What is torque in golf shafts?
"Torque" is a property of golf shafts that describes how much the shaft is prone to twisting during the golf swing. All shafts, steel and graphite, exhibit torque, which is measured in degrees.
How do you measure torque on a shaft?
Shaft torque is measured by a device that records the amount a shaft will twist under a certain amount of force, and it’s recorded in degrees. A shaft with 3 degrees of torque will twist less than a shaft with 5 degrees of torque, and so on.
How much does shaft torque affect accuracy?
The shaft resists that twisting motion, allowing only a certain amount. The twisting that is allowed, measured in degrees, is the shaft's torque. A low-torque shaft may allow only 2 degrees (or less) of twist, while a high-torque shaft might go all the way to 6 degrees. That might not sound like a lot, but it certainly can affect your accuracy.
What does torque mean on golf shafts?
a twisting force thatTorque is defined as “a twisting force that tends to cause rotation.” In the case of a golf shaft, it's the amount of twisting (or lack thereof) that occurs during the swing.
What does the torque number on a shaft mean?
A shaft with a lower torque rating means the shaft better resists twisting; a shaft with a higher torque rating means the shaft is more prone to twisting (all other things being equal). A golfer's swing, and the clubhead attached to the end of the shaft, exert forces on the shaft that lead to twisting.
What torque shaft should I use?
1) Players who tend to hook the ball will benefit from a lower torque shaft. Players who tend to slice the ball will benefit from a higher torque shaft. 2) Players who swing faster need lower torque.
What does high torque mean?
In simple terms, the more torque an engine has, the better suited it is to hard work such as towing, hauling or climbing steep grades. This is why torque is often the figure of utmost importance when moving something big and heavy, like a truck with a trailer attached.
What weight driver shaft should I use?
Briand's recommendation is to use your current driver shaft as a baseline. If your shots tend to be low and with little spin, try a slightly softer flex. If your shots are ballooning, try a stiffer flex. If you're caught between two flexes, you can “tip” a softer flex to make it stiffer in the tip section.
How does golf shaft torque affect ball flight?
If we think about torque affecting how the club head is delivered to the ball at impact, you can imagine that it would affect ball flight. One study in 2017, showed that shafts with a higher torque caused a more open club face at impact which led to a slightly higher launch that tended to go right.
What is torque in a shaft?
Torque is really pretty simple: it’s the shaft’s resistance to twisting. Torque is measured in degrees (meaning: how many degrees will the shaft twist under a certain amount of force), and you’ll typically see measurements as low as 2° and as high as 5°, 6°, or 7°. As with many other things, these numbers don’t necessarily mean a lot ...
What are the two main tenets of torque?
The conventional wisdom on torque consists of two major tenets: 1) Players who tend to hook the ball will benefit from a lower torque shaft. Players who tend to slice the ball will benefit from a higher torque shaft. 2) Players who swing faster need lower torque.
Why should you care about torque?
You should care because torque is a major component in how a shaft feels, much more than flex . You could have an XX-stiff shaft with high torque, and it might feel “smooth” or even “whippy.”. Alternately, you could have a senior flex shaft with low torque that can feel “boardy.”.
Does torque affect where the ball ends up?
Torque also has a major impact on where the ball ends up. All other things being equal, a shaft with higher torque will lead to a club face that is pointed further left (for a RH golfer) at impact…but we know “all other things” are rarely equal when you add in the human element.
Is torque a rule?
Torque matters, and, like flex and weight , there are no easy rules to follow. You need to try a variety of things and be fit into the shaft that will work best for you.
What is torque in golf?
Warren Little / Getty Images. "Torque" is a property of golf shafts that describes how much the shaft is prone to twisting during the golf swing. All shafts, steel and graphite, exhibit torque, which is measured in degrees. A high-torque shaft will twist more than a low-torque shaft. Put another way, some shafts resist twisting better than others.
What does it mean when a shaft is high torque?
A high-torque shaft will twist more than a low-torque shaft. Put another way, some shafts resist twisting better than others. A shaft with a lower torque rating means the shaft better resists twisting; a shaft with a higher torque rating means the shaft is more prone to twisting (all other things being equal). ...
