…
Conclusion
- If you want a shaft to feel stiffer, tipping it will get results. However, tipping (just like playing a stiffer shaft) is no guarantee of lower spin, lower launch, or greater accuracy. If you’re interested in maximizing your distance off the tee and hitting more fairways, the best approach is to work with a high quality club fitter.