Getting a golf shaft tipped is when the shaft is cut back (tipped) from the clubhead end, shortening the club and making the tip of the shaft stiffer. If you tip it from the clubhead end, the club will maintain the same length with a stiffer shaft at the bottom of the club near the ball.
How do you tip a golf shaft?
Aug 17, 2014 · A tipped shaft is a term that relates to how much of the tip section was removed prior to the installation. Tipping a shaft will stiffen a shaft. Removing a sleeve really depends on what the material is as it has to be heated to be 'pulled' from the shaft
What are the best golf shafts?
Jul 17, 2013 · A shaft can be designed with many variations in the distribution of its stiffness over its whole length. A tip soft shaft is one that is designed to be more flexible in the tip portion of the shaft which we define as the last 16” to 21” of the shaft. Likewise there can be any number of variations in how stiff the tip section of a shaft is designed.
How to fit a golf shaft?
Feb 20, 2012 · TIPPING: The tip end of the shaft, which is inserted into the clubhead, sometimes is cut or trimmed to provide more stiffness in the shaft. This is called tipping. This is called tipping. While the...
How to pull a golf shaft?
Golf shafts come in different shaft flexes, weights, lengths and materials so the club maker can build a club that fits each golfer's swing. Steel shafts come in two tip types, taper and parallel....
Does tipping a shaft reduce spin?
What does tip flex mean?
Why does Taylormade tip their shafts?
What does a soft tip shaft do?
Does tipping a golf shaft help with accuracy?
Conclusion. If you want a shaft to feel stiffer, tipping it will get results. However, tipping (just like playing a stiffer shaft) is no guarantee of lower spin, lower launch, or greater accuracy. If you’re interested in maximizing your distance off the tee and hitting more fairways, the best approach is to work with a high quality club fitter.
Does a tipped shaft lower spin?
Tipping a shaft, just like choosing a stiffer flex, does not guarantee lower spin. As our players moved from the untipped shaft to the 1/2″ tip to the 1″ tip, two of them did see lower spin. However, two of them registered their highest spin numbers with the most heavily-tipped shaft.
What are the myths about the shaft?
The Myths. Myth #1 – Tipping a shaft changes the feel. Myth #2 – Tipping a shaft will reduce spin. Myth #3 – Tipping a shaft will reduce launch angle. Myth #4 – Tipping a shaft will improve accuracy.
Can you buy accuracy with a stiffer shaft?
You can’t buy accuracy with a stiffer shaft, and you can’t get it by tipping your shaft either. None of our testers saw the 1″ tipped shaft stand alone for accuracy, though two were equally (or near equally) accurate with the 1″ tip and the untipped shaft.
Why do you tip a golf shaft?
Here’s another way to understand why tipping makes a shaft meaningfully stiffer. When you cut off a portion of the softest part of a golf shaft ( the tip), it increases the overall stiffness. The handle section of a shaft, on the other hand, is longer and more uniformly stiff, so removing material from the handle does not make such ...
What is shaft tipping?
Shaft tipping is when a club builder removes length from the tip section of a shaft, which is the end where the clubhead is installed. In most cases, tip trimming a shaft makes it meaningfully stiffer. It also increases torsional stiffness, known as “torque,” which is a shaft’s resistance to twisting. On the other end of the shaft is the handle, ...
Does trimming a golf club shaft affect flex?
On the other end of the shaft is the handle, which is also generally trimmed some amount when building a golf club. Handle trimming doesn’t affect shaft flex ...
Does trimming a golf shaft increase stiffness?
For that reason, trimming the handle section of a shaft does not dramatically increase shaft stiffness. Here’s another way to understand why tipping makes a shaft meaningfully stiffer. When you cut off a portion of the softest part of a golf shaft (the tip), it increases the overall stiffness. The handle section of a shaft, on ...
How much should a golf tipping shaft be?
These recommendations can range from 0.25 inches to 1.5 inches and vary from product to product and manufacturer to manufacturer.
How are golf shafts made?
As we describe in this article, nearly all golf shafts on the market are made by hand with a decades-old process known as the Roll-Wrapping Method. Because these shafts are made by hand, it’s impossible for even two shafts that are supposed to be identical to feel or perform the same. Some tour players are known to test multiple versions ...
Why is tipping so complicated?
The reason tipping is so complicated is first and foremost the way most golf shafts are made. As we describe in this article, nearly all golf shafts on the market are made by hand with a decades-old process known as the Roll-Wrapping Method. Because these shafts are made by hand, it’s impossible for even two shafts that are supposed ...
What does it mean when a golf shaft is tipped?
Getting a golf shaft tipped is when the shaft is cut back (tipped) from the clubhead end, shortening the club and making the tip of the shaft stiffer. If you tip it from the clubhead end, the club will maintain the same length with a stiffer shaft at the bottom of the club near the ball.
Why do you tip a golf shaft?
Tipping a golf shaft allows players to have more control over their club. It allows players to feel the proper flex and help control their ball flight trajectory. Making the shaft stiffer helps lower torque and lessens a golfers chances of twisting the club at impact which usually results in bad shots.
How many inches does Tiger Woods cut his driver shaft?