What is twisting in golf?
A golfer's swing, and the clubhead attached to the end of the shaft, exert forces on the shaft that lead to twisting. This twisting is simply a part of the swing.
Why is torque narrow?
In steel shafts, because the type of steel material is the same throughout the entire shaft, the torque exists in a very narrow range of degrees, one that is much more narrow than in graphite shafts.
Is torque a factor in golf shaft selection?
Therefore, torque is not a factor to worry about in the selection of a steel shaft, but it is a point to keep in mind for some golfers when selecting a graphite shaft.
What is torque in golf?
Torque is defined as "a force that produces or tends to produce rotation or torsion." If you think of a golf shaft as an axis, the heel of the head is centered on that axis, but the toe – as well as most of the clubhead's weight – is off-center. When you swing the club, the head twists around the shaft. The toe gets "left behind" as you start your downswing, then it "catches up" and returns to its normal position at impact. The shaft resists that twisting motion, allowing only a certain amount. The twisting that is allowed, measured in degrees, is the shaft's torque.
Why do golfers use low torque shafts?
Power players such as PGA Tour golfer Dustin Johnson generally use low-torque shafts to better help them control the ball. Golf shafts have many technical specifications that you, as an average golfer, likely never consider. You are indirectly aware of them because they affect how your clubs feel when you swing them.
Why are you aware of the specs on your golf clubs?
You are indirectly aware of them because they affect how your clubs feel when you swing them. But those specs affect how your club performs, and club fitters take them into account when they fit you for new clubs. Torque is one of those "invisible" specs, and it has a bigger effect on club performance than you might expect.
How much twist does a high torque shaft have?
A low-torque shaft may allow only 2 degrees (or less) of twist, while a high-torque shaft might go all the way to 6 degrees. That might not sound like a lot, but it certainly can affect your accuracy.
What happens when you swing a golf club?
When you swing the club, the head twists around the shaft. The toe gets "left behind" as you start your downswing, then it "catches up" and returns to its normal position at impact. The shaft resists that twisting motion, allowing only a certain amount.
Does torque matter in golf shafts?
The material used to make your shaft matters. While torque always has been a factor in shaft performance, the inherent stability of steel shafts made torque relatively unimportant to everyday golfers.
Can graphite shafts be duplicated?
With the introduction of graphite shafts, however, manufacturers now can tailor shafts to behave anyway they want; they can duplicate the performance of any material from classic hickory to high-tech steel. But this comes at a price; the less torque you want, the more you have to pay for it.
What is torque in golf?
Torque is the simply the amount a golf shaft (shown in blue) twists when subjected to a known amount of force (usually one foot-pound of force is applied) and the torque value is always expressed in degrees. It is a term commonly associated with composite or graphite shafts, but steel shafts have a certain degree of torque too.
Why are shafts less accurate?
One of the reasons shafts with higher torque values are considered less accurate can be attributed to the cost. Often times the higher torque wood shafts (above 6°) will be less than $9 retail and may not be 100% graphite, but have a certain percentage of fiberglass mixed in. One clue is to look at the shaft weight.
What happens if you use less material on a shaft?
If less material is used (due to the lighter weight), there is less material available to control torque or resist twisting.
Is there a standard for golf shafts?
I like to say “the only standard in the golf industry is there are no standards.”. Each manufacturer has an internal method for measuring torque that will vary from one to the next. However, each shaft by the manufacturer will be measured using the exact same clamping dimensions and force for all their shafts.
Does steel have torque?
It is a term commonly associated with composite or graphite shafts, but steel shafts have a certain degree of torque too. However the amount cannot be independently changed from the frequency (or stiffness) of the shaft like a composite design, thus torque of steel shafts is generally not listed by the manufacturer.
What happens when you have less torque in your golf club shaft?
When you have more torque in your club shaft it is said that your shots can be less accurate but go further and have a nice soft feel.
Why is shaft torque important?
