- Honma. Honma is certainly the biggest and best known Japanese manufacturer and for good reason. ...
- Miura. If you are looking for a traditional Japanese manufacturer, the first choice is certainly Miura. Miura is a relatively small forge in Japan, founded by Katsuhiro Miura.
- Vega. Vega Golf is certainly not familiar to everyone and not as well known as Honma or Miura. ...
- Mizuno. Mizuno is certainly the largest manufacturer of Japanese golf clubs in terms of volume and is also played most often on the Tour - at least with the irons.
- Srixon. Srixon is a manufacturer that is especially known for its balls and is definitely one of the best in the world in this area.
- Ryoma. Ryoma is still a rather unknown manufacturer who is only now trying to really gain a foothold in Europe.
- XXIO. XXIO is a manufacturer that has only recently appeared on the map. ...
- Fujimoto. Although Fujimoto has been active since the 1960s, few have heard of this manufacturer. ...
- Kyoei. Kyoei is definitely a manufacturer of high quality Japanese irons and wedges, but only for a very special group of buyers.
- Best irons made in Japan. It is impossible to find "the best" among all Japanese manufacturers. The requirements and player profiles are too different for that.
- The Best Japanese Drivers 2021. Admittedly, Japanese manufacturers are better known for forged irons, wedges and putters than for woods.
Are there any good golf clubs made in Japan?
There are several well known golf club manufacturers from Japan like Mizuno, Miura, Honma and a couple of smaller ones. All of them are well known for their superior quality. Japanese Golf Clubs Manufacturers and Brands – ExactGolf
What do Americans think about Japanese golf clubs?
In truth there is nothing magic about Japanese clubs per se. What Americans find intriguing is the difference in selection (much much wider over there than here) in terms of brands, and variations of clubs, clothing and accessories. It's really neat!
What do you like most about Japanese golf irons?
One thing I appreciate about Japanese consumers and the Asian golfing market in general is that they aren’t given to technological gimmicks that the US manufacturers seem to trade off of. This gives them the design freedom to create aesthetically beautiful irons without any loss in performance over their US counterparts.
Are Srixon clubs made in Japan?
The large range of popular Srixon golf balls is manufactured in Srixon's ultra-modern manufacturing facility in Japan. In addition to the golf ball manufacturing plant, Srixon produces golf clubs at a variety of locations throughout Asia as well as the USA.
Are all Mizuno irons forged in Japan?
Mizuno golf clubs are made in Japan, but they are assembled in the United States. For many golf companies, to do the entire development of the clubs outside of the United States, it gets too expensive.
What golf clubs are forged?
Best Forged Irons In GolfTaylorMade Golf P790 Iron Set. If you really don't have a problem with splurging on your golf irons, then TaylorMade P790 is just the set you've been looking for. ... Callaway Golf 2019 Apex Smoke Irons Set. ... Wilson Staff D7 Forged Golf Iron Set.
What are Japanese version golf clubs?
What Are the Popular Japanese Golf Clubs on the Market? The three most popular brands of Japanese golf clubs are Mizuno, Honma, and Miura.
Where are Mizuno clubs forged?
Chromoly Forged In 1968, Mizuno moved the production of its forged irons to the Chuo plant in Hiroshima – on the west coast of Japan.
Where are Pxg clubs made?
PXG clubs are manufactured in Asia and elsewhere, but otherwise PXG is an American company, with engineering, product development, marketing and other operations here.
How do I know if my golf clubs are forged?
The main difference in the two methods is this: in a cast process, there can be small air bubbles that are created in the process and when cool turn into tiny voids, whereas in forged clubs this does not occur, the metal is solid throughout.
Are TaylorMade irons forged?
Forged construction, soft-solid feel, and simplistic design come together in a pure players iron that's both workable and forgiving.
Do all pros use forged irons?
By the mid-1990s, only about half the players on the PGA Tour were using forged irons. In the 21st century, however, many forged irons incorporate design ideas made popular by cast-iron clubs. Even some cavity-back clubs, formerly the sole province of cast-iron manufacturers, are now being forged.
Is Callaway made in Japan?