Tiger Woods cut his driver shaft to 42.5 inches at one point in his career when using a True Temper X-100 steel shaft. About 90 percent of all fairway woods are trimmed on the PGA Tour. Woods are commonly tipped three to four inches.
What happens if you cut a golf club from the butt?
If you cut a club from the butt end then you will make the club shorter and stiffer. If you cut too much length off and shorten the club too much, you will have it stiffer but you might lose distance as well.
What is the tip of a golf club called?
TIPPING: The tip end of the shaft, which is inserted into the clubhead, sometimes is cut or trimmed to provide more stiffness in the shaft. This is called tipping. While the practice is common on professional tours, it is not widely used among amateur golfers.
Where is the butt on a golf shaft?
BUTT: The top end of the shaft, called the butt, is located underneath the grip.
What is a high torque shaft?
A high torque number is associated with a soft-feeling shaft, although there may be a sacrifice in accuracy. FLEX: The strength of a shaft as it bends during the swing. Because extra stiff, stiff, regular, seniors and ladies flexes are measured in so many ways, these designations have become broad in nature.
What is a raw shaft?
RAW: A raw shaft is an uncut shaft that has not been installed in a clubhead. BLANK: This is another word for a raw shaft. When clubmakers refer to a blank, they mean a raw shaft. SPINE ALIGNMENT: Golf shafts, because they are round and hollow, have a spine that is a result of the manufacturing process.
What is the difference between a lower kick point and a higher kick point?
A lower kick point produces a higher trajectory, while a higher kick point results in a lower flight pattern. FERRULE: The ferrule is an oval piece, commonly made of plastic, that is located just above the neck of the clubhead.
What is torque in swing?
TORQUE: A measurement of the circular rotation of the shaft during the swing.
What is the tip of a golf club?
The tip is the part of the shaft that fits into the hosel of the clubhead. The difference between the two types of shaft is the tip diameter and shaft weight.
Why do golfers prefer taper shafts?
Tour professionals and traditionalists prefer the taper-tip shaft because of the constant weight, but the average golfer will notice little difference. According to True Temper, taper- and parallel-tip shafts play the same, and blind testing with identical iron heads showed the testers noticed no difference in the clubs.
How to adjust flex on golf club?
Adjusting Flex. To adjust shaft flex with parallel-tip shafts, you change the amount you trim. To stiffen the shaft, trim more off the tip end; to weaken the flex, trim less off the tip and make the club longer. To adjust the flex with taper-tip shafts, however, you have to use a different shaft.
What size shaft is needed for a parallel tip iron?
With a parallel-tip shaft, the entire tip section--the portion below the last step--is a constant diameter. The standard size is .370 inch for irons and would require a clubhead with a .370-diameter hosel hole. Parallel-tip shafts are the same, within the model type, for each iron but are trimmed to fit the length for each club.
Why do clubs have parallel shafts?
The parallel-tip shaft allowed club makers to control inventory because they could stock just one shaft length for each model of woods and irons, instead of stocking a different length shaft for each club. With parallel-tip shafts, the manufacturers trim the tip for flex and trim the butt (top) of the shaft for length.
What is the diameter of a parallel tip?
Parallel Tip. With a parallel-tip shaft, the entire tip section--the portion below the last step--is a constant diameter. The standard size is .370 inch for irons and would require a clubhead with a .370-diameter hosel hole. Parallel-tip shafts are the same, within the model type, for each iron but are trimmed to fit the length for each club.
What is the average tip on a driver?
Tipping instead of trying a different flex allows a player to find a shaft with a firmness in between flexes. The average tip on drivers is about an inch, although some players go to greater lengths.
Do fairway woods need to be tipped?
Still, fairway woods require shorter shafts than drivers, requiring many to be tipped. Matt Every, for example, recently tipped his Aldila Tour Blue 75x shaft in his 3-wood 1.5 inches. Altering the flex is different in irons. Players will "step up" or "step down" rather than trim the tip on steel shafts with steps.
What Is Tipping and Why Would You Do It?
The Myths
- Myth #1 – Tipping a shaft changes the feel Myth #2 – Tipping a shaft will reduce spin Myth #3 – Tipping a shaft will reduce launch angle Myth #4 – Tipping a shaft will improve accuracy
How We Tested
- For this test, we brought together five golfers with handicaps ranging from 10 to +3. Each player hit five drives with each of three shafts. One shaft was untipped, one was tipped 1/2″, and one was tipped 1″. The shaft used was the Nippon Regio Formula B. Each shaft was built to the same finished length and swing weight. All testing was done at and with the help of Club Champion
The Results
- Tipping a shaft unequivocally changes the feel. All five of our testers noticed a difference, though some were more sensitive to it than others. Despite not knowing which shaft they were testing, each one identified the feel as you would expect: the untipped version felt the softest, the 1″ tipping felt the stiffest. If you like the shaft you’re playing but want a stiffer feeling, tipping it sho…
Conclusion
- If you want a shaft to feel stiffer, tipping it will get results. However, tipping (just like playing a stiffer shaft) is no guarantee of lower spin, lower launch, or greater accuracy. If you’re interested in maximizing your distance off the tee and hitting more fairways, the best approach is to work with a high quality club fitter.