Shaft torque becomes increasingly important the faster you swing. Torque is the measure of how much the shaft twists during the golf swing. It may be hard to imagine this even happening, but shafts are made with that particular fact in mind. They are even made to resist it more or less, depending on your swing and what kind ...
Why does a steel shaft have less torque?
A steel shaft will have less torque simply because of the material it is made of. A degree of 3 to 4 is normal for a steel shaft. Graphite shafts can have a lot more torque. Since graphite is not a solid piece of material, the torque can be much higher; to degrees of 7 or 8.
When you strike the ball, do you want your club head to be square?
When you strike the ball, you want your club head to be as square to your target as possible. When the club head twists, it can make the club head a degree or two open or closed when it makes contact. Therefore you want less torque when you are looking to straighten your ball flight.
Does Tiger Woods know how much torque he needs?
Certainly Tiger Woods knows exactly how much torque he needs for every club in his bag , but for a beginner it won't matter much. Torque should be one of the last things you look at when trying to improve your game. Golfweeks' Adam Woodard breaks down the results from the match.
What does torque mean in golf?
Torque can also be thought of as a force that leads to rotation within a golf club, or a measure of approximately how much twist there is in a particular club.
What is flex in golf?
The flex of a golf club shaft is the energy stored during the downswing, upon which it is released at the point of impact. This flex is directly correlated with torque, in that the more a club can flex the better it can rotate around its axis (which, in essence, is the definition of torque). Of course, the more flex there is in a golf club, the more torque--and in all likelihood-- the less accuracy and forgiveness on a golf shot.
How is shaft torque measured?
Shaft torque is measured by a device that records the amount a shaft will twist under a certain amount of force, and it’s recorded in degrees. A shaft with 3 degrees of torque will twist less than a shaft with 5 degrees of torque, and so on. Torque is a separate variable from the more talked about measurement of “shaft flex,” which deals with ...
What is torque in golf?
THE MOST IMPORTANT THING TO KNOW ABOUT TORQUE 1 A lower-torque shaft will help a golfer create a more leftward dispersion. 2 A higher-torque shaft will help a golfer create a more rightward dispersion. 3 These guidelines seem to fly in the face of conventional wisdom about shaft torque, which has long stated that lower-torque shafts help golfers avoid a snap hook due to their greater resistance to twisting.
How does torque affect dispersion?
While it’s true that low-torque shafts are more resistant to twisting, it’s this same resistance to twisting that actually causes a shaft to “snap back to square” more easily than higher-torque shafts at impact and thus produce a tendency to move dispersion to the left.
What shafts help with left and right dispersion?
A lower-torque shaft will help a golfer create a more leftward dispersion. A higher-torque shaft will help a golfer create a more rightward dispersion. These guidelines seem to fly in the face of conventional wisdom about shaft torque, which has long stated that lower-torque shafts help golfers avoid a snap hook due to their greater resistance ...
Is torque important in shaft fittings?
Torque is not the most important consideration in most shaft fittings, but it must always be considered. In this article, we dive into what our testing reveals about torque so you can understand torque it does… and just as importantly, what it doesn’t do.
Can you hit a drive with a junior golfer's driver?
Imagine you’re a golfer with a very fast swing speed, and just for fun, you hit a drive with a junior golfer’s driver. Because this shaft is too weak for you in terms of torque, the first swing you make with the junior club is likely to create a big miss to the right if you’re a right-handed golfer.
Is torque a variable?
Torque is a separate variable from the more talked about measurement of “shaft flex,” which deals with the up and down bending of a shaft, but the two variables are related in the sense that more flexible shafts tend to have higher torque and stiffer shafts tend to have lower torque. The reason for this relationship is that a golf shaft is both ...
Why are low torque shafts so expensive?
“As you go up in grade of material, which is actually going up in stiffness and strength of the material, you essentially double the cost of the material for every step you take up ,” said designer John Oldenburg.
What materials are used to stabilize a golf swing?
Torque can be controlled a number of different ways, but the most common is utilizing exotic materials — including Kevlar, Carbon, Boron and Zylon — to stabilize the shaft. Accomplishing this makes the profile more resistant to unwanted twisting during the swing, especially at impact. In other words: improved consistency.
