Full Answer
What is the proper ratio of oil to gas for 2-cycle golf carts?
The proper ratio of oil to gas for an E-Z-GO 2-cycle golf cart is 1 gallon of gas to 1 ounce of oil. This is defined numerically as the ratio 128:1. The E-Z-GO company officially stopped producing its 2-cycle golf carts in 1991, when the 4-cylinder carts were introduced.
Is there a maintenance kit for an EZ GO golf cart?
This EZ-GO Golf Cart Maintenance Kit is designed for ALL GAS EZ-GO GOLF CARTS (1991+). Need to do some annual maintenance on your EZ-GO golf cart? This tune-up kit has just what you need to keep your cart running smoothly for years to come.
Do EZGO golf carts overheat?
Some older models of EZGO golf carts are known for heating up quite frequenctly. Some owners of the EZGO TXT complain that their golf cart overheats up after an uphill ride of 35 to 40 minutes. They are barely able to rest their hands on the bonnet because the bonnet is too hot.
What octane gas should I run in my golf cart?
Golf cart manufacturers recommend running only 87 octane gasoline. If you are located in a high altitude level, or running your golf cart under high loads or heavy use you may benefit from a higher octane gasoline.
What is gas and oil mixture for a golf cart?
The best oil-to-gas mixture ratio for 2-cylinder engines is 1 ounce : 1 gallon.
How can I make my EZ GO gas faster?
One way to increase the speed of EZ Go golf carts is to incorporate an octane booster when you fill the tank. The cart will have more pick-up, and it could gain as much as 5 mph. A different approach is to take out the throttle linkage governor on the carburetor.
How much oil does a ezgo gas golf cart take?
The typical engine oil which is used in most of the EZGO carts is 10W-30 and 10W-40. The oil capacity of an EZGO cart is around 6 cups.
Are EZ GO golf carts fuel injected?
Augusta Golf Cars is excited to announce that beginning January 2019 all E-Z-GO and Cushman Petrol vehicles will be equipped with a closed-loop electric fuel injection (EFI) engine. This advanced system has an enhanced fuel economy, no choke, and the ability to adjust to varying weather conditions.
How do I get more power from my gas golf cart?
How to Make Your Gas-Powdered Golf Cart Faster [Updated, 2022]1 Use A Better Golf Cart Battery.2 Increase Torque.3 Upgrade the Golf Cart Motor.4 Install a Torque Converter.5 Install a Higher-Performance Clutch.6 Tweak The Governor.7 Install A Cold Air Intake.8 Get Bigger Golf Cart Tires.More items...•
How do you remove the speed limiter on a electric golf cart?
Basically, an electric speed governor can be controlled by a tiny metal rod that's located by the clutch of your golf cart. First things first: The electric speed governor is connected to a cable. You can adjust your speed by rotating the nut in a counterclockwise rotation.
What oil do you use in an EZGO golf cart?
10W-30 grade10W-30 grade engine oil.
Can I use synthetic oil in my EZGO golf cart?
Yes! We are pleased to tell you that it is indeed possible for you to use synthetic oil in your gas golf cart.
What gas engine is in EZGO golf cart?
It comes with a choice of the EX1 close looped gas engine or the 48 DC drive train. If you are looking for better mileage, smoother acceleration, and less maintenance, the EZGO golf cart should be at the top of your wish list.
How fast is a EZGO gas golf cart?
And the fastest electric EZGO is the 2Five that goes 25 mph. And the fastest EZGO gasoline golf cart also only goes 19 mph.
Is EZGO Valor a txt?
The EZGO Valor TXT comes with 20-inch tires while the RXV has 18-inch tires.
How do I tell what model my EZGO golf cart is?
The serial number and manufacturer's number for these EZGO golf cart models can be found on a plate located under the glove box on the passenger's side of the vehicle. The serial number is either six or seven numbers and does not indicate the model year. The manufacturer's number does reflect the model year.
How hot should an EZGO golf cart motor be?
The ideal maximum of a EZGO golf cart motor should reach no higher than 220 degrees Fahrenheit. ( 104 degrees Celsius) This means that you can rest your hand on the cart for barely 5 seconds before it burns your hand.
How to cool down an EZGO cart?
For this, you need to arrange for a half inch diameter copper tube. You can use it to wrap it around the outside of your cart’s motor.
How many volts does an EZGO RXV have?
Any change in the batteries can overheat the solenoid. The EZGO RXV’s solenoid comes with the label of activation on 36 Volts per compartment. But it might surprise you that most of the assembly line RXVs comes equipped with 4×12 Volts battery set up.
Why is my EZGO motor hot?
Some of these are: If you drag your car uphill on a steep terrain, especially without pausing, it will get very hot within half an hour of run time. Driving slow, like 2 to 3 miles per hour can also heat up the EZGO motor dramatically under normal conditions.
How long does it take for an EZGO to overheat?
Some owners of the EZGO TXT complain that their golf cart overheats up after an uphill ride of 35 to 40 minutes. They are barely able to rest their hands on the bonnet because the bonnet is too hot. The ideal maximum of a EZGO golf cart motor should reach no higher ...
How many inches of tyres does a TXT have?
The TXT as well as the RXV support tyres of about 18 inch. So if you try to lift your buggy or try some customisation with bigger radius tyres, your car will heat up really easy. So make sure you avoid that.
Why does my golf cart battery freeze?