Callaway Golf clubs are made in Asia, and then they are redistributed and sometimes assembled in other locations. The area in America where you can visit the Callaway assembly facility is in Carlsbad, California. Callaway is not actually manufacturing clubs in this facility.
What is the Japanese version of Callaway?
The designation Fujikura Speeder Evolution (black) is a made for Callaway shaft that is not a Speeder Evolution IV which is black in color. The JV 7 wood is 1/4" longer and the lie is 59 degrees vs 57 for US. Similarly the JV version is 150 cc volume vs 147 for US. The JV swing weight is D1 vs D2 for US.
What are the best selling golf clubs in Japan?
Our Best Japanese Golf Clubs in 2022Srixon Z 85 Hybrid (Best Hybrid Japanese Golf Club)HONMA Beres Driver (Best Premium Japanese Driver)Mizuno T20 Blue Ion (Best Japanese Golf Wedge)XXIO Fairway Wood (Best Japanese Club for Women)Mizuno M Craft (Best Japanese Putter)XXIO Men's X Irons (Best Japanese Irons for Men)More items...
What is the best Japanese golf club?
The Mizuno MP-650 Driver is by far one of the best Japanese Golf Clubs on the market today. The brands that originate from Japan are not as abundant. However, the clubs that we do find coming from them has a lot of value and quality added to them. Generally, these clubs come with an impressive steel quality and a lot of attention to detail.
What is the most famous golf brand?
Mizuno . Mizuno is probably one of the most famous brands, but they are not only renowned for their golf clubs, but also for the other sporting wear. Mizuno ’s clubs are not as expensive a brand like Miura and you should be able to find more clubs for your skill level here.
What is Miura golf club?
Miura is one of the oldest and most well-known Japanese brands and the brand generally makes use of the best steel when designing clubs. They might not be as affordable as many of the mainstream golf clubs, but once you start playing with them, you will feel the difference.
What is the best putter?
Best Putter: Tonino Lamborghini Golf Blade Putter. A putter is one of the most important pieces of golfing equipment that you can own. While the Tonino Lamborghini Golf Blade Putter is limited edition, the performance is excellent. It has also been constructed by the Honma brand.
Is Mizuno MP 650 expensive?
The Mizuno MP-650 Driver might be an expensive driver, but it features a design with a variety of materials. Not only does this improve forgiveness, but it can also reduce the drag of the club by up to 15% when playing:
What is the largest manufacturer of Japanese golf clubs?
Mizuno. Mizuno is certainly the largest manufacturer of Japanese golf clubs in terms of volume and is also played most often on the Tour - at least with the irons. Mizuno still relies on the "Grain Flow" technology and forges most of the irons. For some irons, this is no longer possible due to the design and they are cast.
Who made Miura golf clubs?
Miura is a relatively small forge in Japan, founded by Katsuhiro Miura. Miura started to forge golf clubs at the age of 16 and found several mistakes in the forging process at his original employer - at least in his opinion.
What is XXIO iron?
XXIO is a manufacturer that has only recently appeared on the map . It's not a brand you absolutely have to have heard of but if you have seen Ernie Els playing in the recent past you should have seen XXIO clubs at least once. XXIO is not particularly cheap but no comparison to Honma Beres either even though the target group is similar. XXIO irons are both forged and cast and all have a certain "Game Improvement" character. It's all about getting as much out of your swing as possible.
Where is Honma made?
That's the disadvantage if you don't have a completely industrialized production in China, but produce individually in Sakata, Japan. Honma is mainly known for the Beres series because they can also be very exclusive.
Where are MP irons made?
As a rule, however, the MP irons and wedges are classically forged in Japan. Irons as "Two Piece Construction" like the Hot Metals, on the other hand, are cast and are no longer manufactured in Japan. Mizuno is also a manufacturer of driver heads, which are now definitely competitive.
Is Srixon a good golf club?
However, there is no doubt that Srixon also produces very good golf clubs, especially irons. And it still does so very traditionally in Japan.
Is Vega cheaper than Miura?
