What is a solenoid on a golf cart?
It is one of the main components of your golf cart that allows it to move. Whether you have a Yamaha, E-Z-GO, or Club Car golf cart, and no matter if it is an electric or gas golf cart, you need a properly operating solenoid to get anywhere. What is a solenoid? What does my solenoid do exactly? Where is my solenoid? What is a solenoid?
What type of solenoid for Yamaha G2 electric only?
NO LONGER AVAILABLE, Use SO22-040 +++ Solenoid for 1985 to 1991 Yamaha G2 electric only, 36 Volt with 4 Terminals and silver contacts.
What kind of solenoid do you use for electric EZ GO?
White-Rodgers 36 Volt, Heavy Duty 4 Terminal Short Housing Solenoid with Silver Contacts for Electric E-Z-GO, Cushman, Melex, Legend, Nordskog, Karrior, Otis, and Pargo... Also Westinghouse Marketeer electric models 436 and 437, HMK Marketeer models 438 and 439, Nordco Marketeer model 139 and 150...
How does a starter motor work on a golf cart?
Power is applied to the solenoid low-voltage terminals, and the piston travels back, simultaneously bridging the contacts to the starter motor and pulling back on the lever to engage the pinion gear. On some models of golf carts, the starter is also the alternator and acts to charge the battery as the cart is driven.
Can I use any solenoid on my golf cart?
Finally, remember to buy a solenoid that's compatible with the voltage in your golf cart. Usually, that means you'll need a 36-volt option or a 48-volt option. Check your old solenoid if you're unsure–the voltage is on the side.
Can you bypass a solenoid on a golf cart?
Bypassing Golf Cart Solenoid Method If you do decide to bypass the solenoid, this is what you need to do: Take the two larger wires that connect to the solenoid and connect them directly (keeping all safety precautions in place). This should do the trick and if it does not work then the solenoid is not the problem.
How do you test a 36 volt solenoid on a golf cart?
Set your multimeter to ohms and insert a probe on each large terminal with the key off and the cart direction switch in the neutral position. Press on the accelerator with the cart's movement control in the forward position, and the key is turned on. A click should be heard first from the solenoid.
How many amps does a 36 volt golf cart pull?
1,350The Five Most Common Golf Cart Battery PacksBattery System TypeVoltageAmps (Estimated)6-6 Volts36 Volts1,3504-12 Volts48 Volts6006-8 Volts48 Volts1,0208-6 Volts48 Volts1,8001 more row•Nov 3, 2020
Will an electric golf cart run with a bad solenoid?
The ability of your golf cart to function properly depends largely on the solenoid. If the solenoid is broken and not working correctly, you may notice your golf cart won't start, picking up speed, or even working at all (issues with acceleration could also be caused by a bad speed controller).
How do you cross a starter solenoid?
3:257:29Solenoid Bypass - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou can do that with a screwdriver. You can do it with a pair of jumper cables. Anything you wantMoreYou can do that with a screwdriver. You can do it with a pair of jumper cables. Anything you want but basically all you got to do is get power from the positive terminal of the battery.
How do I test my EZGO 36v solenoid?
This can Also be tested by putting a test lead on each small terminal and pressing the gas pedal. The meter should read 36 V when the gas is pressed. If this voltage does exist when the gas pedal is pressed then the solenoid should click and engage.
Why does my golf cart click but not move?
A Club Car golf cart can start clicking but not move, due to dust accumulating inside the battery ports. Opening the battery ports and checking whether there is any dust accumulation can tell you if this is the case. Cleaning it thoroughly with a cloth can resolve the problem.
What would cause an electric golf cart not to move?
Solenoid Wear When there is a disruption in the flow of the electrical current, your cart will not operate. A common reason for current disruption is solenoid wear. Each time the solenoid activates as you press down on the gas pedal, the solenoid compounds down onto a thin metal contact plate.
How can I make my 36V golf cart go faster?
6 Ways You Can Make a Golf Cart FasterAdd More Torque to Your Golf Cart.Upgrade Your Golf Cart's Motor.Improve the High-Speed Controller of the Cart.Add Better Golf Cart Tires.Use a Higher Powered Golf Cart Battery.Watch the Weight in Your Golf Cart.
How fast will a 36V golf cart go?
between 12-14 mphHow fast is a 36 volt golf cart? Without any upgrades, you can plan on max speeds between 12-14 mph.
How many volts is a full charge on a 36 volt golf cart?
The peak charging voltage for Gel batteries is 2.3 to 2.36 volts per cell, and for a 36 volt charger this works out to 41.4 to 42.5 volts, which is lower than a wet or AGM type battery needs for a full charge.
Special offers and product promotions
Amazon Business: Make the most of your Amazon Business account with exclusive tools and savings. Login now
Customer reviews
There was a problem filtering reviews right now. Please try again later.
More to consider from our brands
Pages with related products. See and discover other items: ezgo electric golf cart, yamaha golf cart parts, parts yamaha golf carts, ezgo parts, club car golf cart ds parts, g2 yamaha golf cart parts
Where are the solenoids on a golf cart?
In all golf carts, new and old, the solenoids can be found under the seat or in the engine well and are easily identifiable by the wires that lead to them. Banks of heavy duty solenoids, as in the previous illustration, are mounted on the side or back panel near the electric motor.
How to test golf cart solenoid?
A diode allows current to run in one direction, but not in the other. Testing the diode is a simple procedure. Remove the diode from the circuit and check the leads with a continuity tester.
Why doesn't my golf cart solenoid click?
This can be a faulty wire connection, but can also mean the solenoid is beginning to fail. The golf cart solenoid doesn’t click when the accelerator is pressed. This again can be faulty wiring or a failed solenoid.
What to do if your solenoid is not zero?
If the reading is not zero, then the solenoid is stuck and needs to be replaced. If the ohmmeter does read zero, set the cart to forward travel and turn the key switch on. Press the accelerator pedal (or have a friend do it) and you should hear a click. If you don’t hear a click, measure the resistance anyway.
How to tell if solenoid is bad on golf cart?
The common symptom of a bad solenoid is no clicks when the cart’s ignition is on and you press the accelerator.
How to tell if a golf cart won't start?
The first and most obvious symptom is the golf cart won’t start. If it is a gas-powered cart, the engine doesn’t turn over, and if it is an electric cart, the cart doesn’t move. Now, on to the next symptoms…. The engine on the gas-powered cart starts, but the starter doesn’t disengage after starting.
Is a solenoid an electromagnet?
A solenoid is NOT an electromagnet, but like an electromagnet, it IS a coil of wire, partially surrounding an iron core, that is made to move inside the coil by the magnetic field caused by current flowing through the coil. It is used to convert electrical energy to mechanical energy, as in the operation of a switch.