As golf cart batteries contain lead acid, If you carelessly keep the batteries in a discharged throughout the winter, the electrolytes present in the battery casing will freeze due to getting too cold. On freezing, the electrolyte will expand; causing the battery shell to crack and the acid might leak out.
AN ENGINE LIKE NO OTHER FOR AN EXPERIENCE LIKE NO OTHER
All new, and purpose-built for golf carts, E‑Z‑GO’s EX1 engine is not only going to raise the bar for performance, it’ll make you want to take the long way home. You have to experience it to believe it.
Best-in-Class Fuel Economy
EX1 has advanced technology that lets you get more miles out of one tank. Fewer fill-ups means more time making memories.
A Smooth, Quiet Refined Ride
Less noise from your golf cart means you can enjoy the moment even more.
Less Downtime, More You Time
With easier maintenance and fewer wear parts, your ownership experience is a breeze.
More Responsive Acceleration
Experience a ride unlike any other gas golf cart with smoother acceleration and stops.
What are you really driving?
Competitors’ golf carts use the same generic industrial engines as power washers or generators. E‑Z‑GO’s EX1 was designed and purpose-built for golf carts. Once you see what’s behind other vehicles’ lackluster performance, you’ll understand why EX1 is superior to anything you’ve driven before.
PURPOSE-BUILT TO PERFECTION
We refined everything about our EX1 gas engine to ensure you can worry less and experience more.
How to adjust carburetor on golf cart?
In most cases, you’ll need to adjust the jet pilot screw, perform a valve clearance adjustment and then clean the carburetor.
How to cool down a golf cart?
Procedure. Turn off the golf cart engine and allow it to cool for a couple of hours before you start working. This cooling down prevents damage to the cart and injury to yourself when you’re at work. Turn off the fuel-supply valve and remove the fuel line to prevent flooding of the fuel and other complications.
How to replace carburetor float?
Remove the carburetor and turn it upside down. Remove the nut that is used to secure the bowl on. Check the float for a puncture as this prevents the activation of the fuel cut-off needle valve. Replace the float if there is a puncture. Check for dirt accumulation in the needle valve.
Why does an EFI carb require more maintenance than an EFI?
The carb requires more maintenance than an EFI because of the cleaning and rebuilding of the carburetor involved.
Why does my carburetor flood on my golf cart?
The reason why a carburetor floods on a golf cart is usually due to a faulty fuel pump. The pump must be repaired or replaced accordingly. Seek professional assistance if required. This is usually due to the proximity of the fuel line to an exhaust manifold, a radiator hose or a heat source.
Which is more powerful, carb or EFI?
The carb model is more powerful as well as starts and goes faster when compared to the EFI. The EFI experiences delay to start moving when the pedal is pressed.
How to remove cable from carburetor?
Remove the cable from the carburetor and cover its sheath opening using duct tape. To do this, make a small funnel with the tape and ensure that the wire sticks out from its middle. Loosen the nut that fixes the cable on to the mount housed on the motor just before its entry into the carburetor.
What is a golf cart?
Golf carts are also known as golf cars. The term "cart", in its purest sense, refers to a vehicle that does not travel under its own power. Golf cars, however, are most commonly referred to as golf... link to Club Car DS Wiring Diagrams 1981 To 2002.
How to remove fuel filter from fuel pump?
To remove the filter, disconnect the hose from the fuel pump by using a pair of pliers to squeeze the clamp ends together and sliding the expanded clamp further down the line. Raise the hose up and allow any excess fuel to drain back into the fuel tank.
Where is the second filter on a carburetor?
Return the filter to the gas line and secure it with the clamps. Sometimes there is a second filter located underneath the carburetor facing the front of the cart. Check to see if you have one and make sure it is also clear of deposits.
Step 1
Start the engine and allow it to warm. Park the golf cart on a level surface, apply the parking brake and remove the ignition key.
Step 2
Clean the top of the engine’s oil cap, as well as the area immediately surrounding the cap, with a lint-free rag to avoid having potentially harmful debris inadvertently enter the engine when the oil cap is removed.
Step 3
Place an oil drain pan underneath the oil filter. The oil filter is located within a triangular metal housing and is attached to the engine with three bolts.
Step 4
Remove the oil filter’s three retaining bolts with a wrench, then pull the filter out of the engine and allow the oil to drain into the pan. Do not lose the large rubber O-ring that surrounds the filter.
Step 5
Clean the oil filter with either an engine degreaser, available at most automotive parts stores, or with compressed air. If using a degreaser, brush the degreaser onto the filter with a paintbrush and allow it to air dry.
Step 6
Wipe the area surrounding the engine’s oil filter mount with a lint-free rag, then slide the oil filter into place within the engine and install the filter’s three retaining bolts with a wrench.
Step 7
Twist off the engine’s oil cap from the top of the engine, and insert a funnel into the opening. Pour 10W-30 grade engine oil into the funnel in small increments, periodically stopping to check the fluid level on the engine’s oil dipstick. The dipstick has two lines and the letter “F” stamped into it.
How to repair a crack in a golf car canopy?
To repair a crack in the canopy or body, use a fiberglass repair kit. Tires on EZ Go golf cars are tubeless, so you can repair them as you would a car tire. Perform regular maintenance on EZ Go golf cars to keep them in prime condition. For electric models, this includes making sure the tires are properly inflated and cleaning ...
Can you fix an EZ Go golf car?
From fixing a cracked canopy to replacing the battery, many repairs can be done on your own. However, more complex issues with the drive mechanism, accelerator assemblies and axles, should be handled by a pro.