Vega is also a small Japanese forge who, unlike Miura, also makes woods and drivers. Vega is a bit cheaper than Miura but not less exclusive.
What do you need to know about Japanese irons?
Japanese irons are not so popular without reason. They are manufactured extremely precisely and in a special way. Mostly forged with very soft steel under high pressure.
What is the best iron to replace Miura?
They also give the typical buttery soft Miura feel. A very good alternative to the Miura is the Honma TR20 V , which was voted the most wanted iron in this category by MyGolfSpy.
What is the difference between Honma and Miura?
This is the fundamental difference between Honma and Miura. With Honma the shaft selection is also very good and if one looks at the TWorld series with the many shaft options one will notice that no wishes remain open. With the Beres series you don't want any other shafts except the original Honma ArmRQ.
What is the best driving iron for 2021?
The best Driving Iron 2021. Unfortunately, the Honma TR747 Driving Iron is now sold out and we are eagerly awaiting a successor. Until then, we definitely recommend the Srixon ZX Utility. A Driving Iron with a compact head that nevertheless contains a lot of technology.
Why do players want a thin club?
Or some players want a club that is as thin as possible because it gives them a better feel in the setup position. If we can only give one recommendation, it is this: if you are not on one side or the other of the spectrum in any way, you are best advised to use a cavity back iron.
Can you adjust a Miura iron loft?
Especially the "classic" forged irons from Miura or Vega can be adjusted as often as desired without any problems. It is also possible that the loft has to be individualized. This is carved in stone by most major manufacturers and can no longer be adjusted afterwards.
Who plays Miura TC-201 irons?
These irons are also played by Tour Pro Abraham Ancer. They offer minimal offset, can be shaped in all directions and are forgiving enough for good players.
What metals are used to forge ironheads?
Any metallurgist will tell you that the typical carbon steel alloys used to forge ironheads are the easiest to formulate of any metal – meaning getting the right percentages of the Carbon, Manganese, Phosphorus, and Sulfur to mix in with the base metal of Iron are very easy to achieve.
Where are carbon steel iron heads made?
If you’re into golf clubs or spend time reading the various golf equipment internet forums, there are occasional discussions from which you could get the impression that forged carbon steel iron heads made in Japan are superior to those made anywhere else in the world.
What is the JDM club made of?
Let’s not pretend the Edo period has anything to do with forged irons. Some people actually believe JDM clubs are made with superior metals and magic pixie dust. Well, the metal part is true, but the pixie dust seems a little odd.
What are the factors that affect club tolerance?
1) stacking the tolerance of the other components 2) cost 3) cost. If a company is willing to spend the cash on a tighter tolerance shaft, grip and components it ’s they are more likely to build a club with tighter tolerances.
Why is tolerance important in golf?
The MOI affects the way the club release. One reason that tolerance is so important is that it creates some consistency in your set of clubs.
Ugo DeRosa
golfsmygame- I agree, Bridgestone makes some great irons, and the value is off the charts. But, I don't know if I follow you with respect to your general comments about the quality of American vs. Japanese irons, as there are no US-made irons anymore.
Harob11
I started out golfing using US clubs and have since turned into a hoarding Japanese club snob. Any good golfer can play well with any brand of clubs. However, for the people who put a premium on uniqueness, feel, attention to detail, etc.... you cannot beat what is offered over in Japan. From the packaging to forgings...
dalehead
I notice that Fourteen's irons, offered for sale in the US on their website have heads forged in China and Thailand. The clubs are assembled in Japan.
golfsmygame
I notice that Fourteen's irons, offered for sale in the US on their website have heads forged in China and Thailand. The clubs are assembled in Japan.
Ugo DeRosa
Correct, Endo does forge most of its clubs in its Thailand facility (like my '07 Callaway X-Forged for example), and those clubs are ones they forge for many OEM's. However, Endo's house brand, Epon, is still forged in Endo's Japan facility. I have a set of Epon 208 KGX wedges and they are fantastic.
jmvargas
if money were no object i would be bagging all JDM stuff except perhaps the putter...
jdanlaw
if money were no object i would be bagging all JDM stuff except perhaps the putter...
